Re: Watching the prgress of dd if=drive1 of=drive2
On Mon, 25 Feb 2008, Jan Stary wrote: > On Feb 23 12:15:21, Jon wrote: > > I'm using dd to clone a drive. How can I watch the progress of this or > > see the transfer rate in real time? > > You can use 'fstat -o' on the device file. > > Jan If the dd is running on a terminal, sending the "status" signal will cause a little printout. Usually that's a T, which for console may need to be set first with $ stty status ^T where ^ and T are normal characters. See man stty and also note the kerninfo option. Dave -- The future isn't what it used to be. -- G'kar
Re: Watching the prgress of dd if=drive1 of=drive2
On Feb 23 12:15:21, Jon wrote: > I'm using dd to clone a drive. How can I watch the progress of this or > see the transfer rate in real time? You can use 'fstat -o' on the device file. Jan
Re: Watching the prgress of dd if=drive1 of=drive2
On Saturday 23 February 2008 15:15:21 Jon wrote: > I'm using dd to clone a drive. How can I watch the progress of this or > see the transfer rate in real time? It doesn't. dd only reports stats at the end. man dd for more info. --STeve Andre'
Re: Thank you: Re: Watching the prgress of dd if=drive1 of=drive2
On Sat, 2008-02-23 at 13:46 -0800, Jon wrote: > on some learning paths here. This mailing list is awesome. Thank you. just remember that when 4.3 CD pre-release-sales are announced :) IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.
Re: Watching the prgress of dd if=drive1 of=drive2
Hi! On Sat, Feb 23, 2008 at 09:31:00PM +, Alexey Vatchenko wrote: >On 2008-02-23, Brian A. Seklecki (Mobile) <[EMAIL PROTECTED]> wrote: >> It should accept SIGINFO (control+G) on most terminals. >Isn't it control+T? By default it isn't mapped at all. So use stty status ^t, for example, before starting dd. (Or other commands that do something useful with SIGINFO, like ping or dump.) Kind regards, Hannah.
Thank you: Re: Watching the prgress of dd if=drive1 of=drive2
I solved the problem with (I believe it was) the first response out of the four or five I got almost immediately. I got four _separate_ completely valid solutions and this has pointed me on some learning paths here. This mailing list is awesome. Thank you.
Re: Watching the prgress of dd if=drive1 of=drive2
On 2008-02-23, Brian A. Seklecki (Mobile) <[EMAIL PROTECTED]> wrote: > > It should accept SIGINFO (control+G) on most terminals. > Isn't it control+T? -- Alexey Vatchenko http://www.bsdua.org
Re: Watching the prgress of dd if=drive1 of=drive2
On Sat, Feb 23, 2008 at 9:15 PM, Jon <[EMAIL PROTECTED]> wrote: > I'm using dd to clone a drive. How can I watch the progress of this or > see the transfer rate in real time? > > >From the manpage: If dd receives a SIGINFO (see the ``status'' argument for stty(1)) sig- nal, the current input and output block counts will be written to the standard error output in the same format as the standard completion mes- sage. -- Pierre Riteau
Re: Watching the prgress of dd if=drive1 of=drive2
On 23/02/2008, Jon <[EMAIL PROTECTED]> wrote: > I'm using dd to clone a drive. How can I watch the progress of this or > see the transfer rate in real time? Try sending it a SIGINFO (as it says in the man page). -- steev http://www.daikaiju.org.uk/~steve/
Re: Watching the prgress of dd if=drive1 of=drive2
On Sat, 2008-02-23 at 12:15 -0800, Jon wrote: > I'm using dd to clone a drive. How can I watch the progress of this or > see the transfer rate in real time? It should accept SIGINFO (control+G) on most terminals. You may also be able to compile progress(1) ~BAS IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.
Re: Watching the prgress of dd if=drive1 of=drive2
On Sat, 2008-02-23 at 12:15 -0800, Jon wrote: > I'm using dd to clone a drive. How can I watch the progress of this or > see the transfer rate in real time? > http://www.openbsd.org/cgi-bin/cvsweb/src/bin/dd/dd.c?rev=1.15&content-type=text/x-cvsweb-markup main(int argc, char *argv[]) (void)signal(SIGINFO, summaryx);