[PATCH] vivi: Don't depend on FONTS
CONFIG_FONTS has nothing to do with whether find_font() is defined. Signed-off-by: Ben Hutchings --- drivers/media/video/Kconfig |2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index f6e4d04..7528d50 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -539,7 +539,7 @@ config VIDEO_VIU config VIDEO_VIVI tristate "Virtual Video Driver" depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 - depends on (FRAMEBUFFER_CONSOLE || STI_CONSOLE) && FONTS + depends on FRAMEBUFFER_CONSOLE || STI_CONSOLE select FONT_8x16 select VIDEOBUF_VMALLOC default n -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Asus MyCinema P7131 Dual support
Hi Dejan, Am Montag, den 04.10.2010, 01:48 +0200 schrieb Dejan Rodiger: > Hi Hermann, > > I finally found the time to wire analog antena and I checked it with > my TV if it is working correctly. > Since I am using local cable provider which didn't upgrade their > system in 10 years and they are still broadcast in analog, I had a > problem off finding channel list, so in the end I tried tvtime-scanner > and it found about 58 channels. But, out of this 58 most of them were > not good (no signal). I was able to finetune few programs. My main > programs (local Croatian TV stations) were not found. Maybe I need to > finetune every found station. that doesn't sound good. The card should just work. Anyone else still out there with the same? Or are we finally destroyed by so called "compile fixes" and linux "next" stuff ? > I also tried zapping which crashed my X. Yeah, goes on since years, but has still good vbi :) dunno, if Michael has further plans on that. > I am also lost in setting mythtv. I set analog tunner on /dev/video0. > But I think I have a problem of setting the channel list for my local > cable provider. Is it possible to scan whole list or something. If you > have any reading recommendation to set this, I would be helpfull > > Thanks > -- > Dejan Rodiger > S: callto://drodiger For DVB-T try "kaffeine" or low level tools. Allow full delay for tuning and locking. If that fails, and no other well known other hardware restrictions are in place, we have some broken code. I do have a triple Asus 3in1 OEM with the same LNA config as that first hybrid board has. If really broken, not noticed yet here, but also not used since long, we can meet on some same code base and track it down. Cheers, Hermann > > > > On Thu, Sep 23, 2010 at 00:46, wrote: > > > > > > Hi Dejan, > > > > - Original Nachricht > > Von: Dejan Rodiger > > An: hermann pitton > > Datum: 22.09.2010 13:20 > > Betreff: Re: [linux-dvb] Asus MyCinema P7131 Dual support > > > >> Hi Herman, > >> > >> here is dmesg output without forcing card=78. > >> As I see it uses card=112, autodetected > >> > >> [ 16.043345] IR RC6 protocol handler initialized > >> [ 16.173473] IR JVC protocol handler initialized > >> [ 16.236641] IR Sony protocol handler initialized > >> [ 16.433187] lirc_dev: IR Remote Control driver registered, major 250 > >> [ 16.572705] IR LIRC bridge handler initialized > >> [ 16.894983] Linux video capture interface: v2.00 > >> [ 16.957585] saa7130/34: v4l2 driver version 0.2.16 loaded > >> [ 16.958300] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 > >> [ 16.958306] alloc irq_desc for 18 on node 0 > >> [ 16.958309] alloc kstat_irqs on node 0 > >> [ 16.958320] saa7134 :01:06.0: PCI INT A -> Link[APC3] -> GSI 18 > >> (level, low) -> IRQ 18 > >> [ 16.958327] saa7133[0]: found at :01:06.0, rev: 209, irq: 18, > >> latency: 32, mmio: 0xfdeff000 > >> [ 16.958334] saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 > >> Hybrid [card=112,autodetected] > >> [ 16.958378] saa7133[0]: board init: gpio is 0 > >> [ 17.010075] Registered IR keymap rc-asus-pc39 > >> [ 17.010197] input: saa7134 IR (ASUSTeK P7131 Hybri as > >> /devices/pci:00/:00:09.0/:01:06.0/rc/rc0/input4 > >> [ 17.010268] rc0: saa7134 IR (ASUSTeK P7131 Hybri as > >> /devices/pci:00/:00:09.0/:01:06.0/rc/rc0 > >> [ 17.190477] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 > >> 43 a9 1c 55 d2 b2 92 > >> [ 17.190490] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190502] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 > >> ff 00 d5 ff ff ff ff > >> [ 17.190513] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190524] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 > >> 50 ff ff ff ff ff ff > >> [ 17.190534] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190545] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190556] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190566] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190577] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190587] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190598] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190609] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190620] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190630] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff ff ff > >> [ 17.190641] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff > >> ff ff ff ff ff
udev-161 dvbT kernel-2.6.35.5
Greetings, I am attempting to set up DVBT on a computer with these: cpu: amd64 2 cores, gpu nvidia gforce nouveau drm o/s cblfslinux 64-bit kernel-2.6.35.5 udev-161 kde-4.4.5 dvb device Hauppauge wintvNovaT DVBT usb2 I have the foollowing in /lib/firmware dvb-usb-dib0700-01.fw dvb-usb-dib0700-1.20.fw # my udev rule looks like so:- KERNEL="dvb*", PROGRAM="/etc/udev/scripts/dvb.sh %k", ATTRS{serial}=="123456789a", ATTRS{product}=="Nova-T Stick", GROUP="video", MODE="0660", SYMLINK+="Nova-T-usb2" ## the machine dwells a litle on booting ## lsmod yoelds:- root [ ~teeveey ]# lsmod Module Size Used by snd_hda_codec_realtek 294785 1 dvb_usb_dib070077625 0 dib7000p 15705 1 dvb_usb_dib0700 dib009012297 1 dvb_usb_dib0700 dib7000m 12868 1 dvb_usb_dib0700 dib0070 7510 1 dvb_usb_dib0700 dvb_usb16683 1 dvb_usb_dib0700 dib800023992 1 dvb_usb_dib0700 dvb_core 87312 3 dib7000p,dvb_usb,dib8000 dib3000mc 11061 1 dvb_usb_dib0700 dibx000_common 3213 4 dib7000p,dib7000m,dib8000,dib3000mc nouveau 387642 2 ttm53985 1 nouveau drm_kms_helper 25234 1 nouveau snd_hda_intel 24006 3 snd_hda_codec 82672 2 snd_hda_codec_realtek,snd_hda_intel pcspkr 1854 0 ohci_hcd 33354 0 cfbcopyarea 3037 1 nouveau cfbimgblt 2205 1 nouveau cfbfillrect 3113 1 nouveau snd_hwdep 6048 1 snd_hda_codec root [ ~teeveey ]# # but ls for /dev/dvb* yields nought like so:- root [ ~teeveey ]# ls -l /dev/dvb* ls: cannot access /dev/dvb*: No such file or directory root [ ~teeveey ]# I used the said device successfully in a build wih 2,6.28.8/udev-113 last year but it appears the setup for DVB on linux has changed recently. Accordingly guidance on where I am gping wrong would be much appreciated. Yours sincerely sibuXolo -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [linux-dvb] Asus MyCinema P7131 Dual support
Hi Hermann, I finally found the time to wire analog antena and I checked it with my TV if it is working correctly. Since I am using local cable provider which didn't upgrade their system in 10 years and they are still broadcast in analog, I had a problem off finding channel list, so in the end I tried tvtime-scanner and it found about 58 channels. But, out of this 58 most of them were not good (no signal). I was able to finetune few programs. My main programs (local Croatian TV stations) were not found. Maybe I need to finetune every found station. I also tried zapping which crashed my X. I am also lost in setting mythtv. I set analog tunner on /dev/video0. But I think I have a problem of setting the channel list for my local cable provider. Is it possible to scan whole list or something. If you have any reading recommendation to set this, I would be helpfull Thanks -- Dejan Rodiger S: callto://drodiger On Thu, Sep 23, 2010 at 00:46, wrote: > > > Hi Dejan, > > - Original Nachricht > Von: Dejan Rodiger > An: hermann pitton > Datum: 22.09.2010 13:20 > Betreff: Re: [linux-dvb] Asus MyCinema P7131 Dual support > >> Hi Herman, >> >> here is dmesg output without forcing card=78. >> As I see it uses card=112, autodetected >> >> [ 16.043345] IR RC6 protocol handler initialized >> [ 16.173473] IR JVC protocol handler initialized >> [ 16.236641] IR Sony protocol handler initialized >> [ 16.433187] lirc_dev: IR Remote Control driver registered, major 250 >> [ 16.572705] IR LIRC bridge handler initialized >> [ 16.894983] Linux video capture interface: v2.00 >> [ 16.957585] saa7130/34: v4l2 driver version 0.2.16 loaded >> [ 16.958300] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 >> [ 16.958306] alloc irq_desc for 18 on node 0 >> [ 16.958309] alloc kstat_irqs on node 0 >> [ 16.958320] saa7134 :01:06.0: PCI INT A -> Link[APC3] -> GSI 18 >> (level, low) -> IRQ 18 >> [ 16.958327] saa7133[0]: found at :01:06.0, rev: 209, irq: 18, >> latency: 32, mmio: 0xfdeff000 >> [ 16.958334] saa7133[0]: subsystem: 1043:4876, board: ASUSTeK P7131 >> Hybrid [card=112,autodetected] >> [ 16.958378] saa7133[0]: board init: gpio is 0 >> [ 17.010075] Registered IR keymap rc-asus-pc39 >> [ 17.010197] input: saa7134 IR (ASUSTeK P7131 Hybri as >> /devices/pci:00/:00:09.0/:01:06.0/rc/rc0/input4 >> [ 17.010268] rc0: saa7134 IR (ASUSTeK P7131 Hybri as >> /devices/pci:00/:00:09.0/:01:06.0/rc/rc0 >> [ 17.190477] saa7133[0]: i2c eeprom 00: 43 10 76 48 54 20 1c 00 43 >> 43 a9 1c 55 d2 b2 92 >> [ 17.190490] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190502] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 >> ff 00 d5 ff ff ff ff >> [ 17.190513] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190524] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 55 >> 50 ff ff ff ff ff ff >> [ 17.190534] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190545] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190556] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190566] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190577] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190587] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190598] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190609] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190620] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190630] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> [ 17.190641] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff >> ff ff ff ff ff ff ff >> >> [ 17.610120] tuner 2-004b: chip found @ 0x96 (saa7133[0]) >> >> [ 17.780037] tda829x 2-004b: setting tuner address to 61 >> [ 17.940020] tda829x 2-004b: type set to tda8290+75a >> >> [ 24.000114] saa7133[0]: registered device video0 [v4l2] >> [ 24.000150] saa7133[0]: registered device vbi0 >> [ 24.000182] saa7133[0]: registered device radio0 >> [ 24.027730] saa7134 ALSA driver for DMA sound loaded >> [ 24.027770] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 18 >> registered as card -2 >> >> [ 25.900159] DVB: registering new adapter (saa7133[0]) >> [ 25.900165] DVB: registering adapter 0 frontend 0 (Philips >> TDA10046H DVB-T)... >> >> [ 26.710050] tda1004x: setting up plls for 48MHz sampling clock >> [ 27.710043] tda1004x: found firmware revision 29 -- ok >> >> >> -- >> Dejan Rodiger >> M: +385917829076 >> S: callto://drodiger >> > > all looks fine now. > > With auto detection you should have correct LNA support for ana
[GIT PATCHES FOR 2.6.37] Support for NetUP Dual DVB-T/C CI RF card
Patches to support for NetUP Dual DVB-T/C-CI RF from NetUP Inc. http://linuxtv.org/wiki/index.php/NetUP_Dual_DVB_T_C_CI_RF Features: PCI-e x1 Supports two DVB-T/DVB-C transponders simultaneously Supports two analog audio/video channels simultaneously Independent descrambling of two transponders Hardware PID filtering Components: Conexant CX23885 STM STV0367 low-power and ultra-compact combo DVB-T/C single-chip receiver Xceive XC5000 silicon TV tuner Altera FPGA for Common Interafce The following changes since commit c8dd732fd119ce6d562d5fa82a10bbe75a376575: V4L/DVB: gspca - sonixj: Have 0c45:6130 handled by sonixj instead of sn9c102 (2010-10-01 18:14:35 -0300) are available in the git repository at: http://udev.netup.ru/git/v4l-dvb.git netup-for-media-tree Abylay Ospan (6): cx23885: Altera FPGA CI interface reworked. stv0367: change default value for AGC register. stv0367: implement uncorrected blocks counter. cx23885, cimax2.c: Fix case of two CAM insertion irq. Fix CI code for NetUP Dual DVB-T/C CI RF card Force xc5000 firmware loading for NetUP Dual DVB-T/C CI RF card Igor M. Liplianin (14): Altera FPGA firmware download module. Altera FPGA based CI driver module. Support for stv0367 multi-standard demodulator. xc5000: add support for DVB-C tuning. Initial commit to support NetUP Dual DVB-T/C CI RF card. cx23885: implement tuner_bus parameter for cx23885_board structure. cx23885: implement num_fds_portb, num_fds_portc parameters for cx23885_board structure. stv0367: Fix potential divide error cx23885: remove duplicate set interrupt mask stv0367: coding style corrections cx25840: Fix subdev registration and typo in cx25840-core.c cx23885: 0xe becomes 0xc again for NetUP Dual DVB-S2 cx23885: disable MSI for NetUP cards, otherwise CI is not working cx23885, altera-ci: enable all PID's less than 0x20 in hardware PID filter. drivers/media/common/tuners/xc5000.c| 18 + drivers/media/dvb/frontends/Kconfig |7 + drivers/media/dvb/frontends/Makefile|1 + drivers/media/dvb/frontends/stv0367.c | 3419 + drivers/media/dvb/frontends/stv0367.h | 62 + drivers/media/dvb/frontends/stv0367_priv.h | 211 ++ drivers/media/dvb/frontends/stv0367_regs.h | 3614 +++ drivers/media/video/cx23885/Kconfig | 12 +- drivers/media/video/cx23885/Makefile|1 + drivers/media/video/cx23885/altera-ci.c | 841 +++ drivers/media/video/cx23885/altera-ci.h | 102 + drivers/media/video/cx23885/cimax2.c| 24 +- drivers/media/video/cx23885/cx23885-cards.c | 116 +- drivers/media/video/cx23885/cx23885-core.c | 35 +- drivers/media/video/cx23885/cx23885-dvb.c | 175 ++- drivers/media/video/cx23885/cx23885-reg.h |1 + drivers/media/video/cx23885/cx23885-video.c |7 +- drivers/media/video/cx23885/cx23885.h |7 +- drivers/media/video/cx25840/cx25840-core.c |4 +- drivers/misc/Kconfig|1 + drivers/misc/Makefile |1 + drivers/misc/stapl-altera/Kconfig |8 + drivers/misc/stapl-altera/Makefile |3 + drivers/misc/stapl-altera/altera.c | 2739 drivers/misc/stapl-altera/jbicomp.c | 163 ++ drivers/misc/stapl-altera/jbiexprt.h| 94 + drivers/misc/stapl-altera/jbijtag.c | 1038 drivers/misc/stapl-altera/jbijtag.h | 83 + drivers/misc/stapl-altera/jbistub.c | 70 + include/misc/altera.h | 49 + 30 files changed, 12872 insertions(+), 34 deletions(-) create mode 100644 drivers/media/dvb/frontends/stv0367.c create mode 100644 drivers/media/dvb/frontends/stv0367.h create mode 100644 drivers/media/dvb/frontends/stv0367_priv.h create mode 100644 drivers/media/dvb/frontends/stv0367_regs.h create mode 100644 drivers/media/video/cx23885/altera-ci.c create mode 100644 drivers/media/video/cx23885/altera-ci.h create mode 100644 drivers/misc/stapl-altera/Kconfig create mode 100644 drivers/misc/stapl-altera/Makefile create mode 100644 drivers/misc/stapl-altera/altera.c create mode 100644 drivers/misc/stapl-altera/jbicomp.c create mode 100644 drivers/misc/stapl-altera/jbiexprt.h create mode 100644 drivers/misc/stapl-altera/jbijtag.c create mode 100644 drivers/misc/stapl-altera/jbijtag.h create mode 100644 drivers/misc/stapl-altera/jbistub.c create mode 100644 include/misc/altera.h -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 16/16] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functions
For just the pvrusb2 part of the patch series below Acked-By: Mike Isely On Fri, 24 Sep 2010, Laurent Pinchart wrote: > The argument isn't used anymore by the functions, remote it. > > Signed-off-by: Laurent Pinchart > --- > drivers/media/radio/radio-si4713.c|2 +- > drivers/media/video/au0828/au0828-cards.c |4 ++-- > drivers/media/video/bt8xx/bttv-cards.c| 22 +++--- > drivers/media/video/cafe_ccic.c |2 +- > drivers/media/video/cx18/cx18-i2c.c |8 > drivers/media/video/cx231xx/cx231xx-cards.c |4 ++-- > drivers/media/video/cx23885/cx23885-cards.c |2 +- > drivers/media/video/cx23885/cx23885-video.c |4 ++-- > drivers/media/video/cx88/cx88-cards.c |9 - > drivers/media/video/cx88/cx88-video.c |7 +++ > drivers/media/video/davinci/vpfe_capture.c|1 - > drivers/media/video/davinci/vpif_capture.c|1 - > drivers/media/video/davinci/vpif_display.c|2 +- > drivers/media/video/em28xx/em28xx-cards.c | 18 +- > drivers/media/video/fsl-viu.c |2 +- > drivers/media/video/ivtv/ivtv-i2c.c | 22 +- > drivers/media/video/mxb.c | 12 ++-- > drivers/media/video/pvrusb2/pvrusb2-hdw.c |6 ++ > drivers/media/video/saa7134/saa7134-cards.c |8 > drivers/media/video/saa7134/saa7134-core.c|4 ++-- > drivers/media/video/sh_vou.c |2 +- > drivers/media/video/soc_camera.c |2 +- > drivers/media/video/usbvision/usbvision-i2c.c |6 +++--- > drivers/media/video/v4l2-common.c | 15 +-- > drivers/media/video/vino.c|4 ++-- > drivers/media/video/zoran/zoran_card.c|5 ++--- > drivers/staging/go7007/go7007-driver.c|2 +- > drivers/staging/tm6000/tm6000-cards.c |4 ++-- > include/media/v4l2-common.h | 16 ++-- > 29 files changed, 88 insertions(+), 108 deletions(-) > > diff --git a/drivers/media/radio/radio-si4713.c > b/drivers/media/radio/radio-si4713.c > index 045b10f..d49c215 100644 > --- a/drivers/media/radio/radio-si4713.c > +++ b/drivers/media/radio/radio-si4713.c > @@ -291,7 +291,7 @@ static int radio_si4713_pdriver_probe(struct > platform_device *pdev) > goto unregister_v4l2_dev; > } > > - sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, NULL, > + sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, > pdata->subdev_board_info, NULL); > if (!sd) { > dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n"); > diff --git a/drivers/media/video/au0828/au0828-cards.c > b/drivers/media/video/au0828/au0828-cards.c > index 0453816..01be89f 100644 > --- a/drivers/media/video/au0828/au0828-cards.c > +++ b/drivers/media/video/au0828/au0828-cards.c > @@ -212,7 +212,7 @@ void au0828_card_setup(struct au0828_dev *dev) > be abstracted out if we ever need to support a different > demod) */ > sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, > - NULL, "au8522", 0x8e >> 1, NULL); > + "au8522", 0x8e >> 1, NULL); > if (sd == NULL) > printk(KERN_ERR "analog subdev registration failed\n"); > } > @@ -221,7 +221,7 @@ void au0828_card_setup(struct au0828_dev *dev) > if (dev->board.tuner_type != TUNER_ABSENT) { > /* Load the tuner module, which does the attach */ > sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap, > - NULL, "tuner", dev->board.tuner_addr, NULL); > + "tuner", dev->board.tuner_addr, NULL); > if (sd == NULL) > printk(KERN_ERR "tuner subdev registration fail\n"); > > diff --git a/drivers/media/video/bt8xx/bttv-cards.c > b/drivers/media/video/bt8xx/bttv-cards.c > index 87d8b00..49efcf6 100644 > --- a/drivers/media/video/bt8xx/bttv-cards.c > +++ b/drivers/media/video/bt8xx/bttv-cards.c > @@ -3529,7 +3529,7 @@ void __devinit bttv_init_card2(struct bttv *btv) > struct v4l2_subdev *sd; > > sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, > - &btv->c.i2c_adap, NULL, "saa6588", 0, addrs); > + &btv->c.i2c_adap, "saa6588", 0, addrs); > btv->has_saa6588 = (sd != NULL); > } > > @@ -3554,7 +3554,7 @@ void __devinit bttv_init_card2(struct bttv *btv) > }; > > btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, > - &btv->c.i2c_adap, NULL, "msp3400", 0, addrs); > + &btv->c.i2c_adap, "msp3400", 0, addrs); > if (btv->sd_msp34xx) >
Re: [PATCH 07/16] pvrusb2: Don't use module names to load I2C modules
Acked-By: Mike Isely On Fri, 24 Sep 2010, Laurent Pinchart wrote: > With the v4l2_i2c_new_subdev* functions now supporting loading modules > based on modaliases, replace the hardcoded module name passed to those > functions by NULL. > > All corresponding I2C modules have been checked, and all of them include > a module aliases table with names corresponding to what the pvrusb2 > driver uses. > > Signed-off-by: Laurent Pinchart > --- > drivers/media/video/pvrusb2/pvrusb2-hdw.c | 11 ++- > 1 files changed, 2 insertions(+), 9 deletions(-) > > diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c > b/drivers/media/video/pvrusb2/pvrusb2-hdw.c > index 70ea578..bef2027 100644 > --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c > +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c > @@ -2082,20 +2082,13 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, > return -EINVAL; > } > > - /* Note how the 2nd and 3rd arguments are the same for > - * v4l2_i2c_new_subdev(). Why? > - * Well the 2nd argument is the module name to load, while the 3rd > - * argument is documented in the framework as being the "chipid" - > - * and every other place where I can find examples of this, the > - * "chipid" appears to just be the module name again. So here we > - * just do the same thing. */ > if (i2ccnt == 1) { > pvr2_trace(PVR2_TRACE_INIT, > "Module ID %u:" > " Setting up with specified i2c address 0x%x", > mid, i2caddr[0]); > sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, > - fname, fname, > + NULL, fname, >i2caddr[0], NULL); > } else { > pvr2_trace(PVR2_TRACE_INIT, > @@ -2103,7 +2096,7 @@ static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw, > " Setting up with address probe list", > mid); > sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap, > - fname, fname, > + NULL, fname, > 0, i2caddr); > } > > -- Mike Isely isely @ isely (dot) net PGP: 03 54 43 4D 75 E5 CC 92 71 16 01 E2 B5 F5 C1 E8 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[cron job] v4l-dvb daily build 2.6.26 and up: ERRORS
This message is generated daily by a cron job that builds v4l-dvb for the kernels and architectures in the list below. Results of the daily build of v4l-dvb: date:Sun Oct 3 19:00:13 CEST 2010 path:http://www.linuxtv.org/hg/v4l-dvb changeset: 15164:1da5fed5c8b2 git master: 3e6dce76d99b328716b43929b9195adfee1de00c git media-master: c8dd732fd119ce6d562d5fa82a10bbe75a376575 gcc version: i686-linux-gcc (GCC) 4.5.1 host hardware:x86_64 host os: 2.6.32.5 linux-git-armv5: WARNINGS linux-git-armv5-davinci: WARNINGS linux-git-armv5-ixp: WARNINGS linux-git-armv5-omap2: WARNINGS linux-git-i686: WARNINGS linux-git-m32r: WARNINGS linux-git-mips: WARNINGS linux-git-powerpc64: WARNINGS linux-git-x86_64: WARNINGS linux-2.6.32.6-armv5: WARNINGS linux-2.6.33-armv5: WARNINGS linux-2.6.34-armv5: WARNINGS linux-2.6.35.3-armv5: WARNINGS linux-2.6.32.6-armv5-davinci: ERRORS linux-2.6.33-armv5-davinci: ERRORS linux-2.6.34-armv5-davinci: ERRORS linux-2.6.35.3-armv5-davinci: ERRORS linux-2.6.32.6-armv5-ixp: ERRORS linux-2.6.33-armv5-ixp: ERRORS linux-2.6.34-armv5-ixp: ERRORS linux-2.6.35.3-armv5-ixp: ERRORS linux-2.6.32.6-armv5-omap2: ERRORS linux-2.6.33-armv5-omap2: ERRORS linux-2.6.34-armv5-omap2: ERRORS linux-2.6.35.3-armv5-omap2: ERRORS linux-2.6.26.8-i686: WARNINGS linux-2.6.27.44-i686: WARNINGS linux-2.6.28.10-i686: WARNINGS linux-2.6.29.1-i686: WARNINGS linux-2.6.30.10-i686: WARNINGS linux-2.6.31.12-i686: WARNINGS linux-2.6.32.6-i686: WARNINGS linux-2.6.33-i686: WARNINGS linux-2.6.34-i686: WARNINGS linux-2.6.35.3-i686: WARNINGS linux-2.6.32.6-m32r: WARNINGS linux-2.6.33-m32r: WARNINGS linux-2.6.34-m32r: WARNINGS linux-2.6.35.3-m32r: WARNINGS linux-2.6.32.6-mips: WARNINGS linux-2.6.33-mips: WARNINGS linux-2.6.34-mips: WARNINGS linux-2.6.35.3-mips: WARNINGS linux-2.6.32.6-powerpc64: WARNINGS linux-2.6.33-powerpc64: WARNINGS linux-2.6.34-powerpc64: WARNINGS linux-2.6.35.3-powerpc64: WARNINGS linux-2.6.26.8-x86_64: WARNINGS linux-2.6.27.44-x86_64: WARNINGS linux-2.6.28.10-x86_64: WARNINGS linux-2.6.29.1-x86_64: WARNINGS linux-2.6.30.10-x86_64: WARNINGS linux-2.6.31.12-x86_64: WARNINGS linux-2.6.32.6-x86_64: WARNINGS linux-2.6.33-x86_64: WARNINGS linux-2.6.34-x86_64: WARNINGS linux-2.6.35.3-x86_64: WARNINGS spec-git: OK sparse: ERRORS Detailed results are available here: http://www.xs4all.nl/~hverkuil/logs/Sunday.log Full logs are available here: http://www.xs4all.nl/~hverkuil/logs/Sunday.tar.bz2 The V4L-DVB specification from this daily build is here: http://www.xs4all.nl/~hverkuil/spec/media.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [cron job] v4l-dvb daily build 2.6.26 and up: ERRORS
Hi all, On Saturday, October 02, 2010 21:15:04 Hans Verkuil wrote: > This message is generated daily by a cron job that builds v4l-dvb for > the kernels and architectures in the list below. > > Results of the daily build of v4l-dvb: > > date:Sat Oct 2 19:00:05 CEST 2010 > path:http://www.linuxtv.org/hg/v4l-dvb > changeset: 15164:1da5fed5c8b2 > git master: 3e6dce76d99b328716b43929b9195adfee1de00c > git media-master: c8dd732fd119ce6d562d5fa82a10bbe75a376575 > gcc version: i686-linux-gcc (GCC) 4.5.1 I've updated the compiler to the latest 4.5.1 release. > host hardware:x86_64 > host os: 2.6.32.5 > > linux-git-armv5: WARNINGS > linux-git-armv5-davinci: WARNINGS > linux-git-armv5-ixp: WARNINGS > linux-git-armv5-omap2: WARNINGS > linux-git-i686: WARNINGS > linux-git-m32r: WARNINGS > linux-git-mips: WARNINGS > linux-git-powerpc64: WARNINGS > linux-git-x86_64: WARNINGS The git compiles were broken, particularly for the arm. They are now fixed. But note that there are *many* warnings being generated, mostly to do with signedness issues. Probably as a consequence of the compiler upgrade. Anyone interested in a janitorial job? Regards, Hans > linux-2.6.32.6-armv5: WARNINGS > linux-2.6.33-armv5: WARNINGS > linux-2.6.34-armv5: WARNINGS > linux-2.6.35.3-armv5: WARNINGS > linux-2.6.36-rc2-armv5: ERRORS > linux-2.6.32.6-armv5-davinci: ERRORS > linux-2.6.33-armv5-davinci: ERRORS > linux-2.6.34-armv5-davinci: ERRORS > linux-2.6.35.3-armv5-davinci: ERRORS > linux-2.6.36-rc2-armv5-davinci: ERRORS > linux-2.6.32.6-armv5-ixp: ERRORS > linux-2.6.33-armv5-ixp: ERRORS > linux-2.6.34-armv5-ixp: ERRORS > linux-2.6.35.3-armv5-ixp: ERRORS > linux-2.6.36-rc2-armv5-ixp: ERRORS > linux-2.6.32.6-armv5-omap2: ERRORS > linux-2.6.33-armv5-omap2: ERRORS > linux-2.6.34-armv5-omap2: ERRORS > linux-2.6.35.3-armv5-omap2: ERRORS > linux-2.6.36-rc2-armv5-omap2: ERRORS > linux-2.6.26.8-i686: WARNINGS > linux-2.6.27.44-i686: WARNINGS > linux-2.6.28.10-i686: WARNINGS > linux-2.6.29.1-i686: WARNINGS > linux-2.6.30.10-i686: WARNINGS > linux-2.6.31.12-i686: WARNINGS > linux-2.6.32.6-i686: WARNINGS > linux-2.6.33-i686: WARNINGS > linux-2.6.34-i686: WARNINGS > linux-2.6.35.3-i686: WARNINGS > linux-2.6.36-rc2-i686: ERRORS > linux-2.6.32.6-m32r: WARNINGS > linux-2.6.33-m32r: WARNINGS > linux-2.6.34-m32r: WARNINGS > linux-2.6.35.3-m32r: WARNINGS > linux-2.6.36-rc2-m32r: ERRORS > linux-2.6.32.6-mips: WARNINGS > linux-2.6.33-mips: WARNINGS > linux-2.6.34-mips: WARNINGS > linux-2.6.35.3-mips: WARNINGS > linux-2.6.36-rc2-mips: ERRORS > linux-2.6.32.6-powerpc64: WARNINGS > linux-2.6.33-powerpc64: WARNINGS > linux-2.6.34-powerpc64: WARNINGS > linux-2.6.35.3-powerpc64: WARNINGS > linux-2.6.36-rc2-powerpc64: ERRORS > linux-2.6.26.8-x86_64: WARNINGS > linux-2.6.27.44-x86_64: WARNINGS > linux-2.6.28.10-x86_64: WARNINGS > linux-2.6.29.1-x86_64: WARNINGS > linux-2.6.30.10-x86_64: WARNINGS > linux-2.6.31.12-x86_64: WARNINGS > linux-2.6.32.6-x86_64: WARNINGS > linux-2.6.33-x86_64: WARNINGS > linux-2.6.34-x86_64: WARNINGS > linux-2.6.35.3-x86_64: WARNINGS > linux-2.6.36-rc2-x86_64: ERRORS > spec-git: OK > sparse: ERRORS > > Detailed results are available here: > > http://www.xs4all.nl/~hverkuil/logs/Saturday.log > > Full logs are available here: > > http://www.xs4all.nl/~hverkuil/logs/Saturday.tar.bz2 > > The V4L-DVB specification from this daily build is here: > > http://www.xs4all.nl/~hverkuil/spec/media.html > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- Hans Verkuil - video4linux developer - sponsored by TANDBERG, part of Cisco -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[v4l/dvb] Support of TeVii S464
Are there plans to support the TeVii S464?? Drivers build on the v4l-branch are available by TeVii. Also they are merged in s2-liplianin and works well. ___ GRATIS: Spider-Man 1-3 sowie 300 weitere Videos! Jetzt kostenlose Movie-FLAT freischalten! http://movieflat.web.de -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[no subject]
Hello, The v4l2 controls for my cam give the interval 0-6000 for exposure, but anything over 4000 gives black screen. The automatic exposure control (software, the cam has no hardware exp control) starts as usual at something low, if there is not enough light the exp control pumps up the exposure a little - just as it should be, but the when exposure gets over 4000 the screen gets black and exp control pumps it all the way to 6000 (which is black as well). The workaround is to start v4l2ucp, to turn off auto exposure, then set exposure to 3999. But that is still a bit dark, so I set the gain at 6 or 8 and that gives video of good quality. The driver at http://groups.google.com/group/microdia worked well. The problems started when I switched to gspca (the driver at that google group was merged in gspca). I have some experience with C, but have never done any serious source diving. Can someone guide me trough. Maybe a personal exchange of mails will be better suited until a patch is ready. Cheers Stefan Krastanov -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Terratec Cinergy Hybrid T USB XS FR is no longer working
Hi, I upgraded my opensuse kernel to version 2.6.31.14-0.1 and compiled v4l-dvd downloaded from Mercurial and now my device Terratec Cinergy Hybrid T USB XS FR doesn't work. Here is my dmesg : [ 845.348066] usb 2-3: new high speed USB device using ehci_hcd and address 4 [ 845.490641] usb 2-3: New USB device found, idVendor=0ccd, idProduct=004c [ 845.490659] usb 2-3: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 845.490671] usb 2-3: Product: Cinergy Hybrid T USB XS FR [ 845.490681] usb 2-3: Manufacturer: TerraTec Electronic GmbH [ 845.490850] usb 2-3: configuration #1 chosen from 1 choice [ 845.515209] v4l2_common: disagrees about version of symbol v4l2_device_register_subdev [ 845.515221] v4l2_common: Unknown symbol v4l2_device_register_subdev [ 845.515342] v4l2_common: disagrees about version of symbol v4l2_device_unregister_subdev [ 845.515350] v4l2_common: Unknown symbol v4l2_device_unregister_subdev [ 845.584812] v4l2_common: disagrees about version of symbol v4l2_device_register_subdev [ 845.584825] v4l2_common: Unknown symbol v4l2_device_register_subdev [ 845.584946] v4l2_common: disagrees about version of symbol v4l2_device_unregister_subdev [ 845.584954] v4l2_common: Unknown symbol v4l2_device_unregister_subdev [ 845.690309] v4l2_common: disagrees about version of symbol v4l2_device_register_subdev [ 845.690328] v4l2_common: Unknown symbol v4l2_device_register_subdev [ 845.690524] v4l2_common: disagrees about version of symbol v4l2_device_unregister_subdev [ 845.690537] v4l2_common: Unknown symbol v4l2_device_unregister_subdev [ 845.706641] usbcore: registered new interface driver snd-usb-audio What can I do in order to solve the problem. Thanks in advance. Regards. Michel. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html