Re: Dislike the way port conflicts are handled now
On Sunday 17 January 2010 10:24:43 Matthew Seaman wrote: Ion-Mihai Tetcu wrote: I'd be very happy if I could: - fetch the distfiles, even if I have a conflicting port installed - be able to use portmaster -o to switch from one port to an other one that conflicts with it. - be able to at least compile a port (eg. for testing) without having to de-install the current one. I'm all in favor of restoring the old behavior with a switch available to turn on the new one. +1 Although a big fat warning message at fetch or build phase when operating on a port with conflicts wouldn't go amiss. I'd agree with this too. The idea of the change seems to be to protect people from wasting time downloading and building something which they can't install without resolving a conflict. How exactly was that wasted time? Surely you don't download and build a port you're not going to install? What the change actually does is penalise people who want to download and build regardless of conflicts, to reduce the time between uninstalling the conflicting port and being able to install the replacement. This seems to me to be a very badly thought-out change which should be reverted. Jonathan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Q: recommendation for external USB disk
El día Thursday, January 14, 2010 a las 01:40:26PM +0100, Bas Smeelen escribió: It's only one partition. I created it with sysinstall. fb1:/ # fdisk /dev/da1 *** Working on device /dev/da1 *** parameters extracted from in-core disklabel are: cylinders=182401 heads=255 sectors/track=63 (16065 blks/cyl) Figures below won't work with BIOS for partitions not in cyl 1 parameters to be used for BIOS calculations are: cylinders=182401 heads=255 sectors/track=63 (16065 blks/cyl) Media sector size is 512 Warning: BIOS sector numbering starts with sector 1 Information from DOS bootblock is: The data for partition 1 is: sysid 165 (0xa5),(FreeBSD/NetBSD/386BSD) start 63, size 2930272002 (1430796 Meg), flag 80 (active) beg: cyl 0/ head 1/ sector 1; end: cyl 1023/ head 254/ sector 63 The data for partition 2 is: UNUSED The data for partition 3 is: UNUSED The data for partition 4 is: UNUSED fb1:/ # bsdlabel /dev/da1s1 # /dev/da1s1: 8 partitions: #size offsetfstype [fsize bsize bps/cpg] c: 29302720020unused0 0 # raw part, don't edit d: 293027200204.2BSD 2048 16384 28552 I've got my device and it comes with a pre-formatted msdosfs which can be mounted with: # mount -t msdosfs -o large /dev/da0s1 /mnt # df -kh /mnt current# df -kh FilesystemSizeUsed Avail Capacity Mounted on /dev/da0s11.4T115M1.4T 0%/mnt I only want to use it as backup (created with dump(1M)) and I think it's better to make an UFS on it; matthias -- Matthias Apitz t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211 e g...@unixarea.de - w http://www.unixarea.de/ Vote NO to EU The Lisbon Treaty: http://www.no-means-no.eu ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
fresh software for freebsd - build service
The amount of available software for FreeBSD could largely be improved by the availablility of a Build Service. In this regard I have opened up a request to provide a FreeBSD target for the openSUSE Build Service. It allows users to compile any software found on the internet in a clean development environment, make it available to other users and provide updates regularely by automatic re-compiling. I believe that would ease porting software that is already available for Linux to FreeBSD considerably. vote for it if you are interested: https://features.opensuse.org/308617 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rum0 acting as an Access point (belkin router) 8.0 R
Paul B Mahol schrieb: On 1/15/10, Christoph Kukulies k...@kukulies.org wrote: I'm not sure wether syntax has changed but I wanted to cretae an wlan acess point and tried various things. Under 7.0 I got it working with the following command ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE wepmode on wepkey 0xf00baf00ba weptxkey 1 channel 1 I tried this but got a socket error Invalid argument. Then I tried (from an example in the rum (4) manpage):ifconfig wlan create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1 Perhaps you want this one: ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1 I tried this in rc.conf: ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1 I got this: rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290 ether 00:11:50:cb:52:10 media: IEEE 802.11 Wireless Ethernet autoselect adhoc (autoselect adhoc) status: no carrier Why no carrier? And I would expect more info on the interface like SSID and such. -- Christoph and got: wlan0 ifconfig: SIOCSIFMEDIA (media): Device not configured But suddenly the wlan0 device is there. Can anybody fill me in? -- Christoph ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: gmirror+gjournal: spontaneous reboots on excessive disk access
Michael Grimm wrote: Hi -- I'm running a gmirror raid1 plus gjournal for a year now. This is a 7.2-RELEASE-p6 right now. Both disks are regular ATA and healthy according smartctl. Sometimes, not always though, I do experience spontaneous reboots without leaving any hints in logfiles whenver I beat my disks excessively. This might be something like: dd if=/dev/null of=/some/file bs=1M count=4k plus parallel disk accesses by mail and news server. If I omit all parallel disk access those dd's will run to completion without reboots, always. What you have is a common symptom of hardware problems - either a weak power supply or a broken disk controller. In the first case because two drives try to suck power where only one was doing it before and in the second reason because the disk controller is too broken to correctly handle simultaneous access to two drives. Unfortunately, if you don't get any console error messages it is hard to tell which. The power supply is usually easier to replace. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rum0 acting as an Access point (belkin router) 8.0 R
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1:0xBC45AD1BD5 ssid
ReseauWIFI
Maybe your problem is that wepkey is malformatted in your command
If not, I didn't try to understand, but I also had troubles with the
position of SSID keyword.
(ifconfig arg error, might be your problem)
(btw: I also had problem with ssid containing spaced characters)
Later, I tried to set it up as an hostap, it seems to work well.
But when I try to connect from an other computer, I'm unable to to join the
network.
(running under 7.2, I compiled the kernel adding a define matching my
device, based on a similar (I hope so...) chipset)
good luck
Samuel Martín Moro
CamTrace
{EPITECH.} tek4
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess point
and tried various things. Under 7.0 I got it working with the following
command
ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE wepmode
on wepkey 0xf00baf00ba weptxkey 1 channel 1
I tried this but got a socket error Invalid argument.
Then I tried (from an example in the rum (4) manpage):ifconfig wlan
create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on
wepkey 0xf00baaf00baa weptxkey 1 channel 1
Perhaps you want this one:
ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I tried this in rc.conf:
ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I got this:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect adhoc (autoselect
adhoc)
status: no carrier
Why no carrier?
And I would expect more info on the interface like SSID and such.
--
Christoph
and got:
wlan0
ifconfig: SIOCSIFMEDIA (media): Device not configured
But suddenly the wlan0 device is there.
Can anybody fill me in?
--
Christoph
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
freebsd-questions-unsubscr...@freebsd.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Dislike the way port conflicts are handled now
Argh! Stop! I wish that people who felt the need to add to this thread would read the prior posts beforehand, and consider their comments before posting. To answer two previous posts: I believe that he is talking about changing _when_ the check for conflicts is made; whereas DISABLE_CONFLICTS ignores the check, regardless of when it is made. A late check is preferable to using DISABLE_CONFLICTS, because with that knob you can shoot yourself in the foot by mistakenly installing one port on top of another. I think the point is you can make -DDISABLE_CONFLICTS using targets other than install ?! Obviously, you can use it for other targets. That doesn't seem to have been in doubt. The point is rather that if one disables the conflicts check and then accidentally uses the 'install' target or another target requiring 'install', and there is a conflicting port already installed, there are going to be problems. Of course that wouldn't be a good idea, but it can happen, and that is the point of having a check. -- The idea of the change seems to be to protect people from wasting time downloading and building something which they can't install without resolving a conflict. In two earlier posts, a member of portmgr@, and someone else described how the change was also meant to prevent some build errors. How exactly was that wasted time? Surely you don't download and build a port you're not going to install? A number of earlier posters have said that they want to do exactly that. I do it myself, to test ports. But one can also start with the intention of installing port A, only to later learn that it conflicts with an already-installed port B, and then, having discovered the conflict, decide not to install port A after all, in order to keep port B. In this case, which happens fairly often, any time spent before the discovery of the conflict would have been wasted. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rum0 acting as an Access point (belkin router) 8.0 R
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote: Paul B Mahol schrieb: On 1/15/10, Christoph Kukulies k...@kukulies.org wrote: I'm not sure wether syntax has changed but I wanted to cretae an wlan acess point and tried various things. Under 7.0 I got it working with the following command ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE wepmode on wepkey 0xf00baf00ba weptxkey 1 channel 1 I tried this but got a socket error Invalid argument. Then I tried (from an example in the rum (4) manpage):ifconfig wlan create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1 Perhaps you want this one: ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1 I tried this in rc.conf: ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1 I got this: rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290 ether 00:11:50:cb:52:10 media: IEEE 802.11 Wireless Ethernet autoselect adhoc (autoselect adhoc) status: no carrier Why no carrier? You still did not created wlan0 interface: Put wlans_rum0=wlan0 in rc.conf, and instead of ifconfig_rum0=. use ifconfig_wlan0=. -- Paul B Mahol ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
E-commerce Gateway
E-commerce Payment Gateway Solution: (E-commerce Gateway Solution for United States and Canadian Merchants) Federated Payments- USA Merchant Accounts MSI Canada- Canadian Merchant Accounts About Us Federated Payments / MSI Canada is a credit card payment processor in the United States and Canadian marketplace. We have an “A” Industry Rating with the BBB (Better Business Bureau) and annually process over 2 billion dollars in credit card payment transactions. Established in 1998, Federated Payments recently took its place as one of the Top 50 Payment Processors in the Industry and is considered the fastest growing Processor according to the Neilson Report. We service more than 20,000 merchants across the country and employ 150 sales support and technical staff in the United States and Canada. Federated Payments operates as Merchant Services Inc. Canada (MSI Canada) as its Canadian operations. Recognizing the Gateway Problem We are aware of the difficulties web developers experience when adding shopping carts to sites and then to face security compliance issues when Payment Gateways are to be integrated. In most cases, the client’s bank does not support an online payment gateway solution. This begins the clients search to find the right bank that will approve or provide a payment gateway that can comply to the shopping cart security standards. After this step is complete, the client is left to babysit the bank to ensure correspondence is maintained with the web developer until task is complete. For any developer, dropping the ball at the end is simply bad practice hence integrating PayPal saves the client from anguish and despair temporarily. PayPal charges high credit card processing rates which leads to even more client despair in the end. Professionalism is lost when the gateway page re-directs the customer to a process he is not interested in fulfilling. PayPal should be considered an additional feature and not the primary gateway function. Required customer sign-ups and account verification processes deter customers from returning to PayPal sites. Client loses retention momentum. SafePay Solution The SafePay Gateway Program is a solution for merchants to process online in a secured manner without giving up large profits for processing. We offer the “Lowest Rate Guarantee” to every client that comes on board. Included with the SafePay Program is the Backend Gateway which enables clients a backend to enter orders manually, to put customers on recurring payments, pull reports, customizable fields, download/upload Quick Books file feature , multiple user with Admin control features and much more. A demo will be provided to your client for training by our technicians. SafePay Payment Gateway Solution Features: · Enables real-time online transaction processing · Fully CISP and PCI Certified · Free Quick Click Shopping Cart- Or connect with over 80 certified shopping carts · Recurring Billing- Bill your customers daily, weekly or monthly for as many payments as requires · Cardholder Authentication Card Programs: Verified by Visa, MasterCard SecureCode · Virtual Terminal- With a Level 3 intuitive user interface, you will be able to authorize, process and manage credit card transactions manually from any computer that has an internet connection. · API Integration- With API Integration solution your merchants will utilize the highest level of secure transaction infrastructure available. · Batch Upload Process- With batch upload processing you will be able to control and approve transactions manually prior to settlement. The batch processing system automatically allocates the batches in 1/16 bins and reduces overall processing time to a fraction of your competitors. · Electronic Check- Electronic Check is a payment solution that enables online and traditional merchants to accept and process electronic check payments directly from their Web site’s storefront or through the Virtual Terminal. By accepting electronic checks, you are able to expand the payment options available to your customers and thereby increase sales. Solution Option 1 Federated Payments and MSI Canada offers one of the best Payment Gateway programs in the industry known as Safepay. To simplify the shopping cart integration to our payment gateway, here are some free shopping carts we support: Free Supported Shopping Carts: OsCommerce.com, nopdesign.com, virtuemart.net, zencart.com, precisionweb.net Solution Option 2 Our technicians are equipped to handle any type of shopping cart in the marketplace. Custom built designs are accepted with additional security compliance testing. This means that the majority of shopping carts fall into compliance with our payment gateway solution after testing. Simple Process · When an
Re: rum0 acting as an Access point (belkin router) 8.0 R
On Mon, 2010-01-18 at 16:25 +0100, Samuel Martín Moro wrote:
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1:0xBC45AD1BD5 ssid
ReseauWIFI
Maybe your problem is that wepkey is malformatted in your command
If not, I didn't try to understand, but I also had troubles with the
position of SSID keyword.
(ifconfig arg error, might be your problem)
(btw: I also had problem with ssid containing spaced characters)
Later, I tried to set it up as an hostap, it seems to work well.
But when I try to connect from an other computer, I'm unable to to join the
network.
(running under 7.2, I compiled the kernel adding a define matching my
device, based on a similar (I hope so...) chipset)
good luck
Samuel Martín Moro
CamTrace
{EPITECH.} tek4
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess point
and tried various things. Under 7.0 I got it working with the following
command
ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE wepmode
on wepkey 0xf00baf00ba weptxkey 1 channel 1
I tried this but got a socket error Invalid argument.
Then I tried (from an example in the rum (4) manpage):ifconfig wlan
create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on
wepkey 0xf00baaf00baa weptxkey 1 channel 1
Perhaps you want this one:
ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I tried this in rc.conf:
ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I got this:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect adhoc (autoselect
adhoc)
status: no carrier
Why no carrier?
And I would expect more info on the interface like SSID and such.
--
Christoph
and got:
wlan0
ifconfig: SIOCSIFMEDIA (media): Device not configured
But suddenly the wlan0 device is there.
Can anybody fill me in?
--
Christoph
Wireless changed on 8, you have to define wlans in rc.conf then set the
network up onto the appropriate wlan entry;
example;
wlans_wpi0=wlan0
ifconfig_wlan0=WPA DHCP
Regards
Craig B
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rum0 acting as an Access point (belkin router) 8.0 R
Craig Butler schrieb:
On Mon, 2010-01-18 at 16:25 +0100, Samuel Martín Moro wrote:
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1:0xBC45AD1BD5 ssid
ReseauWIFI
Maybe your problem is that wepkey is malformatted in your command
If not, I didn't try to understand, but I also had troubles with the
position of SSID keyword.
(ifconfig arg error, might be your problem)
(btw: I also had problem with ssid containing spaced characters)
Later, I tried to set it up as an hostap, it seems to work well.
But when I try to connect from an other computer, I'm unable to to join the
network.
(running under 7.2, I compiled the kernel adding a define matching my
device, based on a similar (I hope so...) chipset)
good luck
Samuel Martín Moro
CamTrace
{EPITECH.} tek4
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess point
and tried various things. Under 7.0 I got it working with the following
command
ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE wepmode
on wepkey 0xf00baf00ba weptxkey 1 channel 1
I tried this but got a socket error Invalid argument.
Then I tried (from an example in the rum (4) manpage):ifconfig wlan
create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on
wepkey 0xf00baaf00baa weptxkey 1 channel 1
Perhaps you want this one:
ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I tried this in rc.conf:
ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I got this:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect adhoc (autoselect
adhoc)
status: no carrier
Why no carrier?
And I would expect more info on the interface like SSID and such.
--
Christoph
and got:
wlan0
ifconfig: SIOCSIFMEDIA (media): Device not configured
But suddenly the wlan0 device is there.
Can anybody fill me in?
--
Christoph
Wireless changed on 8, you have to define wlans in rc.conf then set the
That's why I'm asking :)
network up onto the appropriate wlan entry;
example;
wlans_wpi0=wlan0
ifconfig_wlan0=WPA DHCP
Regards
Craig B
Thanks Craig, and also Paul. It looks a bitt better now though still not
perfect. I don't see the SSID on the network yet
(I filled in a bogus wepkey for posting here, of course):
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap
ssid Aachen
wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid channel 10 (2457 Mhz 11g)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
protmode CTS bintval 0
Note, that I would like to build up an AP, not a peer to peer or WLAN
client.
--
Christoph
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rum0 acting as an Access point (belkin router) 8.0 R
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Craig Butler schrieb:
On Mon, 2010-01-18 at 16:25 +0100, Samuel Martín Moro wrote:
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1:0xBC45AD1BD5 ssid
ReseauWIFI
Maybe your problem is that wepkey is malformatted in your command
If not, I didn't try to understand, but I also had troubles with the
position of SSID keyword.
(ifconfig arg error, might be your problem)
(btw: I also had problem with ssid containing spaced characters)
Later, I tried to set it up as an hostap, it seems to work well.
But when I try to connect from an other computer, I'm unable to to join
the
network.
(running under 7.2, I compiled the kernel adding a define matching my
device, based on a similar (I hope so...) chipset)
good luck
Samuel Martín Moro
CamTrace
{EPITECH.} tek4
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies
k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess point
and tried various things. Under 7.0 I got it working with the
following
command
ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE
wepmode
on wepkey 0xf00baf00ba weptxkey 1 channel 1
I tried this but got a socket error Invalid argument.
Then I tried (from an example in the rum (4) manpage):ifconfig wlan
create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on
wepkey 0xf00baaf00baa weptxkey 1 channel 1
Perhaps you want this one:
ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I tried this in rc.conf:
ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I got this:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect adhoc
(autoselect
adhoc)
status: no carrier
Why no carrier?
And I would expect more info on the interface like SSID and such.
--
Christoph
and got:
wlan0
ifconfig: SIOCSIFMEDIA (media): Device not configured
But suddenly the wlan0 device is there.
Can anybody fill me in?
--
Christoph
Wireless changed on 8, you have to define wlans in rc.conf then set the
That's why I'm asking :)
network up onto the appropriate wlan entry;
example;
wlans_wpi0=wlan0
ifconfig_wlan0=WPA DHCP
Regards
Craig B
Thanks Craig, and also Paul. It looks a bitt better now though still not
perfect. I don't see the SSID on the network yet
(I filled in a bogus wepkey for posting here, of course):
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap
ssid Aachen
Still incorrect, remove wlan create wlandev rum0
wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid channel 10 (2457 Mhz 11g)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
protmode CTS bintval 0
Note, that I would like to build up an AP, not a peer to peer or WLAN
client.
BTW rum(4) is crap in hostap mode.
--
Paul B Mahol
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rum0 acting as an Access point (belkin router) 8.0 R
Paul B Mahol schrieb:
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Craig Butler schrieb:
On Mon, 2010-01-18 at 16:25 +0100, Samuel Martín Moro wrote:
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1:0xBC45AD1BD5 ssid
ReseauWIFI
Maybe your problem is that wepkey is malformatted in your command
If not, I didn't try to understand, but I also had troubles with the
position of SSID keyword.
(ifconfig arg error, might be your problem)
(btw: I also had problem with ssid containing spaced characters)
Later, I tried to set it up as an hostap, it seems to work well.
But when I try to connect from an other computer, I'm unable to to join
the
network.
(running under 7.2, I compiled the kernel adding a define matching my
device, based on a similar (I hope so...) chipset)
good luck
Samuel Martín Moro
CamTrace
{EPITECH.} tek4
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies
k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess point
and tried various things. Under 7.0 I got it working with the
following
command
ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE
wepmode
on wepkey 0xf00baf00ba weptxkey 1 channel 1
I tried this but got a socket error Invalid argument.
Then I tried (from an example in the rum (4) manpage):ifconfig wlan
create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on
wepkey 0xf00baaf00baa weptxkey 1 channel 1
Perhaps you want this one:
ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I tried this in rc.conf:
ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I got this:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect adhoc
(autoselect
adhoc)
status: no carrier
Why no carrier?
And I would expect more info on the interface like SSID and such.
--
Christoph
and got:
wlan0
ifconfig: SIOCSIFMEDIA (media): Device not configured
But suddenly the wlan0 device is there.
Can anybody fill me in?
--
Christoph
Wireless changed on 8, you have to define wlans in rc.conf then set the
That's why I'm asking :)
network up onto the appropriate wlan entry;
example;
wlans_wpi0=wlan0
ifconfig_wlan0=WPA DHCP
Regards
Craig B
Thanks Craig, and also Paul. It looks a bitt better now though still not
perfect. I don't see the SSID on the network yet
(I filled in a bogus wepkey for posting here, of course):
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap
ssid Aachen
Still incorrect, remove wlan create wlandev rum0
wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid channel 10 (2457 Mhz 11g)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
protmode CTS bintval 0
Note, that I would like to build up an AP, not a peer to peer or WLAN
client.
BTW rum(4) is crap in hostap mode.
This is what it looks like now:
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=10.0.0.1/24 wlanmode hostap ssid OFFICE wepmode on
wepkey 0xf00baaf00baaweptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid channel 11 (2462 Mhz 11g)
Re: rum0 acting as an Access point (belkin router) 8.0 R
On Mon, 2010-01-18 at 17:56 +0100, Christoph Kukulies wrote:
Paul B Mahol schrieb:
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Craig Butler schrieb:
On Mon, 2010-01-18 at 16:25 +0100, Samuel Martín Moro wrote:
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1:0xBC45AD1BD5 ssid
ReseauWIFI
Maybe your problem is that wepkey is malformatted in your command
If not, I didn't try to understand, but I also had troubles with the
position of SSID keyword.
(ifconfig arg error, might be your problem)
(btw: I also had problem with ssid containing spaced characters)
Later, I tried to set it up as an hostap, it seems to work well.
But when I try to connect from an other computer, I'm unable to to join
the
network.
(running under 7.2, I compiled the kernel adding a define matching my
device, based on a similar (I hope so...) chipset)
good luck
Samuel Martín Moro
CamTrace
{EPITECH.} tek4
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies
k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an wlan
acess point
and tried various things. Under 7.0 I got it working with the
following
command
ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE
wepmode
on wepkey 0xf00baf00ba weptxkey 1 channel 1
I tried this but got a socket error Invalid argument.
Then I tried (from an example in the rum (4) manpage):ifconfig wlan
create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode on
wepkey 0xf00baaf00baa weptxkey 1 channel 1
Perhaps you want this one:
ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I tried this in rc.conf:
ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I got this:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect adhoc
(autoselect
adhoc)
status: no carrier
Why no carrier?
And I would expect more info on the interface like SSID and such.
--
Christoph
and got:
wlan0
ifconfig: SIOCSIFMEDIA (media): Device not configured
But suddenly the wlan0 device is there.
Can anybody fill me in?
--
Christoph
Wireless changed on 8, you have to define wlans in rc.conf then set the
That's why I'm asking :)
network up onto the appropriate wlan entry;
example;
wlans_wpi0=wlan0
ifconfig_wlan0=WPA DHCP
Regards
Craig B
Thanks Craig, and also Paul. It looks a bitt better now though still not
perfect. I don't see the SSID on the network yet
(I filled in a bogus wepkey for posting here, of course):
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or
auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap
ssid Aachen
Still incorrect, remove wlan create wlandev rum0
wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid channel 10 (2457 Mhz 11g)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid 60
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
protmode CTS bintval 0
Note, that I would like to build up an AP, not a peer to peer or WLAN
client.
BTW rum(4) is crap in hostap mode.
This is what it looks like now:
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=10.0.0.1/24 wlanmode hostap ssid OFFICE wepmode on
wepkey 0xf00baaf00baaweptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
Re: rum0 acting as an Access point (belkin router) 8.0 R
Craig Butler schrieb: ifconfig_wlan0=10.0.0.1/24 wlanmode hostap ssid OFFICE wepmode on wepkey 0xf00baaf00baaweptxkey 1 channel 1 erm missing inet ??? missing space between the wepkey and weptxkey ?? This only was a cut/paste error in the email text, not actually in the rc.conf. But I noticed that I can piecewise add parameters to the wlan0 interface: ifconfig wlan0 inet 10.0.0.1/24 adds the IP ifconfig ssid OFFICE adds the ssid Only passing all parametrs in one line I fail to manage. -- Christoph ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Any curses gurus on this list? [Was:: {Re: curses init in one line?}]
On Sun, Jan 17, 2010 at 07:34:29PM -0800, Gary Kline wrote: I'm going round, round and round. chasing my tail trying to piece to gether a simple [ha!] test program that uses curses. Anybody out there who know how to fix an output cursor move()ment? Please write me off line. thnks, gary -- Gary Kline kl...@thought.org http://www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org The 7.79a release of Jottings: http://jottings.thought.org/index.php ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
immense delayed write to file system (ZFS and UFS2), performance issues
I realise a strange behaviour of several FreeBSD 8.0-STABLE/amd64 boxes. All boxes have the most recent STABLE. One box is a UP system, two others SMP boxes, one with a Q6600 4-core, another XEON with 2x 4-cores (Dell Poweredge III). Symptome: All boxes have ZFS and UFS2 filesystems. Since two weeks or so, sometimes the I/O performance drops massively when doing 'svn update', 'make world' or even 'make kernel'. It doesn't matter what memory and how many cpu the box has, it get stuck for several seconds and freezing. On the UP box, this is sometimes for 10 - 20 seconds. A very interesting phenomenon is the massively delayed file writing on ZFS filesystems I realise. Editing a file in 'vi' running on one XTerm and having in another Xterminal my shell for compiling this file, it takes sometimes up to 20 seconds to get the file updated after it has been written. It's like having an old, slow NFS connection with long cache delays. These massively delayed file transactions are not necessarely under heavy load, sometimes they occur in a relaxed situation. They seem to occur much more often on the UP box than on the SMP boxes, but this strange phenomenon also occur on the Dell Poweredge II, which has 16GB RAM and summa summarum 16 cores. This phenomenon does occur on ZFS- and UFS2 filesystems as well. It is hardly reproducable. Is there any known issue? Ragrds, Oliver ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: curses init in one line?
On Sun, 17 Jan 2010 19:34:29 -0800, Gary Kline kl...@thought.org wrote:
this is going to sound a bit off the wall, and it may have only worked
in FBSD [if I wasn't imagining it], but is there a way to get into
curses/ncurses mode in one short line? it has been years but I think
somebody sent me the magic code, for either a shell scrippt or a C
program.
It's quite easy, let me demonstrate it with this
example program:
/* curses_attributes_test.c (-lncurses required) */
#include curses.h
int main(void)
{
initscr();
cbreak();
noecho();
nonl();
intrflush(stdscr, FALSE);
keypad(stdscr, TRUE);
start_color();
attrset(A_NORMAL);
printw(Normal display (no highlight)\n);
printw(\n);
attrset(A_STANDOUT);
printw(Best highlighting mode of the terminal.\n);
printw(\n);
attrset(A_UNDERLINE);
printw(Underlining\n);
printw(\n);
attrset(A_REVERSE);
printw(Reverse video\n);
printw(\n);
attrset(A_BLINK);
printw(Blinking\n);
printw(\n);
attrset(A_DIM);
printw(Half bright\n);
printw(\n);
attrset(A_BOLD);
printw(Extra bright or bold\n);
printw(\n);
refresh();
return 0;
}
The initsrc() funtion is the key.
I do not have it anywhere in my C files.
But in the manpage. :-)
--
Polytropon
Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: immense delayed write to file system (ZFS and UFS2), performance issues
O. Hartmann wrote: I realise a strange behaviour of several FreeBSD 8.0-STABLE/amd64 boxes. All boxes have the most recent STABLE. One box is a UP system, two others SMP boxes, one with a Q6600 4-core, another XEON with 2x 4-cores (Dell Poweredge III). Symptome: All boxes have ZFS and UFS2 filesystems. Since two weeks or so, sometimes the I/O performance drops massively when doing 'svn update', 'make world' or even 'make kernel'. It doesn't matter what memory and how many cpu the box has, it get stuck for several seconds and freezing. On the UP box, this is sometimes for 10 - 20 seconds. A very interesting phenomenon is the massively delayed file writing on ZFS filesystems I realise. Editing a file in 'vi' running on one XTerm and having in another Xterminal my shell for compiling this file, it takes sometimes up to 20 seconds to get the file updated after it has been written. It's like having an old, slow NFS connection with long cache delays. These massively delayed file transactions are not necessarely under heavy load, sometimes they occur in a relaxed situation. They seem to occur much more often on the UP box than on the SMP boxes, but this strange phenomenon also occur on the Dell Poweredge II, which has 16GB RAM and summa summarum 16 cores. This phenomenon does occur on ZFS- and UFS2 filesystems as well. It is hardly reproducable. Is there any known issue? Ragrds, Oliver The disks involved don't happen to be Western Digital Green Power disks, do they? The Intelli-Park function in these disks are wrecking havoc with I/O in Linux-land at least, causing massive stalls and iowait through the roof during the 25-30 seconds it takes for the heads to unload after parking. I have two of these disks sitting on my desk now collecting dust... /Morgan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: rum0 acting as an Access point (belkin router) 8.0 R
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Paul B Mahol schrieb:
On 1/18/10, Christoph Kukulies k...@kukulies.org wrote:
Craig Butler schrieb:
On Mon, 2010-01-18 at 16:25 +0100, Samuel Martin Moro wrote:
in my rc.conf:
ifconfig_rum0=DHCP wepmode on weptxkey 1 wepkey 1:0xBC45AD1BD5 ssid
ReseauWIFI
Maybe your problem is that wepkey is malformatted in your command
If not, I didn't try to understand, but I also had troubles with the
position of SSID keyword.
(ifconfig arg error, might be your problem)
(btw: I also had problem with ssid containing spaced characters)
Later, I tried to set it up as an hostap, it seems to work well.
But when I try to connect from an other computer, I'm unable to to join
the
network.
(running under 7.2, I compiled the kernel adding a define matching my
device, based on a similar (I hope so...) chipset)
good luck
Samuel Martin Moro
CamTrace
{EPITECH.} tek4
Nobody wants to say how this works.
Maybe nobody knows ...
Xorg.conf(5)
On Mon, Jan 18, 2010 at 3:43 PM, Christoph Kukulies
k...@kukulies.orgwrote:
Paul B Mahol schrieb:
On 1/15/10, Christoph Kukulies k...@kukulies.org wrote:
I'm not sure wether syntax has changed but I wanted to cretae an
wlan
acess point
and tried various things. Under 7.0 I got it working with the
following
command
ifconfig rum0 inet 10.0.0.1/24 mediaopt hostap ssid CITYOFFICE
wepmode
on wepkey 0xf00baf00ba weptxkey 1 channel 1
I tried this but got a socket error Invalid argument.
Then I tried (from an example in the rum (4) manpage):ifconfig wlan
create wlandev rum0 10.0.0.1/24 mediaopt hostap CITYOFFICE wepmode
on
wepkey 0xf00baaf00baa weptxkey 1 channel 1
Perhaps you want this one:
ifconfig wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I tried this in rc.conf:
ifconfig_rum0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap
ssid
CITYOFFICE wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
I got this:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect adhoc
(autoselect
adhoc)
status: no carrier
Why no carrier?
And I would expect more info on the interface like SSID and such.
--
Christoph
and got:
wlan0
ifconfig: SIOCSIFMEDIA (media): Device not configured
But suddenly the wlan0 device is there.
Can anybody fill me in?
--
Christoph
Wireless changed on 8, you have to define wlans in rc.conf then set the
That's why I'm asking :)
network up onto the appropriate wlan entry;
example;
wlans_wpi0=wlan0
ifconfig_wlan0=WPA DHCP
Regards
Craig B
Thanks Craig, and also Paul. It looks a bitt better now though still not
perfect. I don't see the SSID on the network yet
(I filled in a bogus wepkey for posting here, of course):
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or
auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=wlan create wlandev rum0 10.0.0.1/24 wlanmode hostap
ssid Aachen
Still incorrect, remove wlan create wlandev rum0
wepmode on wepkey 0xf00baaf00baa weptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu
1500
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid channel 10 (2457 Mhz 11g)
country US authmode OPEN privacy OFF txpower 0 bmiss 7 scanvalid
60
bgscan bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 5
protmode CTS bintval 0
Note, that I would like to build up an AP, not a peer to peer or WLAN
client.
BTW rum(4) is crap in hostap mode.
This is what it looks like now:
Argh sorry, you need to use:
create_args_wlan0=wlanmode hostap
And put remaining stuf into ifconfig line.
rc.conf:
wlans_rum0=wlan0
network_interfaces=lo0 rl0 wlan0 # List of network interfaces (or auto).
ifconfig_lo0=inet 127.0.0.1 # default loopback device configuration.
ifconfig_rl0=inet 172.27.4.219 netmask 255.255.248.0
ifconfig_wlan0=10.0.0.1/24 wlanmode hostap ssid OFFICE wepmode on
wepkey 0xf00baaf00baaweptxkey 1 channel 1
defaultrouter=172.27.2.116
ifconfig:
rum0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 2290
ether 00:11:50:cb:52:10
media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
status: associated
wlan0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST metric 0 mtu 1500
Re: library problems with sound-juicer
On Fri, 15 Jan 2010, Marco Beishuizen wrote: Hi, When trying to portupgrade sound-juicer I get: ... /usr/bin/ld: warning: libssl.so.5, needed by /usr/local/lib/libneon.so, may conflict with libssl.so.7 /usr/lib/libkrb5.so: undefined reference to `hx509_certs_init' /usr/lib/libkrb5.so: undefined reference to `hx509_cert_get_serialnumber' /usr/lib/libkrb5.so: undefined reference to `hx509_cert_find_subjectAltName_otherName' /usr/lib/libkrb5.so: undefined reference to `hx509_certs_find' /usr/lib/libkrb5.so: undefined reference to `hx509_verify_attach_anchors' /usr/lib/libkrb5.so: undefined reference to `hx509_query_alloc' /usr/lib/libkrb5.so: undefined reference to `hx509_get_error_string' /usr/lib/libkrb5.so: undefined reference to `hx509_cms_unenvelope' /usr/lib/libkrb5.so: undefined reference to `hx509_lock_add_password' /usr/lib/libkrb5.so: undefined reference to `hx509_revoke_init' /usr/lib/libkrb5.so: undefined reference to `hx509_verify_hostname' /usr/lib/libkrb5.so: undefined reference to `hx509_cms_unwrap_ContentInfo' /usr/lib/libkrb5.so: undefined reference to `hx509_prompt_hidden' /usr/lib/libkrb5.so: undefined reference to `hx509_name_free' /usr/lib/libkrb5.so: undefined reference to `hx509_cert_check_eku' /usr/lib/libkrb5.so: undefined reference to `hx509_name_binary' /usr/lib/libkrb5.so: undefined reference to `hx509_certs_append' /usr/lib/libkrb5.so: undefined reference to `hx509_verify_destroy_ctx' /usr/lib/libkrb5.so: undefined reference to `hx509_name_to_Name' /usr/lib/libkrb5.so: undefined reference to `hx509_cms_wrap_ContentInfo' /usr/lib/libkrb5.so: undefined reference to `hx509_cert_get_issuer' /usr/lib/libkrb5.so: undefined reference to `hx509_free_octet_string_list' /usr/lib/libkrb5.so: undefined reference to `hx509_certs_iter' /usr/lib/libkrb5.so: undefined reference to `hx509_revoke_free' /usr/lib/libkrb5.so: undefined reference to `hx509_cert_get_subject' /usr/lib/libkrb5.so: undefined reference to `hx509_cert_free' /usr/lib/libkrb5.so: undefined reference to `hx509_verify_attach_revoke' /usr/lib/libkrb5.so: undefined reference to `hx509_get_one_cert' /usr/lib/libkrb5.so: undefined reference to `hx509_verify_init_ctx' /usr/lib/libkrb5.so: undefined reference to `hx509_revoke_add_crl' /usr/lib/libkrb5.so: undefined reference to `hx509_context_free' /usr/lib/libkrb5.so: undefined reference to `hx509_cms_create_signed_1' /usr/lib/libkrb5.so: undefined reference to `hx509_name_is_null_p' /usr/lib/libkrb5.so: undefined reference to `hx509_cms_verify_signed' /usr/lib/libkrb5.so: undefined reference to `hx509_lock_free' /usr/lib/libkrb5.so: undefined reference to `hx509_context_set_missing_revoke' /usr/lib/libkrb5.so: undefined reference to `hx509_query_match_option' /usr/lib/libkrb5.so: undefined reference to `hx509_query_free' /usr/lib/libkrb5.so: undefined reference to `hx509_lock_init' /usr/lib/libkrb5.so: undefined reference to `hx509_verify_set_proxy_certificate' /usr/lib/libkrb5.so: undefined reference to `hx509_certs_free' /usr/lib/libkrb5.so: undefined reference to `hx509_context_init' /usr/lib/libkrb5.so: undefined reference to `hx509_lock_set_prompter' /usr/lib/libkrb5.so: undefined reference to `hx509_crypto_available' gmake[2]: *** [sound-juicer] Error 1 gmake[2]: Leaving directory `/usr/ports/audio/sound-juicer/work/sound-juicer-2.28.1/src' ... After doing a portupgrade -Rrf sound-juicer, this problem seems to have disappeared. Marco -- Flattery will get you everywhere. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Newbie gmirror questions
On Sunday 17 January 2010, Matthew Seaman wrote: However, one of the really amazingly brilliant things about geom is that just about any disk / storage related thing can be a geom provider, and geom constructs will nest very happily. Here's a howto for setting up gmirror across a pair of slices: http://people.freebsd.org/~rse/mirror/ That's a very interesting article. Since I'll be able to configure the mirror on the new drives before installing any software my approach can be a bit simpler. In the example he's using a single partition for the whole disk but reduces the size if the partition by one block so that the mirror's meta data doesn't get misinterpreted as whole disk meta data. Since I anticipate using only the first 2 partitions for a couple of mirrors and using the rest of the disk as plain partitions then I don't think I need to do this but might it still be a good idea to reduce the last partition by one block anyway in case my usage changes in the future? -- Mike Clarke ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
/etc/hosts.deniedssh
Examples from hosts.deniedssh I seem to be on the receiving end of a concerted series of unsuccessful break in attacks on one of our systems. One small part of the attack has resulted in over 2000 entries in our hosts.deniedssh file in less than 1 hour. I would be interested in any comments on the small example shown below and any advice. Thanks in advance David r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: /etc/hosts.deniedssh
On Mon, Jan 18, 2010 at 4:39 PM, David Southwell da...@vizion2000.netwrote: Examples from hosts.deniedssh I seem to be on the receiving end of a concerted series of unsuccessful break in attacks on one of our systems. One small part of the attack has resulted in over 2000 entries in our hosts.deniedssh file in less than 1 hour. I would be interested in any comments on the small example shown below and any advice. Thanks in advance David r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy mail.munisanmiguel.gob.pe port-83-236-241-198.static.qsc.de pd95b50ce.dip0.t-ipconnect.de v32641.1blu.de dubovik.net r200-40-132-245.static.adinet.com.uy Looks like your conf could use some love. Why are you resolving ip's? Thresholds can be lowered. Are you syncing with remote list? -- Adam Vande More ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: /etc/hosts.deniedssh
On Tuesday 19 January 2010 00:39, David Southwell wrote: Examples from hosts.deniedssh I seem to be on the receiving end of a concerted series of unsuccessful break in attacks on one of our systems. One small part of the attack has resulted in over 2000 entries in our hosts.deniedssh file in less than 1 hour. I would be interested in any comments on the small example shown below and any advice. Thanks in advance David snip 2k entries are too much indeed. are you running ssh on port 22? if yes, (and your users are ok with it) you can change it to another port. or maybe, temporary disable ssh login and use cron to enable it again in some time in the future. -- Save the whales. Club a seal instead. signature.asc Description: This is a digitally signed message part.
Re: curses init in one line?
On Mon, Jan 18, 2010 at 09:21:36PM +0100, Polytropon wrote:
On Sun, 17 Jan 2010 19:34:29 -0800, Gary Kline kl...@thought.org wrote:
this is going to sound a bit off the wall, and it may have only worked
in FBSD [if I wasn't imagining it], but is there a way to get into
curses/ncurses mode in one short line? it has been years but I think
somebody sent me the magic code, for either a shell scrippt or a C
program.
It's quite easy, let me demonstrate it with this
example program:
Whoa, cool, man, thanks. I'll print this out to save. a number wrote
off list and I may pick one or two and see if they have a clue why my
output isn't jibing with what I want.
gary
ps: re Subject line, I remember it let you use /bin/sh without hittin
enter or cr. there's no easy way of doing that in C!
/* curses_attributes_test.c (-lncurses required) */
#include curses.h
int main(void)
{
initscr();
cbreak();
noecho();
nonl();
intrflush(stdscr, FALSE);
keypad(stdscr, TRUE);
start_color();
attrset(A_NORMAL);
printw(Normal display (no highlight)\n);
printw(\n);
attrset(A_STANDOUT);
printw(Best highlighting mode of the terminal.\n);
printw(\n);
attrset(A_UNDERLINE);
printw(Underlining\n);
printw(\n);
attrset(A_REVERSE);
printw(Reverse video\n);
printw(\n);
attrset(A_BLINK);
printw(Blinking\n);
printw(\n);
attrset(A_DIM);
printw(Half bright\n);
printw(\n);
attrset(A_BOLD);
printw(Extra bright or bold\n);
printw(\n);
refresh();
return 0;
}
The initsrc() funtion is the key.
I do not have it anywhere in my C files.
But in the manpage. :-)
--
Polytropon
Magdeburg, Germany
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...
--
Gary Kline kl...@thought.org http://www.thought.org Public Service Unix
http://jottings.thought.org http://transfinite.thought.org
The 7.79a release of Jottings: http://jottings.thought.org/index.php
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: immense delayed write to file system (ZFS and UFS2), performance issues
On Tue, 19 Jan 2010, Morgan Wesström wrote: The disks involved don't happen to be Western Digital Green Power disks, do they? The Intelli-Park function in these disks are wrecking havoc with I/O in Linux-land at least, causing massive stalls and iowait through the roof during the 25-30 seconds it takes for the heads to unload after parking. I have two of these disks sitting on my desk now collecting dust... There's this.. http://www.silentpcreview.com/Terabyte_Drive_Fix and you can get the tool at.. http://home.arcor.de/ghostadmin/wdidle3_1_00.zip I am planning to try this out tonight.. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au The nice thing about standards is that there are so many of them to choose from. -- Andrew Tanenbaum GPG Fingerprint - 5596 B766 97C0 0E94 4347 295E E593 DC20 7B3F CE8C signature.asc Description: This is a digitally signed message part.
ffmpeg port build failing
Hello I'm trying to install gimp from ports but one of its dependencies is failing, ffmpeg. This is the error its failing on: libavdevice/v412.c:41:23: erro: asm/types.h: No such file or directory In file included from libavdevice/v412.c:42: /usr/local/include/linux/videodev2.h:430: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:837: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:930: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:1478: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:1600: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:1651: warning: declararion does not declare anything gmake: ***[libavdevice/v412.o] Error 1 (I think that's all of the relevant part of the output.) I wondered if anyone knows what could be wrong here, and how I can get it to build? Jamie ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ffmpeg port build failing
On Tue, Jan 19, 2010 at 02:51:15AM +, Jamie Griffin wrote: Hello I'm trying to install gimp from ports but one of its dependencies is failing, ffmpeg. This is the error its failing on: libavdevice/v412.c:41:23: erro: asm/types.h: No such file or directory In file included from libavdevice/v412.c:42: /usr/local/include/linux/videodev2.h:430: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:837: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:930: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:1478: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:1600: warning: declararion does not declare anything /usr/local/include/linux/videodev2.h:1651: warning: declararion does not declare anything gmake: ***[libavdevice/v412.o] Error 1 (I think that's all of the relevant part of the output.) I wondered if anyone knows what could be wrong here, and how I can get it to build? Jamie Problem here is in multimedia/v4l_compat port, which was recently updated to install include/linux/videodev2.h. You could try uninstalling it or moving include/linux/videodev2.h away when you are building ffmpeg. HTH, Yuri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Serious problems updating Current after switching to libxul.
Hello,
I'm running Freebsd 8.0-Stable #9 Dec 17/09 on amd64. I'm running gnome, and at
the time i started my update i was at Gnome 2.26
I went through UPDATING and tried to switch from firefox 2 which is marked
ignore to libxul by changing WITH_GECKO=libxul removed firefox3 and installed
firefox35
I used UPDATING to try and sort out libxul, but it seems i have some cyclic
dependencies.
I use portmaster (i did try to rebuild things for portupgrade and try, but it
had bigger problems and i couldn't even update the index.) I keep updating my
ports tree (cvsup) i used portsnap, and it seems that was when my problems
started, i rm -rf /usr/ports/* and cvsupped the entire thing back at one point.
I got an error which seems to have started the whole ugly affair with
/usr/ports/Mk/bsd.gecko.mk causing post patch issues, the main problem seemed
to be e2fsprogs-libuuid which i was unable to rebuild due to it wanting a
bsd.gecko.mk patch which from what i've read is now removed with firefox2, i
deleted stuff till i got around that for now... but...
at present my key problem is a cyclic dependency when i try and rebuilt pretty
much anything, with libxul as the main issue.
glib20 =gt; libxul =gt;glib20 =gt; libxul =gt;glib20 =gt; libxul
=gt;glib20 =gt; libxul =gt;glib20 =gt; libxul =gt;glib20
I have tried installing the package for both. i've tried pkg_deleting both then
installing the port, or using portmaster, i've tried portmaster
--check-depends, i've tried portmaster -e to remove them and try and re-install
them. I've removed about 1/2 my system and now have even more problems. (i
removed gettext and now portmaster complains about missing libintl.so.8 not
found.
at best i get a much larger cyclic loop with:
glib20 =gt; libtool22 =gt; libiconv =gt; gettetxt =gt; atk =gt; libgmp4
=gt; farsight =gt; gdm =gt; libxul =gt; glib20
or some other combination of the cycle.
Can anyone help me get my system back up and running?
make.conf looks like this:
WITH_MYSQL_VER=51
APACHE_VERSION=22
OVERRIDE_LINUX_BASE_PORT=f8
WWWDIR = /web/phpmyadmin
WITH_CUPS=yes
CUPS_OVERWRITE_BASE=true
#NO_LPR=true
USE_GECKO=libxul
# Begin portconf settings
# Do not touch these lines
.if !empty(.CURDIR:M/usr/ports*) amp;amp; exists(/usr/local/libexec/portconf)
_PORTCONF!=/usr/local/libexec/portconf
.for i in ${_PORTCONF:S/|/ /g}
${i:S/%/ /g}
.endfor
.endif
# End portconf settings
# added by use.perl 2009-09-19 16:22:20
PERL_VERSION=5.10.1
thanks
ken
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ffmpeg port build failing
Problem here is in multimedia/v4l_compat port, which was recently updated to install include/linux/videodev2.h. You could try uninstalling it or moving include/linux/videodev2.h away when you are building ffmpeg. tried both those options, neither one works unfortunately. hmmm. Thanks for trying though. Jamie ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ffmpeg port build failing
On Tue, Jan 19, 2010 at 03:45:48AM +, Jamie Griffin wrote: Problem here is in multimedia/v4l_compat port, which was recently updated to install include/linux/videodev2.h. You could try uninstalling it or moving include/linux/videodev2.h away when you are building ffmpeg. tried both those options, neither one works unfortunately. hmmm. Helped here. I hope you did run `make clean` after removing v4l_compat port? Thanks for trying though. Jamie Yuri ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: ffmpeg port build failing
I hope you did run `make clean` after removing v4l_compat port? Hi Yuri, I had not done `make clean`, but doing so did make it install ok. Thanks for you help. Jamie ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
can't build pidgin...
when I do a make install clean in net-im/pidgin I constantly get rejects about the datestamp being wrong and the file is not retrieved. any help will be greatly appreciated. tia... . -- Gary Kline kl...@thought.org http://www.thought.org Public Service Unix http://jottings.thought.org http://transfinite.thought.org The 7.79a release of Jottings: http://jottings.thought.org/index.php ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: Dislike the way port conflicts are handled now
On Monday 18 January 2010 17:48:37 b. f. wrote: Argh! Stop! I wish that people who felt the need to add to this thread would read the prior posts beforehand, and consider their comments before posting. I don't know why you assume people didn't. I read the whole thread. I saw people who had individual special requirements, but I didn't see anything that suggested I was wrong in assuming the most common use case, by far, to be downloading and building a port in order to install it. Assuming that *is* indeed the commonest use case, this change makes life a little more difficult for almost everyone in order to save possibly as much as tens of minutes of wasted time for a few people. Worse than that, the new behaviour either increases downtime (by requiring that the conflicting port be removed before even starting to download the replacement) or requires, as you pointed out, setting a risky option which if accidentally misused, could break the whole system. I still think it's an ill-considered change for the worse to make the new behaviour the default. Jonathan ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
Re: /etc/hosts.deniedssh
David Southwell wrote: Examples from hosts.deniedssh I seem to be on the receiving end of a concerted series of unsuccessful break in attacks on one of our systems. One small part of the attack has resulted in over 2000 entries in our hosts.deniedssh file in less than 1 hour. I would be interested in any comments on the small example shown below and any advice. 1. see thread from last week denying spam hosts ssh access 2. don't resolve ips 3. do a sort, you'll see that many come from the same network, possibly the same node with a new IP, block entire ranges, blocking individual ip's is futile. 4. consider blocking in your firewall 5. don't worry, unsuccesfull attacks are - well, unsuccesfull BR, Erik -- Erik Nørgaard Ph: +34.666334818/+34.915211157 http://www.locolomo.org ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
