Re: [DNG] Please don't fall fo Mikee USA's bait
Thank you for moderating. I just report everything I receive from him as spam. Thanks Bruce On Sun, Jan 6, 2019 at 7:15 PM wrote: > > Hi all, > > Heads up! > > MikeeUSA is trying again but his posts are being held in moderation. So > now he is posting to dng and copying to individual dng members in hopes > that one of you will respond and post his message 2nd hand. Please be > mindful of the headers and do not fall for the bait! > > golinux > ___ > Dng mailing list > Dng@lists.dyne.org > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] Please don't fall fo Mikee USA's bait
Hi all, Heads up! MikeeUSA is trying again but his posts are being held in moderation. So now he is posting to dng and copying to individual dng members in hopes that one of you will respond and post his message 2nd hand. Please be mindful of the headers and do not fall for the bait! golinux ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] SOLVED: slashes in FAT file names
On Sun, Jan 06, 2019 at 10:04:19PM +0100, Adam Borowski wrote: > On Sun, Jan 06, 2019 at 01:10:04PM -0500, Hendrik Boom wrote: > > > > Well, it *was* 32G. That takes a while just to read *once*. > > Hint: in almost any rescue operation, the recommended first step is to dd > the whole disk to another place -- doubly so if the source is so small. I did that. Still slow. > > Even if you're on just a shit SATA SSD, reading at 500MB/s is a wee bit > nicer than at 4MB/s -- usually you need to read more than once. Agreed. And that program did seem to read it more than once. Mayne it would have done better with a different file type, but I had to look for the files that were probably there, not others. > > And then, you can snapshot, repair, etc, the image to your heart content > without a risk of breaking things further. The hex editor I did use directly no the original disk. And it worked. I figured that if something really weird happened as a result of the rather innocuous-looking changes I was making I could always copy it back from the 32G copy I had on my SSD. -- hendrik ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] Added desktop-live to the install guides
On 2019-01-01 15:40, Arnt Karlsen wrote: ..these from https://devuan.org/os/filenaming could use clarification: desktop-live: refracta installer for bios or uefi (recommended for reviews) ..this gives "tech" magazine writers the best impression to base their review story on? I have pushed changes for the Visual guides to master and also a few other tweaks including the one mentioned above. That list on the filenaming page is now more aligned with the other iso lists. I also rewrote/reorganized the "Package repositories" partial which appears in several places. I am now going through that entire thread to see if I missed anything. At some point one other guide will appear for the desktop-live cli install. Thanks to all for the suggestions. golinux ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] SOLVED: slashes in FAT file names
On Sun, Jan 06, 2019 at 01:10:04PM -0500, Hendrik Boom wrote: > On Thu, Jan 03, 2019 at 11:26:43AM +0200, Eric Pozharski wrote: > > On Tue, Jan 01, 2019 at 06:22:34PM -0500, Hendrik Boom wrote: > > > Far too slow. Running for a full 18 hours found nothing, and it > > > looked as if it had searched ony a fraction of the 32G SDXC card. > > Well, it *was* 32G. That takes a while just to read *once*. Hint: in almost any rescue operation, the recommended first step is to dd the whole disk to another place -- doubly so if the source is so small. Even if you're on just a shit SATA SSD, reading at 500MB/s is a wee bit nicer than at 4MB/s -- usually you need to read more than once. And then, you can snapshot, repair, etc, the image to your heart content without a risk of breaking things further. Meow! -- ⢀⣴⠾⠻⢶⣦⠀ Hans 1 was born and raised in Johannesburg, then moved to Boston, ⣾⠁⢠⠒⠀⣿⡁ and has just became a naturalized citizen. Hans 2's grandparents ⢿⡄⠘⠷⠚⠋⠀ came from Melanesia to Düsseldorf, and he hasn't ever been outside ⠈⠳⣄ Germany until yesterday. Which one is an African-American? ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] 3.4.9 rtai kernel?
Hi Aitor, Am Sonntag, 6. Januar 2019 schrieb aitor_czr: > Hi Nikolaus, > > On 1/6/19 11:12 AM, Dr. Nikolaus Klepp wrote: > > At the speed PREEMPT-RT improves we'll stick with 3.X kernels on linuxcnc > > for a long, long, time :-/ > > I had a look at the code of linuxcnc a few months ago and i was tempted > to contribute to the project, but i still didn't start working on that :) > > https://github.com/LinuxCNC/linuxcnc > > On the other hand, the Path Workbench used in FreeCAD also works pretty > fine: > > http://gnuinos.org/freecad.png Yes, that looks good. I must confess that I never went that far with FreeCAD, most likely I did not grasp the intented logic behind the GUI :-) nik > > Cheers, > > Aitor. > > > > -- Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ... ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] SOLVED: slashes in FAT file names
On Thu, Jan 03, 2019 at 11:26:43AM +0200, Eric Pozharski wrote: > On Tue, Jan 01, 2019 at 06:22:34PM -0500, Hendrik Boom wrote: > > *SKIP* > > I tried magicrescue. But it kept finding many many starts for mp3 > > files, and running a script for each one to see if it was really and > > mp3 file, in the course of which writing file hundreds of megbytes > > long, deciding it wasn't mp3 after all and deleting it. > > > > Far too slow. Running for a full 18 hours found nothing, and it > > looked as if it had searched ony a fraction of the 32G SDXC card. Well, it *was* 32G. That takes a while just to read *once*. > > Sorry for wasting your time -- I didn't know this component is in such > bad shape. Not wasted. I learned, and was expecting some solutions to turn out impractical. There will likely be other circumstances where it does help, and now I know it exists. > > > I then used WxHexEdit, a hex editor, in immediate update mode. It found > > the troublesome file names, and I replaced the slashes by zeros. After > > that it was easy to read those files. > > Are we cool now? Yes. -- hendrik ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] SOLVED: slashes in FAT file names
On Tue, Jan 01, 2019 at 06:22:34PM -0500, Hendrik Boom wrote: *SKIP* > I tried magicrescue. But it kept finding many many starts for mp3 > files, and running a script for each one to see if it was really and > mp3 file, in the course of which writing file hundreds of megbytes > long, deciding it wasn't mp3 after all and deleting it. > > Far too slow. Running for a full 18 hours found nothing, and it > looked as if it had searched ony a fraction of the 32G SDXC card. Sorry for wasting your time -- I didn't know this component is in such bad shape. > I then used WxHexEdit, a hex editor, in immediate update mode. It found > the troublesome file names, and I replaced the slashes by zeros. After > that it was easy to read those files. Are we cool now? -- Torvalds' goal for Linux is very simple: World Domination Stallman's goal for GNU is even simpler: Freedom ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] 3.4.9 rtai kernel?
Hi Nikolaus, On 1/6/19 11:12 AM, Dr. Nikolaus Klepp wrote: At the speed PREEMPT-RT improves we'll stick with 3.X kernels on linuxcnc for a long, long, time :-/ I had a look at the code of linuxcnc a few months ago and i was tempted to contribute to the project, but i still didn't start working on that :) https://github.com/LinuxCNC/linuxcnc On the other hand, the Path Workbench used in FreeCAD also works pretty fine: http://gnuinos.org/freecad.png Cheers, Aitor. ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] 3.4.9 rtai kernel?
Am Samstag, 5. Januar 2019 schrieb Arnt Karlsen: > On Sat, 5 Jan 2019 14:07:21 +0100, Dr. wrote in message > <201901051407.21071.dr.kl...@gmx.at>: > > > Am Samstag, 5. Januar 2019 schrieb Arnt Karlsen: > > > On Sat, 5 Jan 2019 04:13:22 -0500, Steve wrote in message > > > <20190105041322.13e04...@mydesk.domain.cxm>: > > > > > > > Hi all, > > > > > > > > Someone asked whether you can run a 3.4.9 rtai kernel on Devuan. > > > > So I'm asking here. > > > > > > ..why an old a 3.4.9 rtai kernel and not e.g. > > > linux-image-4.18.0-0.bpo.3-rt-amd64, now at version 4.18.20-2~bpo9+1 > > > with PREEMPT, RT etc? > > > > > > > > > > PREEMPT-RT gives absolutely horrible latency figures on older > > hardware and amd64 (this is from a T60): RTAI ~ 2000ns, RT ~ 15ns > > on the same hardware, with latency spikes now and then of up to 5 > > seconds (again, depending on individual hardware, even seamingly > > identical systems do not give consistent results). The latest > > linuxcnc-patched PREEMPT still gives ~ 2ns on the same hardware, > > that's ~ 10 times worse than RTAI. Additionall, when running 2 > > realtime threads, RTAI gives a reliable latency over different > > baseperiods. On Linuxcnc that means that latency of the servothread > > at 100ns and the basthread of ZZZ ns (default 25000, but usually > > you adjust it to be just 20% longer than the measured latency) are > > independent. With PREEMPT that's not the case: Latency spikes > > erratic, depending on the ratio servoperiode to baseperiode and the > > airpressure in the vally of the kings. when baseperiode 25000 gives a > > latency of 1 then on RTAI you could savely run a baseperiode of > > 12000. On PREEMPT you most likely will lock your system doing the > > same. Even worse, enlarging the baseperiode to 3 does not > > guarnatee that the latency stays the same or gets better, just on the > > contrary: it can spike up to 10, and a baseperiode of 5 might > > give again 1 latency. This behavour is most irritating and points > > to a well hidden bug just waiting to suck your blood and time or ruin > > your parts. If you get a RTAI kernel working for your system, you > > will definitly want to stick with it. With PREEMPT you are on the > > "interesting" side of live. > > ..there is _some_ improvement on the PREEMPT-RT side: > http://linuxgizmos.com/real-time-linux-explained/ > At the speed PREEMPT-RT improves we'll stick with 3.X kernels on linuxcnc for a long, long, time :-/ -- Please do not email me anything that you are not comfortable also sharing with the NSA, CIA ... ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] live-sdk + debian-installer worked on devuan beowulf
On 1/6/19 10:27 AM, aitor_czr wrote: Yesterday i built a minimal image of devuan beowulf using the live-sdk: http://gnuinos.org/devuan%20beowulf/ All the packages are official packages of devuan taken from deb.devuan.org ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] live-sdk + debian-installer worked on devuan beowulf
Hi all, Yesterday i built a minimal image of devuan beowulf using the live-sdk: http://gnuinos.org/devuan%20beowulf/ The wired network connection worked during the live-session and also after a hard disk installation using debian-installer. Just a few changes and i'll share the code of the blend for the live-sdk. Cheers, Aitor. ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng