Re: amd64 + RAID freezing system
On 12/22/05, Georg Auernhammer [EMAIL PROTECTED] wrote: Hello! i have an amd64 with Sata 80Gig Hardisk and extra RAID: [...] newfs and mounting ar0 works. but as sonn as i am trying to write data on the RAID, the system freezes. i had some problems writing the label to ar0s1d but after some reboots he managed to write the label on ar0. only thing is, i cant write data... Any suggestions? I just dealt with a situation that sounds similar. I have an x86 box with a Promise SATA card with 2 drives in a RAID1 that had been running fairly well for several months. Then it suddenly froze up (no reboot, nothing written to the console). After a power cycle the system froze during fsck. In single user mode I was able to get it mounted readonly without fsck, and could read some files, but before too long it would freeze again. I pulled one of the drives and rebooted. Same behavior. Then I pulled that drive and put the other one back. Fsck completed and it now works fine (aside from no mirroring going on anymore of course). Short version: though it sure seems like one of the drives had gone bad, the Promise card didn't notice. It may say the array is READY you shouldn't trust it. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: amd64 + RAID freezing system
i have an amd64 with Sata 80Gig Hardisk and extra RAID: [...] newfs and mounting ar0 works. but as sonn as i am trying to write data on the RAID, the system freezes. i had some problems writing the label to ar0s1d but after some reboots he managed to write the label on ar0. only thing is, i cant write data... Any suggestions? Short version: though it sure seems like one of the drives had gone bad, the Promise card didn't notice. It may say the array is READY you shouldn't trust it. But it shouldnt freeze. Its a RAID 10, or do you think there are more than 1 disks broken? -- Georg Auernhammer AltBenutzerberater RUS, Admin Institut für Geophysik ehemal. FTP-Admin, Mirror, WXP-Pool [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: amd64 + RAID freezing system
On 12/23/05, Georg Auernhammer [EMAIL PROTECTED] But it shouldnt freeze. Its a RAID 10, or do you think there are more than 1 disks broken? I know it shouldn't freeze, but in my case I had a bad drive and as far as the Promise controller was concerned, the drive was good. Through trial and error I figured out which drive it was (not too hard in my case since there were only 2 drives) and replaced it. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
amd64 + RAID freezing system
Hello! i have an amd64 with Sata 80Gig Hardisk and extra RAID: ad4: 76319MB Seagate ST380817AS 3.42 at ata2-master SATA150 ad8: 238475MB Seagate ST3250823AS 3.03 at ata4-master SATA150 ad10: 238475MB Seagate ST3250823AS 3.03 at ata5-master SATA150 ad12: 238475MB Seagate ST3250823AS 3.03 at ata6-master SATA150 ad14: 238475MB Seagate ST3250823AS 3.03 at ata7-master SATA150 ar0: 476837MB Promise Fasttrak RAID0+1 (stripe 64 KB) status: READY ar0: disk0 READY (master) using ad14 at ata7-master ar0: disk1 READY (master) using ad10 at ata5-master ar0: disk2 READY (mirror) using ad8 at ata4-master ar0: disk3 READY (mirror) using ad12 at ata6-master newfs and mounting ar0 works. but as sonn as i am trying to write data on the RAID, the system freezes. i had some problems writing the label to ar0s1d but after some reboots he managed to write the label on ar0. only thing is, i cant write data... Any suggestions? -- Georg Auernhammer http://www.isnochys.de ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]