Re: [ovs-dev] How to set QoS for VM egress traffic on tunnel mode
On Wed, Nov 22, 2017 at 09:50:54AM +, 王志克 wrote: > Hi All, > > I want to set QoS with guide from below link “egress traffic shaping”, but do > not know how for tunnel mode. > http://docs.openvswitch.org/en/latest/faq/qos/ > > My scenario: > > I have several VM ports, and several VxLan ports in br0, and there is one > seprate eth0 port (not in br0), which is the underlay port of Vxlan port. > Currently I add rule to match VM traffic to certain Vxlan port, and all these > vxlan ports would go out through eth0. > > Now I want to enable egress traffic shaping, eg: > VM1 goes out with min_rate=10M, max_rate=100M. > VM2 goes out with min_rate=50M, max_rate=200M. > > In the given example in http://docs.openvswitch.org/en/latest/faq/qos/ > chapter “egress traffic shaping”, it directly uses the physical port. But in > tunnel case, I can NOT specify the physical port directly. > So how to configrue egress traffic shaping in tunnel case? Appreciate some > example configruation. Thanks. You would want to configure shaping on the physical output port in this case. ___ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev
Re: [ovs-dev] How to set QoS for VM egress traffic on tunnel mode
Hi, The topo can be same as below example. http://docs.openvswitch.org/en/latest/howto/tunneling/?highlight=tunnel I just wonder in such configuration how the egress shaping can be configured for different VM. Or the QoS does not work for tunnel case? Appreciate help. BR, Wang Zhike From: 王志克 Sent: Wednesday, November 22, 2017 5:51 PM To: ovs-dev@openvswitch.org; ovs-disc...@openvswitch.org Subject: How to set QoS for VM egress traffic on tunnel mode Hi All, I want to set QoS with guide from below link “egress traffic shaping”, but do not know how for tunnel mode. http://docs.openvswitch.org/en/latest/faq/qos/ My scenario: I have several VM ports, and several VxLan ports in br0, and there is one seprate eth0 port (not in br0), which is the underlay port of Vxlan port. Currently I add rule to match VM traffic to certain Vxlan port, and all these vxlan ports would go out through eth0. Now I want to enable egress traffic shaping, eg: VM1 goes out with min_rate=10M, max_rate=100M. VM2 goes out with min_rate=50M, max_rate=200M. In the given example in http://docs.openvswitch.org/en/latest/faq/qos/ chapter “egress traffic shaping”, it directly uses the physical port. But in tunnel case, I can NOT specify the physical port directly. So how to configrue egress traffic shaping in tunnel case? Appreciate some example configruation. Thanks. Br, Wang Zhike ___ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev
[ovs-dev] How to set QoS for VM egress traffic on tunnel mode
Hi All, I want to set QoS with guide from below link “egress traffic shaping”, but do not know how for tunnel mode. http://docs.openvswitch.org/en/latest/faq/qos/ My scenario: I have several VM ports, and several VxLan ports in br0, and there is one seprate eth0 port (not in br0), which is the underlay port of Vxlan port. Currently I add rule to match VM traffic to certain Vxlan port, and all these vxlan ports would go out through eth0. Now I want to enable egress traffic shaping, eg: VM1 goes out with min_rate=10M, max_rate=100M. VM2 goes out with min_rate=50M, max_rate=200M. In the given example in http://docs.openvswitch.org/en/latest/faq/qos/ chapter “egress traffic shaping”, it directly uses the physical port. But in tunnel case, I can NOT specify the physical port directly. So how to configrue egress traffic shaping in tunnel case? Appreciate some example configruation. Thanks. Br, Wang Zhike ___ dev mailing list d...@openvswitch.org https://mail.openvswitch.org/mailman/listinfo/ovs-dev