Re: [time-nuts] Looking for info on Austron 1100-1 OXCO

[Dave M]

Thanks for the info, Roger

Dave M

Roger Tilsley wrote:

Greetings Dave,

While I do not know the Austron 1100 oscillators, I have experience
of Austron 1120 oscillators.  I suspect the 1100 and 1120 are very
similar.  I am sending a data sheet for the 1120 and an operating
spec for the 1120 L.  Note that the 1120Ls does not have varicap fine
frequency trimming.  Austron were consistent with the pin-out for IO
plug-in oscillators.  The 1120s have soldered base to can joints and
I have successfully take them apart for repair (extra capacitance!). 
The 1120s are very good.   


Regards,
Roger T.


On Fri, 30 Jun 2017 12:14:14 -0500, "Dave M"
 wrote: 


Does anyone have any data on the Austron 1100-1 5MHz OXCO?  Pinout &
specs would be great.

Thanks!
Dave M
___


___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

[time-nuts] Looking for info on Austron 1100-1 OXCO

[Dave M]

Does anyone have any data on the Austron 1100-1 5MHz OXCO?  Pinout & specs 
would be great.

Thanks!
Dave M 
___
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.