Re: alix 2d13 + 6.4: should it work?
On Wed, Nov 21, 2018 at 05:37:05PM -0700, Theo de Raadt wrote: > First time you need to > > stty com0 > set tty com0 > > then you can boot. > > The installer will remember this for next time, but our kernel does not > know the speed so early on. That was it! Excellent: boot> stty com0 38400 boot> set tty com0 switching console to com0 Kernel boot now looks like this: cannot open hd0a:/etc/random.seed: No such file or directory booting hd0a:/6.4/i386/bsd.rd: 3111423+1360896+3362824+0+454656 [363995+98+289392+283301]=0x8ced6c entry point at 0x2000d4 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2018 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.4 (RAMDISK_CD) #916: Thu Oct 11 14:00:12 MDT 2018 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD real mem = 267976704 (255MB) avail mem = 254033920 (242MB) mainbus0 at root bios0 at mainbus0: date 01/15/14, BIOS32 rev. 0 @ 0xfd0e4 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xe/0xa800 cpu0 at mainbus0: (uniprocessor) cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 MHz, 05-0a-02 cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW ... Some time later: CONGRATULATIONS! Your OpenBSD install has been successfully completed! Thanks Theo for the tip and for all the work! Cheers, Robb.
Re: alix 2d13 + 6.4: should it work?
"Theo de Raadt" writes: > First time you need to > > stty com0 > set tty com0 > > then you can boot. > > The installer will remember this for next time, but our kernel does not > know the speed so early on. Strictly speaking the installer _asks_ you if you would like it to remember the setting for next time, which I find to be a nice touch as I may want to install a server using the serial console but run it without one. Matthew
Re: alix 2d13 + 6.4: should it work?
First time you need to stty com0 set tty com0 then you can boot. The installer will remember this for next time, but our kernel does not know the speed so early on. > Quick question, should the PC Engines ALIX 2D13 work with 6.4? Or is the > hardware too old? > > Or (perhaps more likely :-)) did I screw up the installation process > somehow? > > I created an install media (cf card) and boot functions but as the kernel > is loading, the system reboots: > > PC Engines ALIX.2 v0.99m > 640 KB Base Memory > 261120 KB Extended Memory > Waiting for HDD ... > > 01F0 Master 044A CF 8GB > Phys C/H/S 15538/16/63 Log C/H/S 974/255/63 LBA > Using drive 0, partition 3. > Loading... > probing: pc0 com0 com1 mem[640K 255M a20=on] > disk: hd0+ > >> OpenBSD/i386 BOOT 3.34 > boot> > cannot open hd0a:/etc/random.seed: No such file or directory > booting hd0a:/6.4/i386/bsd.rd: 3111423+1360896+3362824+0+454656 > [363995+98+289392+283301]=0x8ced6c > entry point at 0x2000d4 > PC Engines ALIX.2 v0.99m > 640 KB Base Memory > 261120 KB Extended Memory > Waiting for HDD ... > > > I did: > fetch https://cdn.openbsd.org/pub/OpenBSD/6.4/i386/install64.fs > dd if=/dev/random of=/dev/rsdd bs=512 count=256 iflag=fullblock > sync ; sync ; sync > dd if=/home/robb/Downloads/install64.fs of=/dev/rsdd bs=1M > sync ; sync ; sync > udisksctl power-off -b /dev/sdd > > The same hardware was previously running OpenBSD (5.6 I think) quite > happily. > > Cheers, > Robb. >
alix 2d13 + 6.4: should it work?
Quick question, should the PC Engines ALIX 2D13 work with 6.4? Or is the hardware too old? Or (perhaps more likely :-)) did I screw up the installation process somehow? I created an install media (cf card) and boot functions but as the kernel is loading, the system reboots: PC Engines ALIX.2 v0.99m 640 KB Base Memory 261120 KB Extended Memory Waiting for HDD ... 01F0 Master 044A CF 8GB Phys C/H/S 15538/16/63 Log C/H/S 974/255/63 LBA Using drive 0, partition 3. Loading... probing: pc0 com0 com1 mem[640K 255M a20=on] disk: hd0+ >> OpenBSD/i386 BOOT 3.34 boot> cannot open hd0a:/etc/random.seed: No such file or directory booting hd0a:/6.4/i386/bsd.rd: 3111423+1360896+3362824+0+454656 [363995+98+289392+283301]=0x8ced6c entry point at 0x2000d4 PC Engines ALIX.2 v0.99m 640 KB Base Memory 261120 KB Extended Memory Waiting for HDD ... I did: fetch https://cdn.openbsd.org/pub/OpenBSD/6.4/i386/install64.fs dd if=/dev/random of=/dev/rsdd bs=512 count=256 iflag=fullblock sync ; sync ; sync dd if=/home/robb/Downloads/install64.fs of=/dev/rsdd bs=1M sync ; sync ; sync udisksctl power-off -b /dev/sdd The same hardware was previously running OpenBSD (5.6 I think) quite happily. Cheers, Robb.