Re: [RESULT][VOTE] Release ManifoldCF 0.1?
On Fri, Jan 7, 2011 at 2:51 PM, Karl Wright wrote: > Hi, > Grant was keen on including both a source and a source+binary > artifact. Thus, there is now an RC5 uploaded that has both. You can > compare this against the RC4 artifact, which has built docs but > nothing else built, which is also up there. Both these candidates > have been tagged, so we can pick either one. > > http://people.apache.org/~kwright/apache-manifoldcf-0.1-incubating > > Karl I've made changes to LICENSE.txt, NOTICE.txt, and README.txt according to incubator instructions. I will upload be uploading a new RC (RC6) accordingly shortly. Karl
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
;>>>>> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >>>>>>>>> >>>>>>>>>> Any news on this front? >>>>>>>>>> Karl >>>>>>>>>> >>>>>>>>>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright >>>>>>>>>> wrote: >>>>>>>>>>> I hope we can scrape together two more votes. Who else is on the >>>>>>>>>>> PPMC >>>>>>>>>>> for ManifoldCF? That's never been clear to me. >>>>>>>>>>> >>>>>>>>>>> Karl >>>>>>>>>>> >>>>>>>>>>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>>>>>>>>>> wrote: >>>>>>>>>>>> Yeah, sorry. It is the holidays for me. I hope to look at it on >>>>>>>>>>>> Monday. For the record, we need 3 votes from the PPMC and then I >>>>>>>>>>>> think we need to go to the Incubator PMC and vote there, but I >>>>>>>>>>>> will read up on it. >>>>>>>>>>>> >>>>>>>>>>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>>>>>>>>>> >>>>>>>>>>>>> It's most likely the holidays. Too much of a mad rush, either to >>>>>>>>>>>>> leave early or to get "real" work done to try to leave early. >>>>>>>>>>>>> >>>>>>>>>>>>> Sorry I wasn't able to find time to try out the RC. Hopefully... >>>>>>>>>>>>> next week will be slow and I'll have better luck finding a few >>>>>>>>>>>>> minutes of quiet time. >>>>>>>>>>>>> >>>>>>>>>>>>> -- Jack Krupansky >>>>>>>>>>>>> >>>>>>>>>>>>> -Original Message- From: Karl Wright >>>>>>>>>>>>> Sent: Friday, December 24, 2010 11:09 AM >>>>>>>>>>>>> To: connectors-dev >>>>>>>>>>>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>>>>>>>>>>> >>>>>>>>>>>>> There were zero votes in favor, and zero against. >>>>>>>>>>>>> >>>>>>>>>>>>> I feel little uncomfortable voting myself, since I put together >>>>>>>>>>>>> the >>>>>>>>>>>>> release. Therefore, the vote effectively fails. >>>>>>>>>>>>> >>>>>>>>>>>>> Karl >>>>>>>>>>>>> >>>>>>>>>>>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright >>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. >>>>>>>>>>>>>> (If >>>>>>>>>>>>>> this vote passes, I believe we will still need to hold a vote in >>>>>>>>>>>>>> the >>>>>>>>>>>>>> incubator general list.) >>>>>>>>>>>>>> Thanks, >>>>>>>>>>>>>> Karl >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>>> Grant Ingersoll >>>>>>>>>>>> http://www.lucidimagination.com >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Grant Ingersoll >>>>>>>>> http://www.lucidimagination.com >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>> >>>>> -- >>>>> Grant Ingersoll >>>>> http://www.lucidimagination.com >>>>> >>>>> >>> >>> -- >>> Grant Ingersoll >>> http://www.lucidimagination.com >>> >>> >> >
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
Hi all, The incubator required us to not include any built jars etc in the release, for space reasons. There were also a large number of other requests, which I've tried to fulfill. The upshot is that I think we're going to need to revote on this release. I would appreciate it if committers could download the new artifact at http://people.apache.org/~kwright and let me know if it still gets your +1. Thanks! Karl On Thu, Jan 6, 2011 at 8:40 AM, Karl Wright wrote: > Thanks for kicking this off! > I take it only the incubator PMC members are allowed to vote this time round? > Karl > > On Thu, Jan 6, 2011 at 8:08 AM, Grant Ingersoll wrote: >> I can do the stuff to mirror the releases, but it is pretty easy. It does >> look like we need to do an incubator vote. I will start that. >> >> -Grant >> >> On Jan 4, 2011, at 12:57 PM, Karl Wright wrote: >> >>> Also to be clear, the release will occur only when we tag the release >>> branch, and copy the RC to the download mirror. I actually do not >>> know how to do the latter step, and I probably don't have any of the >>> necessary magic powers either. So, once the incubator vote is done, >>> can someone point me at the correct documentation and/or walk me >>> through the process? The mirror folder I presumed we would be putting >>> the release in is "manifoldcf". >>> >>> Thanks! >>> Karl >>> >>> On Tue, Jan 4, 2011 at 12:41 PM, Grant Ingersoll >>> wrote: >>>> Just to be clear, before anyone puts up artifacts as releases, I think >>>> there are some other steps we need to go through (I believe we need a >>>> Incubator level vote, but let me check) >>>> >>>> -Grant >>>> >>>> On Jan 4, 2011, at 9:15 AM, Karl Wright wrote: >>>> >>>>> If anyone wants to add their key to the KEYS file, please feel free to >>>>> go ahead and do so on trunk. There's a release branch so you won't >>>>> mess anything up for the 0.1 release. >>>>> >>>>> Karl >>>>> >>>>> On Tue, Jan 4, 2011 at 9:11 AM, Simon Willnauer >>>>> wrote: >>>>>> I checked out all archives, verified the checksum & signatures. Looks >>>>>> all good. >>>>>> All tests passed for me after downloading and extracting the sources. >>>>>> >>>>>> I think we are good to go. >>>>>> >>>>>> here is my +1 - congratulations karl! >>>>>> >>>>>> simon >>>>>> >>>>>> PS: seems like we should have another keysigning party - only two >>>>>> keys there and karls is only signed by grant. >>>>>> >>>>>> On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: >>>>>>> +1 from me. >>>>>>> Karl >>>>>>> >>>>>>> On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll >>>>>>> wrote: >>>>>>>> Sorry for the long delay. I think we are in pretty good shape as far >>>>>>>> as the legal bits go. I also did an ant test and went over the >>>>>>>> signatures, LICENSE.txt, NOTICE.txt and checked out the license >>>>>>>> headers via RAT. >>>>>>>> >>>>>>>> For a 0.1 release, here's my +1. >>>>>>>> >>>>>>>> For the record, Karl, you can vote and it is binding. Other PPMC >>>>>>>> members are the committers, so they should check it out and vote too. >>>>>>>> >>>>>>>> -Grant >>>>>>>> >>>>>>>> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >>>>>>>> >>>>>>>>> Any news on this front? >>>>>>>>> Karl >>>>>>>>> >>>>>>>>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright >>>>>>>>> wrote: >>>>>>>>>> I hope we can scrape together two more votes. Who else is on the >>>>>>>>>> PPMC >>>>>>>>>> for ManifoldCF? That's never been clear to me. >>>>>>>>>> >>>>>>>>>> Karl >>>>>>>>>> >>>>>>>>>> On Fri, Dec 24, 201
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
Thanks for kicking this off! I take it only the incubator PMC members are allowed to vote this time round? Karl On Thu, Jan 6, 2011 at 8:08 AM, Grant Ingersoll wrote: > I can do the stuff to mirror the releases, but it is pretty easy. It does > look like we need to do an incubator vote. I will start that. > > -Grant > > On Jan 4, 2011, at 12:57 PM, Karl Wright wrote: > >> Also to be clear, the release will occur only when we tag the release >> branch, and copy the RC to the download mirror. I actually do not >> know how to do the latter step, and I probably don't have any of the >> necessary magic powers either. So, once the incubator vote is done, >> can someone point me at the correct documentation and/or walk me >> through the process? The mirror folder I presumed we would be putting >> the release in is "manifoldcf". >> >> Thanks! >> Karl >> >> On Tue, Jan 4, 2011 at 12:41 PM, Grant Ingersoll wrote: >>> Just to be clear, before anyone puts up artifacts as releases, I think >>> there are some other steps we need to go through (I believe we need a >>> Incubator level vote, but let me check) >>> >>> -Grant >>> >>> On Jan 4, 2011, at 9:15 AM, Karl Wright wrote: >>> >>>> If anyone wants to add their key to the KEYS file, please feel free to >>>> go ahead and do so on trunk. There's a release branch so you won't >>>> mess anything up for the 0.1 release. >>>> >>>> Karl >>>> >>>> On Tue, Jan 4, 2011 at 9:11 AM, Simon Willnauer >>>> wrote: >>>>> I checked out all archives, verified the checksum & signatures. Looks all >>>>> good. >>>>> All tests passed for me after downloading and extracting the sources. >>>>> >>>>> I think we are good to go. >>>>> >>>>> here is my +1 - congratulations karl! >>>>> >>>>> simon >>>>> >>>>> PS: seems like we should have another keysigning party - only two >>>>> keys there and karls is only signed by grant. >>>>> >>>>> On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: >>>>>> +1 from me. >>>>>> Karl >>>>>> >>>>>> On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll >>>>>> wrote: >>>>>>> Sorry for the long delay. I think we are in pretty good shape as far >>>>>>> as the legal bits go. I also did an ant test and went over the >>>>>>> signatures, LICENSE.txt, NOTICE.txt and checked out the license headers >>>>>>> via RAT. >>>>>>> >>>>>>> For a 0.1 release, here's my +1. >>>>>>> >>>>>>> For the record, Karl, you can vote and it is binding. Other PPMC >>>>>>> members are the committers, so they should check it out and vote too. >>>>>>> >>>>>>> -Grant >>>>>>> >>>>>>> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >>>>>>> >>>>>>>> Any news on this front? >>>>>>>> Karl >>>>>>>> >>>>>>>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright >>>>>>>> wrote: >>>>>>>>> I hope we can scrape together two more votes. Who else is on the PPMC >>>>>>>>> for ManifoldCF? That's never been clear to me. >>>>>>>>> >>>>>>>>> Karl >>>>>>>>> >>>>>>>>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>>>>>>>> wrote: >>>>>>>>>> Yeah, sorry. It is the holidays for me. I hope to look at it on >>>>>>>>>> Monday. For the record, we need 3 votes from the PPMC and then I >>>>>>>>>> think we need to go to the Incubator PMC and vote there, but I will >>>>>>>>>> read up on it. >>>>>>>>>> >>>>>>>>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>>>>>>>> >>>>>>>>>>> It's most likely the holidays. Too much of a mad rush, either to >>>>>>>>>>> leave early or to get "real" work done to try to leave early. >>>>
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
I can do the stuff to mirror the releases, but it is pretty easy. It does look like we need to do an incubator vote. I will start that. -Grant On Jan 4, 2011, at 12:57 PM, Karl Wright wrote: > Also to be clear, the release will occur only when we tag the release > branch, and copy the RC to the download mirror. I actually do not > know how to do the latter step, and I probably don't have any of the > necessary magic powers either. So, once the incubator vote is done, > can someone point me at the correct documentation and/or walk me > through the process? The mirror folder I presumed we would be putting > the release in is "manifoldcf". > > Thanks! > Karl > > On Tue, Jan 4, 2011 at 12:41 PM, Grant Ingersoll wrote: >> Just to be clear, before anyone puts up artifacts as releases, I think there >> are some other steps we need to go through (I believe we need a Incubator >> level vote, but let me check) >> >> -Grant >> >> On Jan 4, 2011, at 9:15 AM, Karl Wright wrote: >> >>> If anyone wants to add their key to the KEYS file, please feel free to >>> go ahead and do so on trunk. There's a release branch so you won't >>> mess anything up for the 0.1 release. >>> >>> Karl >>> >>> On Tue, Jan 4, 2011 at 9:11 AM, Simon Willnauer >>> wrote: >>>> I checked out all archives, verified the checksum & signatures. Looks all >>>> good. >>>> All tests passed for me after downloading and extracting the sources. >>>> >>>> I think we are good to go. >>>> >>>> here is my +1 - congratulations karl! >>>> >>>> simon >>>> >>>> PS: seems like we should have another keysigning party - only two >>>> keys there and karls is only signed by grant. >>>> >>>> On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: >>>>> +1 from me. >>>>> Karl >>>>> >>>>> On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll >>>>> wrote: >>>>>> Sorry for the long delay. I think we are in pretty good shape as far as >>>>>> the legal bits go. I also did an ant test and went over the signatures, >>>>>> LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. >>>>>> >>>>>> For a 0.1 release, here's my +1. >>>>>> >>>>>> For the record, Karl, you can vote and it is binding. Other PPMC >>>>>> members are the committers, so they should check it out and vote too. >>>>>> >>>>>> -Grant >>>>>> >>>>>> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >>>>>> >>>>>>> Any news on this front? >>>>>>> Karl >>>>>>> >>>>>>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: >>>>>>>> I hope we can scrape together two more votes. Who else is on the PPMC >>>>>>>> for ManifoldCF? That's never been clear to me. >>>>>>>> >>>>>>>> Karl >>>>>>>> >>>>>>>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>>>>>>> wrote: >>>>>>>>> Yeah, sorry. It is the holidays for me. I hope to look at it on >>>>>>>>> Monday. For the record, we need 3 votes from the PPMC and then I >>>>>>>>> think we need to go to the Incubator PMC and vote there, but I will >>>>>>>>> read up on it. >>>>>>>>> >>>>>>>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>>>>>>> >>>>>>>>>> It's most likely the holidays. Too much of a mad rush, either to >>>>>>>>>> leave early or to get "real" work done to try to leave early. >>>>>>>>>> >>>>>>>>>> Sorry I wasn't able to find time to try out the RC. Hopefully... >>>>>>>>>> next week will be slow and I'll have better luck finding a few >>>>>>>>>> minutes of quiet time. >>>>>>>>>> >>>>>>>>>> -- Jack Krupansky >>>>>>>>>> >>>>>>>>>> -Original Message- From: Karl Wright >>>>>>>>>> Sent: Friday, December 24, 2010 11:09 AM >>>>>>>>>> To: connectors-dev >>>>>>>>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>>>>>>>> >>>>>>>>>> There were zero votes in favor, and zero against. >>>>>>>>>> >>>>>>>>>> I feel little uncomfortable voting myself, since I put together the >>>>>>>>>> release. Therefore, the vote effectively fails. >>>>>>>>>> >>>>>>>>>> Karl >>>>>>>>>> >>>>>>>>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright >>>>>>>>>> wrote: >>>>>>>>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>>>>>>>>> this vote passes, I believe we will still need to hold a vote in the >>>>>>>>>>> incubator general list.) >>>>>>>>>>> Thanks, >>>>>>>>>>> Karl >>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Grant Ingersoll >>>>>>>>> http://www.lucidimagination.com >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>> >>>>>> -- >>>>>> Grant Ingersoll >>>>>> http://www.lucidimagination.com >>>>>> >>>>>> >>>>> >>>> >> >> -- >> Grant Ingersoll >> http://www.lucidimagination.com >> >> -- Grant Ingersoll http://www.lucidimagination.com
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
Also to be clear, the release will occur only when we tag the release branch, and copy the RC to the download mirror. I actually do not know how to do the latter step, and I probably don't have any of the necessary magic powers either. So, once the incubator vote is done, can someone point me at the correct documentation and/or walk me through the process? The mirror folder I presumed we would be putting the release in is "manifoldcf". Thanks! Karl On Tue, Jan 4, 2011 at 12:41 PM, Grant Ingersoll wrote: > Just to be clear, before anyone puts up artifacts as releases, I think there > are some other steps we need to go through (I believe we need a Incubator > level vote, but let me check) > > -Grant > > On Jan 4, 2011, at 9:15 AM, Karl Wright wrote: > >> If anyone wants to add their key to the KEYS file, please feel free to >> go ahead and do so on trunk. There's a release branch so you won't >> mess anything up for the 0.1 release. >> >> Karl >> >> On Tue, Jan 4, 2011 at 9:11 AM, Simon Willnauer >> wrote: >>> I checked out all archives, verified the checksum & signatures. Looks all >>> good. >>> All tests passed for me after downloading and extracting the sources. >>> >>> I think we are good to go. >>> >>> here is my +1 - congratulations karl! >>> >>> simon >>> >>> PS: seems like we should have another keysigning party - only two >>> keys there and karls is only signed by grant. >>> >>> On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: >>>> +1 from me. >>>> Karl >>>> >>>> On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll >>>> wrote: >>>>> Sorry for the long delay. I think we are in pretty good shape as far as >>>>> the legal bits go. I also did an ant test and went over the signatures, >>>>> LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. >>>>> >>>>> For a 0.1 release, here's my +1. >>>>> >>>>> For the record, Karl, you can vote and it is binding. Other PPMC members >>>>> are the committers, so they should check it out and vote too. >>>>> >>>>> -Grant >>>>> >>>>> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >>>>> >>>>>> Any news on this front? >>>>>> Karl >>>>>> >>>>>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: >>>>>>> I hope we can scrape together two more votes. Who else is on the PPMC >>>>>>> for ManifoldCF? That's never been clear to me. >>>>>>> >>>>>>> Karl >>>>>>> >>>>>>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>>>>>> wrote: >>>>>>>> Yeah, sorry. It is the holidays for me. I hope to look at it on >>>>>>>> Monday. For the record, we need 3 votes from the PPMC and then I >>>>>>>> think we need to go to the Incubator PMC and vote there, but I will >>>>>>>> read up on it. >>>>>>>> >>>>>>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>>>>>> >>>>>>>>> It's most likely the holidays. Too much of a mad rush, either to >>>>>>>>> leave early or to get "real" work done to try to leave early. >>>>>>>>> >>>>>>>>> Sorry I wasn't able to find time to try out the RC. Hopefully... next >>>>>>>>> week will be slow and I'll have better luck finding a few minutes of >>>>>>>>> quiet time. >>>>>>>>> >>>>>>>>> -- Jack Krupansky >>>>>>>>> >>>>>>>>> -Original Message- From: Karl Wright >>>>>>>>> Sent: Friday, December 24, 2010 11:09 AM >>>>>>>>> To: connectors-dev >>>>>>>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>>>>>>> >>>>>>>>> There were zero votes in favor, and zero against. >>>>>>>>> >>>>>>>>> I feel little uncomfortable voting myself, since I put together the >>>>>>>>> release. Therefore, the vote effectively fails. >>>>>>>>> >>>>>>>>> Karl >>>>>>>>> >>>>>>>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright >>>>>>>>> wrote: >>>>>>>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>>>>>>>> this vote passes, I believe we will still need to hold a vote in the >>>>>>>>>> incubator general list.) >>>>>>>>>> Thanks, >>>>>>>>>> Karl >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Grant Ingersoll >>>>>>>> http://www.lucidimagination.com >>>>>>>> >>>>>>>> >>>>>>> >>>>> >>>>> -- >>>>> Grant Ingersoll >>>>> http://www.lucidimagination.com >>>>> >>>>> >>>> >>> > > -- > Grant Ingersoll > http://www.lucidimagination.com > >
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
Just to be clear, before anyone puts up artifacts as releases, I think there are some other steps we need to go through (I believe we need a Incubator level vote, but let me check) -Grant On Jan 4, 2011, at 9:15 AM, Karl Wright wrote: > If anyone wants to add their key to the KEYS file, please feel free to > go ahead and do so on trunk. There's a release branch so you won't > mess anything up for the 0.1 release. > > Karl > > On Tue, Jan 4, 2011 at 9:11 AM, Simon Willnauer > wrote: >> I checked out all archives, verified the checksum & signatures. Looks all >> good. >> All tests passed for me after downloading and extracting the sources. >> >> I think we are good to go. >> >> here is my +1 - congratulations karl! >> >> simon >> >> PS: seems like we should have another keysigning party - only two >> keys there and karls is only signed by grant. >> >> On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: >>> +1 from me. >>> Karl >>> >>> On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll wrote: >>>> Sorry for the long delay. I think we are in pretty good shape as far as >>>> the legal bits go. I also did an ant test and went over the signatures, >>>> LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. >>>> >>>> For a 0.1 release, here's my +1. >>>> >>>> For the record, Karl, you can vote and it is binding. Other PPMC members >>>> are the committers, so they should check it out and vote too. >>>> >>>> -Grant >>>> >>>> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >>>> >>>>> Any news on this front? >>>>> Karl >>>>> >>>>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: >>>>>> I hope we can scrape together two more votes. Who else is on the PPMC >>>>>> for ManifoldCF? That's never been clear to me. >>>>>> >>>>>> Karl >>>>>> >>>>>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>>>>> wrote: >>>>>>> Yeah, sorry. It is the holidays for me. I hope to look at it on >>>>>>> Monday. For the record, we need 3 votes from the PPMC and then I think >>>>>>> we need to go to the Incubator PMC and vote there, but I will read up >>>>>>> on it. >>>>>>> >>>>>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>>>>> >>>>>>>> It's most likely the holidays. Too much of a mad rush, either to leave >>>>>>>> early or to get "real" work done to try to leave early. >>>>>>>> >>>>>>>> Sorry I wasn't able to find time to try out the RC. Hopefully... next >>>>>>>> week will be slow and I'll have better luck finding a few minutes of >>>>>>>> quiet time. >>>>>>>> >>>>>>>> -- Jack Krupansky >>>>>>>> >>>>>>>> -Original Message- From: Karl Wright >>>>>>>> Sent: Friday, December 24, 2010 11:09 AM >>>>>>>> To: connectors-dev >>>>>>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>>>>>> >>>>>>>> There were zero votes in favor, and zero against. >>>>>>>> >>>>>>>> I feel little uncomfortable voting myself, since I put together the >>>>>>>> release. Therefore, the vote effectively fails. >>>>>>>> >>>>>>>> Karl >>>>>>>> >>>>>>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright >>>>>>>> wrote: >>>>>>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>>>>>>> this vote passes, I believe we will still need to hold a vote in the >>>>>>>>> incubator general list.) >>>>>>>>> Thanks, >>>>>>>>> Karl >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Grant Ingersoll >>>>>>> http://www.lucidimagination.com >>>>>>> >>>>>>> >>>>>> >>>> >>>> -- >>>> Grant Ingersoll >>>> http://www.lucidimagination.com >>>> >>>> >>> >> -- Grant Ingersoll http://www.lucidimagination.com
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
+ 1 from me (although I still haven't found time to do testing with Solr.) -- Jack Krupansky -Original Message- From: Simon Willnauer Sent: Tuesday, January 04, 2011 9:11 AM To: connectors-dev@incubator.apache.org Subject: Re: [RESULT][VOTE] Release ManifoldCF 0.1? I checked out all archives, verified the checksum & signatures. Looks all good. All tests passed for me after downloading and extracting the sources. I think we are good to go. here is my +1 - congratulations karl! simon PS: seems like we should have another keysigning party - only two keys there and karls is only signed by grant. On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: +1 from me. Karl On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll wrote: Sorry for the long delay. I think we are in pretty good shape as far as the legal bits go. I also did an ant test and went over the signatures, LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. For a 0.1 release, here's my +1. For the record, Karl, you can vote and it is binding. Other PPMC members are the committers, so they should check it out and vote too. -Grant On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: Any news on this front? Karl On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: I hope we can scrape together two more votes. Who else is on the PPMC for ManifoldCF? That's never been clear to me. Karl On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll wrote: Yeah, sorry. It is the holidays for me. I hope to look at it on Monday. For the record, we need 3 votes from the PPMC and then I think we need to go to the Incubator PMC and vote there, but I will read up on it. On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: It's most likely the holidays. Too much of a mad rush, either to leave early or to get "real" work done to try to leave early. Sorry I wasn't able to find time to try out the RC. Hopefully... next week will be slow and I'll have better luck finding a few minutes of quiet time. -- Jack Krupansky -Original Message- From: Karl Wright Sent: Friday, December 24, 2010 11:09 AM To: connectors-dev Subject: [RESULT][VOTE] Release ManifoldCF 0.1? There were zero votes in favor, and zero against. I feel little uncomfortable voting myself, since I put together the release. Therefore, the vote effectively fails. Karl On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If this vote passes, I believe we will still need to hold a vote in the incubator general list.) Thanks, Karl -- Grant Ingersoll http://www.lucidimagination.com -- Grant Ingersoll http://www.lucidimagination.com
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
If anyone wants to add their key to the KEYS file, please feel free to go ahead and do so on trunk. There's a release branch so you won't mess anything up for the 0.1 release. Karl On Tue, Jan 4, 2011 at 9:11 AM, Simon Willnauer wrote: > I checked out all archives, verified the checksum & signatures. Looks all > good. > All tests passed for me after downloading and extracting the sources. > > I think we are good to go. > > here is my +1 - congratulations karl! > > simon > > PS: seems like we should have another keysigning party - only two > keys there and karls is only signed by grant. > > On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: >> +1 from me. >> Karl >> >> On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll wrote: >>> Sorry for the long delay. I think we are in pretty good shape as far as >>> the legal bits go. I also did an ant test and went over the signatures, >>> LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. >>> >>> For a 0.1 release, here's my +1. >>> >>> For the record, Karl, you can vote and it is binding. Other PPMC members >>> are the committers, so they should check it out and vote too. >>> >>> -Grant >>> >>> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >>> >>>> Any news on this front? >>>> Karl >>>> >>>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: >>>>> I hope we can scrape together two more votes. Who else is on the PPMC >>>>> for ManifoldCF? That's never been clear to me. >>>>> >>>>> Karl >>>>> >>>>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>>>> wrote: >>>>>> Yeah, sorry. It is the holidays for me. I hope to look at it on >>>>>> Monday. For the record, we need 3 votes from the PPMC and then I think >>>>>> we need to go to the Incubator PMC and vote there, but I will read up on >>>>>> it. >>>>>> >>>>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>>>> >>>>>>> It's most likely the holidays. Too much of a mad rush, either to leave >>>>>>> early or to get "real" work done to try to leave early. >>>>>>> >>>>>>> Sorry I wasn't able to find time to try out the RC. Hopefully... next >>>>>>> week will be slow and I'll have better luck finding a few minutes of >>>>>>> quiet time. >>>>>>> >>>>>>> -- Jack Krupansky >>>>>>> >>>>>>> -Original Message- From: Karl Wright >>>>>>> Sent: Friday, December 24, 2010 11:09 AM >>>>>>> To: connectors-dev >>>>>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>>>>> >>>>>>> There were zero votes in favor, and zero against. >>>>>>> >>>>>>> I feel little uncomfortable voting myself, since I put together the >>>>>>> release. Therefore, the vote effectively fails. >>>>>>> >>>>>>> Karl >>>>>>> >>>>>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: >>>>>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>>>>>> this vote passes, I believe we will still need to hold a vote in the >>>>>>>> incubator general list.) >>>>>>>> Thanks, >>>>>>>> Karl >>>>>>> >>>>>> >>>>>> -- >>>>>> Grant Ingersoll >>>>>> http://www.lucidimagination.com >>>>>> >>>>>> >>>>> >>> >>> -- >>> Grant Ingersoll >>> http://www.lucidimagination.com >>> >>> >> >
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
I checked out all archives, verified the checksum & signatures. Looks all good. All tests passed for me after downloading and extracting the sources. I think we are good to go. here is my +1 - congratulations karl! simon PS: seems like we should have another keysigning party - only two keys there and karls is only signed by grant. On Tue, Jan 4, 2011 at 3:03 AM, Karl Wright wrote: > +1 from me. > Karl > > On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll wrote: >> Sorry for the long delay. I think we are in pretty good shape as far as the >> legal bits go. I also did an ant test and went over the signatures, >> LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. >> >> For a 0.1 release, here's my +1. >> >> For the record, Karl, you can vote and it is binding. Other PPMC members >> are the committers, so they should check it out and vote too. >> >> -Grant >> >> On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: >> >>> Any news on this front? >>> Karl >>> >>> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: >>>> I hope we can scrape together two more votes. Who else is on the PPMC >>>> for ManifoldCF? That's never been clear to me. >>>> >>>> Karl >>>> >>>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>>> wrote: >>>>> Yeah, sorry. It is the holidays for me. I hope to look at it on Monday. >>>>> For the record, we need 3 votes from the PPMC and then I think we need >>>>> to go to the Incubator PMC and vote there, but I will read up on it. >>>>> >>>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>>> >>>>>> It's most likely the holidays. Too much of a mad rush, either to leave >>>>>> early or to get "real" work done to try to leave early. >>>>>> >>>>>> Sorry I wasn't able to find time to try out the RC. Hopefully... next >>>>>> week will be slow and I'll have better luck finding a few minutes of >>>>>> quiet time. >>>>>> >>>>>> -- Jack Krupansky >>>>>> >>>>>> -Original Message- From: Karl Wright >>>>>> Sent: Friday, December 24, 2010 11:09 AM >>>>>> To: connectors-dev >>>>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>>>> >>>>>> There were zero votes in favor, and zero against. >>>>>> >>>>>> I feel little uncomfortable voting myself, since I put together the >>>>>> release. Therefore, the vote effectively fails. >>>>>> >>>>>> Karl >>>>>> >>>>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: >>>>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>>>>> this vote passes, I believe we will still need to hold a vote in the >>>>>>> incubator general list.) >>>>>>> Thanks, >>>>>>> Karl >>>>>> >>>>> >>>>> -- >>>>> Grant Ingersoll >>>>> http://www.lucidimagination.com >>>>> >>>>> >>>> >> >> -- >> Grant Ingersoll >> http://www.lucidimagination.com >> >> >
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
+1 from me. Karl On Mon, Jan 3, 2011 at 3:20 PM, Grant Ingersoll wrote: > Sorry for the long delay. I think we are in pretty good shape as far as the > legal bits go. I also did an ant test and went over the signatures, > LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. > > For a 0.1 release, here's my +1. > > For the record, Karl, you can vote and it is binding. Other PPMC members are > the committers, so they should check it out and vote too. > > -Grant > > On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: > >> Any news on this front? >> Karl >> >> On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: >>> I hope we can scrape together two more votes. Who else is on the PPMC >>> for ManifoldCF? That's never been clear to me. >>> >>> Karl >>> >>> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll >>> wrote: >>>> Yeah, sorry. It is the holidays for me. I hope to look at it on Monday. >>>> For the record, we need 3 votes from the PPMC and then I think we need to >>>> go to the Incubator PMC and vote there, but I will read up on it. >>>> >>>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>>> >>>>> It's most likely the holidays. Too much of a mad rush, either to leave >>>>> early or to get "real" work done to try to leave early. >>>>> >>>>> Sorry I wasn't able to find time to try out the RC. Hopefully... next >>>>> week will be slow and I'll have better luck finding a few minutes of >>>>> quiet time. >>>>> >>>>> -- Jack Krupansky >>>>> >>>>> -Original Message- From: Karl Wright >>>>> Sent: Friday, December 24, 2010 11:09 AM >>>>> To: connectors-dev >>>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>>> >>>>> There were zero votes in favor, and zero against. >>>>> >>>>> I feel little uncomfortable voting myself, since I put together the >>>>> release. Therefore, the vote effectively fails. >>>>> >>>>> Karl >>>>> >>>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: >>>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>>>> this vote passes, I believe we will still need to hold a vote in the >>>>>> incubator general list.) >>>>>> Thanks, >>>>>> Karl >>>>> >>>> >>>> -- >>>> Grant Ingersoll >>>> http://www.lucidimagination.com >>>> >>>> >>> > > -- > Grant Ingersoll > http://www.lucidimagination.com > >
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
Sorry for the long delay. I think we are in pretty good shape as far as the legal bits go. I also did an ant test and went over the signatures, LICENSE.txt, NOTICE.txt and checked out the license headers via RAT. For a 0.1 release, here's my +1. For the record, Karl, you can vote and it is binding. Other PPMC members are the committers, so they should check it out and vote too. -Grant On Jan 3, 2011, at 6:11 AM, Karl Wright wrote: > Any news on this front? > Karl > > On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: >> I hope we can scrape together two more votes. Who else is on the PPMC >> for ManifoldCF? That's never been clear to me. >> >> Karl >> >> On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll wrote: >>> Yeah, sorry. It is the holidays for me. I hope to look at it on Monday. >>> For the record, we need 3 votes from the PPMC and then I think we need to >>> go to the Incubator PMC and vote there, but I will read up on it. >>> >>> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >>> >>>> It's most likely the holidays. Too much of a mad rush, either to leave >>>> early or to get "real" work done to try to leave early. >>>> >>>> Sorry I wasn't able to find time to try out the RC. Hopefully... next week >>>> will be slow and I'll have better luck finding a few minutes of quiet time. >>>> >>>> -- Jack Krupansky >>>> >>>> -Original Message- From: Karl Wright >>>> Sent: Friday, December 24, 2010 11:09 AM >>>> To: connectors-dev >>>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>>> >>>> There were zero votes in favor, and zero against. >>>> >>>> I feel little uncomfortable voting myself, since I put together the >>>> release. Therefore, the vote effectively fails. >>>> >>>> Karl >>>> >>>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: >>>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>>> this vote passes, I believe we will still need to hold a vote in the >>>>> incubator general list.) >>>>> Thanks, >>>>> Karl >>>> >>> >>> -- >>> Grant Ingersoll >>> http://www.lucidimagination.com >>> >>> >> -- Grant Ingersoll http://www.lucidimagination.com
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
Any news on this front? Karl On Sun, Dec 26, 2010 at 6:27 PM, Karl Wright wrote: > I hope we can scrape together two more votes. Who else is on the PPMC > for ManifoldCF? That's never been clear to me. > > Karl > > On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll wrote: >> Yeah, sorry. It is the holidays for me. I hope to look at it on Monday. >> For the record, we need 3 votes from the PPMC and then I think we need to go >> to the Incubator PMC and vote there, but I will read up on it. >> >> On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: >> >>> It's most likely the holidays. Too much of a mad rush, either to leave >>> early or to get "real" work done to try to leave early. >>> >>> Sorry I wasn't able to find time to try out the RC. Hopefully... next week >>> will be slow and I'll have better luck finding a few minutes of quiet time. >>> >>> -- Jack Krupansky >>> >>> -Original Message- From: Karl Wright >>> Sent: Friday, December 24, 2010 11:09 AM >>> To: connectors-dev >>> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >>> >>> There were zero votes in favor, and zero against. >>> >>> I feel little uncomfortable voting myself, since I put together the >>> release. Therefore, the vote effectively fails. >>> >>> Karl >>> >>> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: >>>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>>> this vote passes, I believe we will still need to hold a vote in the >>>> incubator general list.) >>>> Thanks, >>>> Karl >>> >> >> -- >> Grant Ingersoll >> http://www.lucidimagination.com >> >> >
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
I hope we can scrape together two more votes. Who else is on the PPMC for ManifoldCF? That's never been clear to me. Karl On Fri, Dec 24, 2010 at 4:04 PM, Grant Ingersoll wrote: > Yeah, sorry. It is the holidays for me. I hope to look at it on Monday. > For the record, we need 3 votes from the PPMC and then I think we need to go > to the Incubator PMC and vote there, but I will read up on it. > > On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: > >> It's most likely the holidays. Too much of a mad rush, either to leave early >> or to get "real" work done to try to leave early. >> >> Sorry I wasn't able to find time to try out the RC. Hopefully... next week >> will be slow and I'll have better luck finding a few minutes of quiet time. >> >> -- Jack Krupansky >> >> -Original Message- From: Karl Wright >> Sent: Friday, December 24, 2010 11:09 AM >> To: connectors-dev >> Subject: [RESULT][VOTE] Release ManifoldCF 0.1? >> >> There were zero votes in favor, and zero against. >> >> I feel little uncomfortable voting myself, since I put together the >> release. Therefore, the vote effectively fails. >> >> Karl >> >> On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: >>> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >>> this vote passes, I believe we will still need to hold a vote in the >>> incubator general list.) >>> Thanks, >>> Karl >> > > -- > Grant Ingersoll > http://www.lucidimagination.com > >
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
Yeah, sorry. It is the holidays for me. I hope to look at it on Monday. For the record, we need 3 votes from the PPMC and then I think we need to go to the Incubator PMC and vote there, but I will read up on it. On Dec 24, 2010, at 11:17 AM, Jack Krupansky wrote: > It's most likely the holidays. Too much of a mad rush, either to leave early > or to get "real" work done to try to leave early. > > Sorry I wasn't able to find time to try out the RC. Hopefully... next week > will be slow and I'll have better luck finding a few minutes of quiet time. > > -- Jack Krupansky > > -Original Message- From: Karl Wright > Sent: Friday, December 24, 2010 11:09 AM > To: connectors-dev > Subject: [RESULT][VOTE] Release ManifoldCF 0.1? > > There were zero votes in favor, and zero against. > > I feel little uncomfortable voting myself, since I put together the > release. Therefore, the vote effectively fails. > > Karl > > On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: >> +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If >> this vote passes, I believe we will still need to hold a vote in the >> incubator general list.) >> Thanks, >> Karl > -- Grant Ingersoll http://www.lucidimagination.com
Re: [RESULT][VOTE] Release ManifoldCF 0.1?
It's most likely the holidays. Too much of a mad rush, either to leave early or to get "real" work done to try to leave early. Sorry I wasn't able to find time to try out the RC. Hopefully... next week will be slow and I'll have better luck finding a few minutes of quiet time. -- Jack Krupansky -Original Message- From: Karl Wright Sent: Friday, December 24, 2010 11:09 AM To: connectors-dev Subject: [RESULT][VOTE] Release ManifoldCF 0.1? There were zero votes in favor, and zero against. I feel little uncomfortable voting myself, since I put together the release. Therefore, the vote effectively fails. Karl On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If this vote passes, I believe we will still need to hold a vote in the incubator general list.) Thanks, Karl
[RESULT][VOTE] Release ManifoldCF 0.1?
There were zero votes in favor, and zero against. I feel little uncomfortable voting myself, since I put together the release. Therefore, the vote effectively fails. Karl On Sun, Dec 19, 2010 at 7:33 PM, Karl Wright wrote: > +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If > this vote passes, I believe we will still need to hold a vote in the > incubator general list.) > Thanks, > Karl >
Re: [VOTE] Release ManifoldCF 0.1?
I strongly encourage you to try it out. That's kind of what the vote is about. I will hold happily hold the vote open until Thursday evening. Karl On Sun, Dec 19, 2010 at 7:39 PM, Jack Krupansky wrote: > I'm inclined to go ahead with a +1, but maybe it would be advisable to give > the RC a couple of days. (And maybe I'll finally get around to trying it out > as well.) If nobody objects by Wednesday/Thursday - and there are some +1's > - go ahead and say its done. > > -- Jack Krupansky > > -Original Message- From: Karl Wright > Sent: Sunday, December 19, 2010 7:33 PM > To: connectors-dev > Subject: [VOTE] Release ManifoldCF 0.1? > > +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If > this vote passes, I believe we will still need to hold a vote in the > incubator general list.) > Thanks, > Karl >
Re: [VOTE] Release ManifoldCF 0.1?
I'm inclined to go ahead with a +1, but maybe it would be advisable to give the RC a couple of days. (And maybe I'll finally get around to trying it out as well.) If nobody objects by Wednesday/Thursday - and there are some +1's - go ahead and say its done. -- Jack Krupansky -Original Message- From: Karl Wright Sent: Sunday, December 19, 2010 7:33 PM To: connectors-dev Subject: [VOTE] Release ManifoldCF 0.1? +1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If this vote passes, I believe we will still need to hold a vote in the incubator general list.) Thanks, Karl
[VOTE] Release ManifoldCF 0.1?
+1 if you think ManifoldCF 0.1 is ready for release, -1 if not. (If this vote passes, I believe we will still need to hold a vote in the incubator general list.) Thanks, Karl
