Re: DDDEFs and TARGET Datasets missing
I agree, there's a couple of documents, normally, it's been a while since I ordered a CBPDO and that was for the OS, IIRC there's a RIMFILE, but the doc should point you to an SMPREL FILE hlq.fmidid.F1 F1 F2 that has JCL to defined the SMP DDDEF's or an IEBCOPY job that copied that RELFILE to a PDS to complete the install. Carmen Vitullo - Original Message - From: "Allan Staller" To: IBM-MAIN@LISTSERV.UA.EDU Sent: Friday, June 12, 2020 7:16:11 AM Subject: Re: DDDEFs and TARGET Datasets missing There should be some downloadable doc along with the order. I presume this is a cbpdo order, and not a Serverpac order. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Friday, June 12, 2020 6:24 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: DDDEFs and TARGET Datasets missing [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] So I have another "rookie" mistake here. I am ordering Db2 Query Monitor z/OS v3. I ordered and ran the GIMSMP - Download, Unpack, Receive job which completed successfully (CC 0). Now I am trying to run the Apply Check and am failing on missing DDDEFs and Datasets. Where would I get the jcl to define the DDDEFs and datasets needed? thanks Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
yes this is a CBPDO order. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
There should be some downloadable doc along with the order. I presume this is a cbpdo order, and not a Serverpac order. -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Friday, June 12, 2020 6:24 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: DDDEFs and TARGET Datasets missing [CAUTION: This Email is from outside the Organization. Unless you trust the sender, Don’t click links or open attachments as it may be a Phishing email, which can steal your Information and compromise your Computer.] So I have another "rookie" mistake here. I am ordering Db2 Query Monitor z/OS v3. I ordered and ran the GIMSMP - Download, Unpack, Receive job which completed successfully (CC 0). Now I am trying to run the Apply Check and am failing on missing DDDEFs and Datasets. Where would I get the jcl to define the DDDEFs and datasets needed? thanks Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN ::DISCLAIMER:: The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
That’s why you either copy them out of the relfiles, or pull them up in VIEW mode, make your temporary customizations, run them, and then cancel out. There is usually an allocation job, a DDDEF job, a ZFS allocation & mkdir job (if prod has zfs), apply and accept jobs in there. The program directory I referred you to, documents all of this, including which relfile to go look into to find them _ Dave Jousma AVP | Manager, Systems Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Friday, June 12, 2020 7:54 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: DDDEFs and TARGET Datasets missing **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** thank you for the help! I found the job members in one of the RELFILES and can run the CQMALLOC CQMALLO2 CQMDDDEF CQMDDDEF2 easy enough and then hopefully run a clean apply check. But I feel I am missing something here. I cant run and apply until I run those jobs but the apply will populate those jobs in those PDSs. It's like the chicken and the egg. Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
thank you for the help! I found the job members in one of the RELFILES and can run the CQMALLOC CQMALLO2 CQMDDDEF CQMDDDEF2 easy enough and then hopefully run a clean apply check. But I feel I am missing something here. I cant run and apply until I run those jobs but the apply will populate those jobs in those PDSs. It's like the chicken and the egg. Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
What I do is VIEW these RELFILES and modify the JCL, run them, then cancel out (Ie don’t update the data). _ Dave Jousma AVP | Manager, Systems Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Friday, June 12, 2020 7:33 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: DDDEFs and TARGET Datasets missing **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** In my receive job I can see the various jcl members I would need to run CQMALLOC, CQMDDDEF, etc. These would be put in a SCQMSAMP pds. But I dont have those PDSs defined yet. Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
In your shopz order there is a publications link. In there you will find the Program Directory. In it, it documents the steps to complete the SMPE work, along with the sample jobs. _ Dave Jousma AVP | Manager, Systems Engineering Fifth Third Bank | 1830 East Paris Ave, SE | MD RSCB2H | Grand Rapids, MI 49546 616.653.8429 | fax: 616.653.2717 -Original Message- From: IBM Mainframe Discussion List On Behalf Of Bill Giannelli Sent: Friday, June 12, 2020 7:24 AM To: IBM-MAIN@LISTSERV.UA.EDU Subject: DDDEFs and TARGET Datasets missing **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** So I have another "rookie" mistake here. I am ordering Db2 Query Monitor z/OS v3. I ordered and ran the GIMSMP - Download, Unpack, Receive job which completed successfully (CC 0). Now I am trying to run the Apply Check and am failing on missing DDDEFs and Datasets. Where would I get the jcl to define the DDDEFs and datasets needed? thanks Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN **CAUTION EXTERNAL EMAIL** **DO NOT open attachments or click on links from unknown senders or unexpected emails** This e-mail transmission contains information that is confidential and may be privileged. It is intended only for the addressee(s) named above. If you receive this e-mail in error, please do not read, copy or disseminate it in any manner. If you are not the intended recipient, any disclosure, copying, distribution or use of the contents of this information is prohibited. Please reply to the message immediately by informing the sender that the message was misdirected. After replying, please erase it from your computer system. Your assistance in correcting this error is appreciated. -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
In my receive job I can see the various jcl members I would need to run CQMALLOC, CQMDDDEF, etc. These would be put in a SCQMSAMP pds. But I dont have those PDSs defined yet. Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Re: DDDEFs and TARGET Datasets missing
Those jobs are usually in one of the SMP/e unloaded relfiles. The install documentation should have that information. Mark Jacobs Sent from ProtonMail, Swiss-based encrypted email. GPG Public Key - https://api.protonmail.ch/pks/lookup?op=get&search=markjac...@protonmail.com ‐‐‐ Original Message ‐‐‐ On Friday, June 12, 2020 7:24 AM, Bill Giannelli wrote: > So I have another "rookie" mistake here. > I am ordering Db2 Query Monitor z/OS v3. > I ordered and ran the GIMSMP - Download, Unpack, Receive job which completed > successfully (CC 0). > Now I am trying to run the Apply Check and am failing on missing DDDEFs and > Datasets. > Where would I get the jcl to define the DDDEFs and datasets needed? > thanks > Bill > > -- > > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
DDDEFs and TARGET Datasets missing
So I have another "rookie" mistake here. I am ordering Db2 Query Monitor z/OS v3. I ordered and ran the GIMSMP - Download, Unpack, Receive job which completed successfully (CC 0). Now I am trying to run the Apply Check and am failing on missing DDDEFs and Datasets. Where would I get the jcl to define the DDDEFs and datasets needed? thanks Bill -- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN