[Bug 1864132] Re: g_ether missing eem support
** This bug is no longer a duplicate of bug 1861070 Raspberry Pi 4B: USB OTG is not working ** Package changed: linux-raspi2 (Ubuntu) => linux-raspi (Ubuntu) ** Also affects: linux-raspi (Ubuntu Focal) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1864132 Title: g_ether missing eem support To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1864132/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1880835] Re: pulse audio hangs in kernel call
I have been using it for a while now and I manage to reproduce the problem with the mainline kernel : uname ouput: Linux DEM-RSZABO-U20 5.7.0-050700rc7-generic #202005242331 SMP Sun May 24 23:33:19 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux dmesg output: [ 172.040868] firewire_ohci :27:00.0: enabling device ( -> 0002) [ 172.045220] usb 7-1.4.2: New USB device found, idVendor=0b0e, idProduct=1113, bcdDevice= 3.04 [ 172.045221] usb 7-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 172.045222] usb 7-1.4.2: Product: Jabra Engage 75 [ 172.045223] usb 7-1.4.2: Manufacturer: GN Audio A/S [ 172.045224] usb 7-1.4.2: SerialNumber: 033DCCC2D80F [ 172.098317] firewire_ohci :27:00.0: isochronous cycle inconsistent [ 172.098355] firewire_ohci :27:00.0: added OHCI v1.10 device as card 1, 8 IR + 8 IT contexts, quirks 0x0, physUB [ 172.216832] input: GN Audio A/S Jabra Engage 75 as /devices/pci:00/:00:1c.0/:04:00.0/:05:01.0/:07:00.0/:08:02.0/:0b:00.0/usb7/7-1/7-1.4/7-1.4.2/7-1.4.2:1.3/0003:0B0E:1113.0013/input/input52 [ 172.274621] jabra 0003:0B0E:1113.0013: input,hiddev2,hidraw7: USB HID v1.11 Device [GN Audio A/S Jabra Engage 75] on usb-:0b:00.0-1.4.2/input3 [ 172.518897] igb :0c:00.0 ens1: igb: ens1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 172.618312] firewire_core :27:00.0: created device fw0: GUID 000a2702007351d1, S800 [ 172.625488] firewire_core :27:00.0: created device fw1: GUID 00022e020007, S400 [ 172.625489] firewire_core :27:00.0: phy config: new root=ffc0, gap_count=5 [ 172.626660] IPv6: ADDRCONF(NETDEV_CHANGE): ens1: link becomes ready [ 172.739267] thunderbolt 0-1: new device found, vendor=0x5a device=0xde21 [ 172.739268] thunderbolt 0-1: Other World Computing Thunderbolt 3 Dock [ 173.131591] thunderbolt 0-101: new device found, vendor=0x1e device=0x1 [ 173.131592] thunderbolt 0-101: LG Electronics 34UM95 [ 173.571435] thunderbolt 0-10101: new device found, vendor=0x1 device=0x8004 [ 173.571436] thunderbolt 0-10101: Apple, Inc. Thunderbolt to FireWire Adapter [ 178.864484] ACPI: button: The lid device is not compliant to SW_LID. [ 182.938764] logitech-hidpp-device 0003:046D:406D.000E: HID++ 4.5 device connected. [ 183.180829] logitech-hidpp-device 0003:046D:406D.000E: multiplier = 8 [ 484.390178] INFO: task pulseaudio:2213 blocked for more than 120 seconds. [ 484.390181] Tainted: P OE 5.7.0-050700rc7-generic #202005242331 [ 484.390182] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 484.390182] pulseaudio D0 2213 2190 0x4120 [ 484.390184] Call Trace: [ 484.390188] __schedule+0x2dd/0x780 [ 484.390190] ? dma_pte_clear_level+0x148/0x1a0 [ 484.390191] schedule+0x55/0xc0 [ 484.390192] schedule_timeout+0x207/0x2f0 [ 484.390194] ? at_context_transmit+0x66/0x1a0 [firewire_ohci] [ 484.390195] wait_for_completion+0x94/0x100 [ 484.390198] fw_run_transaction+0xdc/0x110 [firewire_core] [ 484.390200] ? fw_core_handle_bus_reset+0x470/0x470 [firewire_core] [ 484.390202] ? free_iova_fast+0x18/0x30 [ 484.390204] ? close_transaction+0x110/0x110 [firewire_core] [ 484.390205] ? free_one_page+0xb5/0x490 [ 484.390206] ? transmit_phy_packet_callback+0x20/0x20 [firewire_core] [ 484.390209] snd_fw_transaction+0xbc/0x110 [snd_firewire_lib] [ 484.390210] ? avc_general_get_plug_info+0x100/0x100 [snd_firewire_lib] [ 484.390212] pcr_modify+0x65/0x100 [snd_firewire_lib] [ 484.390213] cmp_connection_break+0x37/0x50 [snd_firewire_lib] [ 484.390215] snd_oxfw_stream_start_duplex+0x1f0/0x2e0 [snd_oxfw] [ 484.390217] ? wait_woken+0x80/0x80 [ 484.390218] pcm_capture_prepare+0x26/0x50 [snd_oxfw] [ 484.390221] snd_pcm_do_prepare+0x2c/0x50 [snd_pcm] [ 484.390223] snd_pcm_action_single+0x3c/0x80 [snd_pcm] [ 484.390225] snd_pcm_action_nonatomic+0x6e/0x80 [snd_pcm] [ 484.390226] snd_pcm_prepare+0x6a/0x90 [snd_pcm] [ 484.390228] snd_pcm_common_ioctl+0xb3b/0xed0 [snd_pcm] [ 484.390230] ? vm_mmap_pgoff+0xe6/0x120 [ 484.390232] snd_pcm_ioctl+0x27/0x40 [snd_pcm] [ 484.390233] ksys_ioctl+0x9d/0xd0 [ 484.390235] __x64_sys_ioctl+0x1a/0x20 [ 484.390236] do_syscall_64+0x57/0x1d0 [ 484.390237] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 484.390238] RIP: 0033:0x7fde5b6e037b [ 484.390241] Code: Bad RIP value. [ 484.390241] RSP: 002b:7ffd5367a8f8 EFLAGS: 0206 ORIG_RAX: 0010 [ 484.390242] RAX: ffda RBX: 561a0e3352f0 RCX: 7fde5b6e037b [ 484.390243] RDX: 0001 RSI: 4140 RDI: 0047 [ 484.390243] RBP: 561a0e348840 R08: R09: 1000 [ 484.390243] R10: 0004 R11: 0206 R12: ffda [ 484.390244] R13: 7ffd5367ad20 R14: R15: 7ffd5367aab0 [ 484.390287] INFO: task skypeforlinux:8637 blocked for more than 120 seconds. [ 484.390287] Tainted: P
[Bug 1884100] Re: Qualcomm Atheros QCA6174 802.11ac fails in linux-firmware 1.187
@Diogo, 1. Ask @patola to login on your computer and run apport, or 2. Ask @patola to instruct you to file a new bug by your own and mark this issue INVALID. Consider we may need you to run more commands to collect more info and/or try something, taking 2) should be the most convenient. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884100 Title: Qualcomm Atheros QCA6174 802.11ac fails in linux-firmware 1.187 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1884100/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883898] Re: version 3.20.6 turns off plugin requirement for most printers
@ Chris York, thank you for the link! Unfortunately, the issue I report in this ticket is a different from the issue in the link. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883898 Title: version 3.20.6 turns off plugin requirement for most printers To manage notifications about this bug go to: https://bugs.launchpad.net/hplip/+bug/1883898/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1872803] Re: VM reboots using qemu and kvm with ovmf
FYI - bug 1882774 solves some issues on GCE/Azure in regard to nesting KVM. If you can you might try these preliminary builds from there if they help your case in any way. ** Package changed: kvm (Ubuntu) => qemu (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1872803 Title: VM reboots using qemu and kvm with ovmf To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1872803/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884480] [NEW] No error message when upgrade to 20.04 does not work due to outdated packages
Public bug reported: I'm running Ubuntu 19.10 and got a message prompting me to upgrade to 20.04. I clicked the "Upgrade now" (or something similar) button and then nothing happens at all. Looking in the journal, I see: jun 22 08:19:00 grubby check-new-release-gtk[27508]: Checking for a new Ubuntu release jun 22 08:19:00 grubby check-new-release-gtk[27508]: Please install all available updates for your release before upgrading. jun 22 08:19:00 grubby systemd[4266]: update-notifier-release.service: Main process exited, code=exited, status=1/FAILURE jun 22 08:19:00 grubby systemd[4266]: update-notifier-release.service: Failed with result 'exit-code'. jun 22 08:19:00 grubby systemd[4266]: Failed to start Notification regarding a new release of Ubuntu. I suspect this is the reason nothing happens, but that should really be reported to the user graphically, rather than just in the journal. ProblemType: Bug DistroRelease: Ubuntu 19.10 Package: ubuntu-release-upgrader-core 1:19.10.15.4 ProcVersionSignature: Ubuntu 5.3.0-59.53-generic 5.3.18 Uname: Linux 5.3.0-59-generic x86_64 ApportVersion: 2.20.11-0ubuntu8.9 Architecture: amd64 CrashDB: ubuntu CurrentDesktop: GNOME Date: Mon Jun 22 08:21:57 2020 InstallationDate: Installed on 2019-03-15 (464 days ago) InstallationMedia: Ubuntu 18.10 "Cosmic Cuttlefish" - Release amd64 (20181017.3) PackageArchitecture: all SourcePackage: ubuntu-release-upgrader Symptom: ubuntu-release-upgrader UpgradeStatus: Upgraded to eoan on 2020-01-30 (143 days ago) VarLogDistupgradeTermlog: ** Affects: ubuntu-release-upgrader (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug dist-upgrade eoan third-party-packages -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884480 Title: No error message when upgrade to 20.04 does not work due to outdated packages To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1884480/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882630] Re: [amdgpu] Plymouth boot animation (dots) drawn over the desktop wallpaper
OK, the video in comment #9 is bug 1884430 and the video in comment #11 is bug 1884428. To avoid confusion I will delete them from this bug. ** Attachment removed: "Bug 🐞 2" https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1882630/+attachment/5385614/+files/VID-20200620-WA0001.mp4 ** Attachment removed: "Bug" https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1882630/+attachment/5385616/+files/VID-20200620-WA0002.mp4 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882630 Title: [amdgpu] Plymouth boot animation (dots) drawn over the desktop wallpaper To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1882630/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884472] Re: a2jmidid checkbox do not work correctly
Based on Len's response, this is not a bug, but more of a misconfiguration that may be mitigated by a future feature, and a support request. Marking as invalid as support requests are not appropriate on a bug tracker. ** Changed in: ubuntustudio-controls (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884472 Title: a2jmidid checkbox do not work correctly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntustudio-controls/+bug/1884472/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884110] Re: Enable ZFS for Raspberry Pi arm64
** Description changed: - Placeholder + [Impact] + + The ZFS module is currently not available in the raspi kernel and + compiling the dkms module takes ages. ZFS is supported on >4GB 64-bit + Raspberry Pis and the module should therefore be provided by the kernel + package. + + [Test Case] + + $ modinfo zfs + modinfo: ERROR: Module zfs not found. + + [Regression Potential] + + Low. It's 'just' a couple of new modules and users can already build and + use them today using the zfs-dkms package. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884110 Title: Enable ZFS for Raspberry Pi arm64 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1884110/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883493] Re: amdgpu hangs from time to time with *ERROR* Waiting for fences timed out!
After running ereything with AMD_DEBUG=nongg, the "Waiting for fences" seems to be mostly gone, and I now get sdma0 timeouts. So this seems to be part of the gereral cluster of failures that seem to plague the linux navi drivers since the beginning. Jun 22 07:24:43 alhazen kernel: [ 748.740480] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring gfx_0.0.0 timeout, signaled seq=134116, emitted seq=134118 Jun 22 07:24:43 alhazen kernel: [ 748.740549] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process Xorg pid 3589 thread Xorg:cs0 pid 3591 Jun 22 07:24:43 alhazen kernel: [ 748.740552] [drm] GPU recovery disabled. Jun 22 07:25:28 alhazen kernel: [ 794.386634] GpuWatchdog[5797]: segfault at 0 ip 556cdabbccb9 sp 7f6a540a06c0 error 6 in chrome[556cd6a4e000+7095000] Jun 22 07:25:28 alhazen kernel: [ 794.386642] Code: 00 79 09 48 8b 7d c0 e8 d5 14 2b fc c7 45 c0 aa aa aa aa 0f ae f0 41 8b 84 24 e0 00 00 00 89 45 c0 48 8d 7d c0 e8 b7 31 e9 fb 04 25 00 00 00 00 37 13 00 00 48 83 c4 38 5b 41 5c 41 5d 41 5e Jun 22 07:25:38 alhazen kernel: [ 804.548718] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* ring sdma0 timeout, signaled seq=29322, emitted seq=29326 Jun 22 07:25:38 alhazen kernel: [ 804.548788] [drm:amdgpu_job_timedout [amdgpu]] *ERROR* Process information: process pid 0 thread pid 0 Jun 22 07:25:38 alhazen kernel: [ 804.548791] [drm] GPU recovery disabled. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883493 Title: amdgpu hangs from time to time with *ERROR* Waiting for fences timed out! To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883493/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883880] Re: fix non-8-bit x86 displacements breaking AVX512 builds on Bionic
Tested in Bionic Container: no PPA: root@b:~# echo "vmovaps 0x40(,%rax,1),%zmm0" | as --64 -o avx.o && objdump -d avx.o | grep vmovaps 0: 62 f1 7c 48 28 04 05vmovaps 0x1(,%rax,1),%zmm0 with PPA: root@b:~# echo "vmovaps 0x40(,%rax,1),%zmm0" | as --64 -o avx.o && objdump -d avx.o | grep vmovaps 0: 62 f1 7c 48 28 04 05vmovaps 0x40(,%rax,1),%zmm0 Seems to work as intended -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883880 Title: fix non-8-bit x86 displacements breaking AVX512 builds on Bionic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/1883880/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884255] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884255 Title: [AMD/ATI] SBx00 Azalia (Intel HDA) Audio Ubuntu 20.04 not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884255/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883880] Re: fix non-8-bit x86 displacements breaking AVX512 builds on Bionic
A few dep8 tests failed in the sniff, but all of them are existing known overrides in Bionic: ubuntu-release:9:force-badtest dh-ada-library/6.12 ubuntu-release:18:force-badtest lintian/2.5.81ubuntu1 pitti:2:force-badtest rpmlint/1.9-6 ubuntu-sru:17:force-badtest snapcraft/2.43.1+18.04/amd64 snapcraft/2.43.1+18.04/i386 ubuntu-sru:20:force-badtest snapcraft/2.43.1+18.04/armhf snapcraft/2.43.1+18.04/arm64 ubuntu-release:90:force-badtest linux-hwe/all ubuntu-release:91:force-badtest linux-hwe-edge/all So this should be good as-is, but needs Doko to sign-off and sponsor with the experience of potential side effects of a binutils update. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883880 Title: fix non-8-bit x86 displacements breaking AVX512 builds on Bionic To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/binutils/+bug/1883880/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884454] Re: [RTL8723BE] bluetooth range
** Tags added: hwe-bluetooth -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884454 Title: [RTL8723BE] bluetooth range To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884454/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884455] Re: pulseaudio creates /root/.config/pulse/ before zfs-mount.service can mount the /root dataset
The existence of a file in /root and also: PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. both suggest that your pulseaudio daemon is running in system-wide mode when it shouldn't. Please look in /etc/pulse/daemon.conf and make sure you DO NOT have something like: daemonize = yes ** Changed in: pulseaudio (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884455 Title: pulseaudio creates /root/.config/pulse/ before zfs-mount.service can mount the /root dataset To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1884455/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884437] Re: Windows are resized and reordered upon resume from lock or suspend
The XorgLog files seem to show at least one of the monitors being redetected, like it was unplugged and replugged. If Xorg thinks that's happening then yes windows would move to one screen. Please try a different DisplayPort cable. Also, please check that your gnome-shell process ID is the same before and after lock/suspend, by running: pidof gnome-shell both before and after. ** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) ** Changed in: gnome-shell (Ubuntu) Status: New => Incomplete ** Tags added: multimonitor -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884437 Title: Windows are resized and reordered upon resume from lock or suspend To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1884437/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884431] Re: unity desktop in shell desktop no option for free icons move to desktop
** Package changed: gnome-shell (Ubuntu) => unity (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884431 Title: unity desktop in shell desktop no option for free icons move to desktop To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/unity/+bug/1884431/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884396] Re: Ubuntu freezing intermittently
Please: 1. Run the 'Extensions' app and check you don't have any non-Ubuntu extensions enabled. If you do then please turn them off. 2. Immediately after the next freeze please run: journalctl -b0 > journal.txt and then attach the resulting file here. 3. Also leave 'top' running in a Terminal window and tell us if any process is using high CPU, particularly around the time of a freeze. ** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) ** Changed in: gnome-shell (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884396 Title: Ubuntu freezing intermittently To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1884396/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1546556] Re: Dropping privileges in openvswitch-switch via --user is incompatible with --dpdk
Old bug update, this works as-is. You can run as non-root - the old need for socket ownership also vanished due to the swicth to vhostuserclient. To the extend of what I wanted this would work, although it might have some rough edges left to configure it properly. (I'm unsure what the charms do these days) ** Changed in: dpdk (Ubuntu) Status: Triaged => Fix Released ** Changed in: openvswitch-dpdk (Ubuntu) Status: Triaged => Fix Released ** Also affects: charm-neutron-openvswitch Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1546556 Title: Dropping privileges in openvswitch-switch via --user is incompatible with --dpdk To manage notifications about this bug go to: https://bugs.launchpad.net/charm-neutron-openvswitch/+bug/1546556/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1492532] Re: 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
@Avramescu, the fix mentioned in the bug description has been landed to v4.4-rc1 as https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=6cafcd959599d91d0fa4615feae7f1e7ab407c4b and is included in every Ubuntu series after. I'm marking this issue as FIXRELEASED. Please file a new bug with `sudo apport-bug linux` so that we may have an investigation there. ** Changed in: linux (Ubuntu) Status: Triaged => Fix Released ** Tags added: hwe-bluetooth -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1492532 Title: 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1492532/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1546556] Re: Dropping privileges in openvswitch-switch via --user is incompatible with --dpdk
Added a "neutron-openvswitch charm" task so that we can think if we want to test if that could really work non-root (or does already) and if we would want some work there. Functionally (as mentioned above) everything should be there nowadays. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1546556 Title: Dropping privileges in openvswitch-switch via --user is incompatible with --dpdk To manage notifications about this bug go to: https://bugs.launchpad.net/charm-neutron-openvswitch/+bug/1546556/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884395] Re: GIMP crashes X-Server when mouse is first used after program launch
*** This bug is a duplicate of bug 1733292 *** https://bugs.launchpad.net/bugs/1733292 Looks like bug 1733292 ** This bug has been marked a duplicate of bug 1733292 Xorg crashed with SIGSEGV in point_on_screen from miPointerSetPosition from positionSprite from positionSprite from fill_pointer_events -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884395 Title: GIMP crashes X-Server when mouse is first used after program launch To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1884395/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884384] Re: in high contrast mode the calendar display uncomfortable
I can't see a problem on my machine. Can you attach a screenshot or photo showing what you mean? ** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) ** Changed in: gnome-shell (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884384 Title: in high contrast mode the calendar display uncomfortable To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1884384/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882930] Re: focal/linux-raspi: Upstream raspberrypi patchset 2020-06-10
** Description changed: Upstream raspberrypi patchset 2020-06-10 Ported from the following raspberrypi branch: rpi-5.4.y from https://github.com/raspberrypi/linux.git w1_therm: remove redundant assignments to variable ret w1_therm: Free the correct variable w1_therm: adding bulk read support to trigger multiple conversion on bus w1_therm: adding alarm sysfs entry w1_therm: optimizing temperature read timings w1_therm: adding eeprom sysfs entry w1_therm: adding resolution sysfs entry w1_therm: adding ext_power sysfs entry w1_therm: fix reset_select_slave during discovery w1_therm: adding code comments and code reordering overlays: Update upstream overlays after vc4-kms-v3d change overlays: i2c-gpio: Avoid open-drain warnings Revert "overlays: gpio-keys: Avoid open-drain warnings" snd_bcm2835: disable HDMI audio when vc4 is used (#3640) vc4: cec: Restore cec physical address on reconnect staging: vchiq_arm: Use g_dma_dev for dma_unmap_sg vc4: Set driver_name for card configs: Add SND_SOC_MAX98357A=m Add Micro Crystal RV-1805 to i2c-rtc overlays media: bcm2835-isp: fix bytes per line calculations for some image formats overlays: i2c-rtc-gpio: Fix trickle-resistor-ohms param net: rtl8192cu: fix gcc misleading whitespace warning overlays: Add spi0 overlay to support sc16is752 overlays: gpio-shutdown: Add information for Raspberry Pi 1 Model B rev 1 overlays: gpio-shutdown: Add information for SysV init / inittab overlays: i2c-rtc: Fix trickle-resistor-ohms param brcmfmac: BCM43436 needs dedicated firmware configs: Build HWMON core into kernel configs: Switch to upstream thermal sensor for RPi 4 - BCM2711_THERMAL ARM: dts: bcm2711-rpi: Remove downstream thermal sensor node Revert "thermal: brcmstb_thermal: Add BCM2838 support" Revert "thermal: brcmstb_thermal: Correct SoC name" ARM: configs: Build BCM2711 thermal as module ARM: dts: bcm2711: Enable thermal thermal: Add BCM2711 thermal driver dt-bindings: Add Broadcom AVS RO thermal media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1 - Revert "zswap: Uncross module parameter setting functions" ARM: dts: Update for new VCHIQ BCM2711 DMA support staging: vchiq_arm: Clean up 40-bit DMA support media: i2c: imx477: Return correct result on sensor id verification drm/vc4: Add FKMS as an acceptable node for dma ranges. drm/vc4: Adopt the dma configuration from the HVS or V3D component configs: Add ZSWAP=y, ZBUD=m, Z3FOLD=m zswap: Defer zswap initialisation - zswap: Uncross module parameter setting functions media: bcm2835-unicam: Retain packing information on G_FMT Switch to snd_soc_dai_set_bclk_ratio overlays: Fix audio parameter of vc4-kms-v3d configs: Restore missing NF_TABLES settings staging:vc04_services: bcm2835-camera: Request headers with I-frame staging:vc04_services: bcm2835-codec: Avoid fragmenting buffers staging:vc04_services: bcm2835-codec: Request headers with I-frame staging: vc04_services: mmal-vchiq: Update parameters list drm/vc4: Fix VIC usage with Broadcast RGB sc16is7xx: Fix for hardware flow control media: bcm2835-unicam: Always service interrupts configs: Use the upstream cpufreq driver configs: Include the firmware-clocks driver ARM: dts: Enable firmware-clocks on all Pis defconfig: Add CMA and system dma-heaps to the config dma-heap: Make the symbol 'dma_heap_ioctl_cmds' static dma-buf: fix resource leak on -ENOTTY error return path dma-buf: heaps: Remove redundant heap identifier from system heap name dma-buf: heaps: Use _IOCTL_ for userspace IOCTL identifier kselftests: Add dma-heap test dma-buf: heaps: Add CMA heap to dmabuf heaps dma-buf: heaps: Add system heap to dmabuf heaps dma-buf: heaps: Add heap helpers dma-buf: Add dma-buf heaps framework udmabuf: fix dma-buf cpu access udmabuf: implement begin_cpu_access/end_cpu_access hooks udmabuf: separate out creating/destroying scatter-table udmabuf: add a pointer to the miscdevice in dma-buf private data udmabuf: use cache_sgt_mapping option udmabuf: Remove deleted map/unmap handlers. configs: Add imx477 sensor driver to all Raspberry Pi defconfigs media: i2c: imx477: Add support for adaptive frame control media: i2c: Add driver for Sony IMX477 sensor dtoverlays: Add IMX477 sensor overlay dt-bindings: media: i2c: Add IMX477 CMOS sensor binding raspberrypi: dts: Switch to discrete ALSA devices overlays: Move "fixed-clock" nodes to the root overlays: tc358743: Use intra-overlay fragments + bcm2835-dma: Add proper 40-bit DMA support + clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks + drm/vc4: Fix HDMI mode validation + gpiolib: Don't prevent IRQ usage of output GPIOs + Revert "gpiolib: Don't prevent IRQ usage of output GPIOs" + Revert "net: bcmgenet: Workaround for Pi 4B network issue" ** Description changed: Upstream raspberrypi patchset 2020-06-10 Ported from
[Bug 1884361] Re: User icon not updated in login screen
Please check that the image file is world-readable. You can do that in a shell by running: chmod 644 YOURFILE or in Files: Properties > Permissions > Others: Access = Read-only ** Package changed: xorg (Ubuntu) => ubuntu ** Changed in: ubuntu Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884361 Title: User icon not updated in login screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1884361/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884378] Re: Text doesn't get clipped when too long
** Tags added: focal ** Summary changed: - Text doesn't get clipped when too long + Applications > Permission & Access text doesn't get clipped when too long ** Changed in: gnome-control-center (Ubuntu) Importance: Undecided => Low -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884378 Title: Applications > Permission & Access text doesn't get clipped when too long To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1884378/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884472] Re: a2jmidid checkbox do not work correctly
The default setting for jackdbus for midi is none, not raw. However running any other jackdbus startup utility in the past will create ~/.config/jack/conf.xml. An upgrade from to 19.10 to 20.04 will not reset that file as it is not an installed file. That said, because controls sets all controls it needs to every time it starts and starting jackdbus rewrites that file, future versions of studio-controls will remove that file before starting to avoid mis- settings made by other utilities. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884472 Title: a2jmidid checkbox do not work correctly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntustudio-controls/+bug/1884472/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884288] Re: [LapBook Pro] Touchpad sometimes does not work when machine is restarted
Please uninstall 'xserver-xorg-input-synaptics' and then tell us if the problem still happens. If it does then please also: 1. Reboot 2. Run: journalctl -b0 > journal.txt and attach the resulting text file here. ** Summary changed: - Touchpad sometimes does not work when machine is restarted + [LapBook Pro] Touchpad sometimes does not work when machine is restarted ** Package changed: xorg (Ubuntu) => xserver-xorg-input-synaptics (Ubuntu) ** Changed in: xserver-xorg-input-synaptics (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884288 Title: [LapBook Pro] Touchpad sometimes does not work when machine is restarted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-input-synaptics/+bug/1884288/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884319] Re: Black Screen after switching user accounts
*** This bug is a duplicate of bug 1882857 *** https://bugs.launchpad.net/bugs/1882857 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 1882857, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 1882857 [amdgpu] [KDE] Black screen when switching users -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884319 Title: Black Screen after switching user accounts To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1884319/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884255] Re: [AMD/ATI] SBx00 Azalia (Intel HDA) Audio Ubuntu 20.04 not working
** Summary changed: - Audio Ubuntu 20.04 not working + [AMD/ATI] SBx00 Azalia (Intel HDA) Audio Ubuntu 20.04 not working ** Also affects: linux (Ubuntu) Importance: Undecided Status: New ** Changed in: pulseaudio (Ubuntu) Status: Incomplete => New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884255 Title: [AMD/ATI] SBx00 Azalia (Intel HDA) Audio Ubuntu 20.04 not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884255/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842238] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1842238 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842238 Title: [TGL]PMU support TGL uncore event counters To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1834420] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1834420 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1834420 Title: perf uncore PMU support for Idaville To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1834420/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1801002] Missing required logs.
This bug is missing log files that will aid in diagnosing the problem. While running an Ubuntu kernel (not a mainline or third-party kernel) please enter the following command in a terminal window: apport-collect 1801002 and then change the status of the bug to 'Confirmed'. If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'. This change has been made by an automated script, maintained by the Ubuntu Kernel Team. ** Changed in: linux (Ubuntu) Status: New => Incomplete ** Tags added: groovy -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1801002 Title: [ICL] Split Lock Disable To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1801002/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884249] Re: external USB mouse not working
Lsusb-t.txt seems to show no mouse is connected. So that's either a hardware problem or a kernel problem. Please try unplugging and replugging the mouse. Please also try a different mouse. ** Package changed: xorg (Ubuntu) => linux (Ubuntu) ** Changed in: linux (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884249 Title: external USB mouse not working To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884249/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842224] Re: [EHL] Adaptive PEBS
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842224 Title: [EHL] Adaptive PEBS To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842224/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842232] Re: [TGL] Enable RAPL driver for Tiger Lake
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842232 Title: [TGL] Enable RAPL driver for Tiger Lake To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842232/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842142] Re: [EHL][OSE] SPI implementation
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842142 Title: [EHL][OSE] SPI implementation To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842142/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842230] Re: [TGL] Enable SLP_S0_DEBUG debug facilities
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842230 Title: [TGL] Enable SLP_S0_DEBUG debug facilities To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842230/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842231] Re: [TGL] Enable intel_idle driver for Tiger Lake
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842231 Title: [TGL] Enable intel_idle driver for Tiger Lake To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842231/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884476] Re: /dev/kvm wrong group (plugdev) after upgrade to 20.04
** Description changed: After an upgrade from 19.10 to 20.04, virsh fails launching virtual machines with the following message: error: Failed to start domain testvm error: internal error: process exited while connecting to monitor: Could not access KVM kernel module: Permission denied 2020-06-22T04:09:33.931139Z qemu-system-x86_64: failed to initialize KVM: Permission denied Investigating further shown that /dev/kvm, which should be owned by root:kvm, is now owned by root:plugdev: crw-rw+ 1 root plugdev 10, 232 Jun 22 06:09 /dev/kvm Changing its group to kvm fixes the issue temporarily but the group owner comes back to plugdev after a reboot. /lib/udev/rules.d/50-udev-default.rules seem to have the right rule: KERNEL=="kvm", GROUP="kvm", MODE="0660", OPTIONS+="static_node=kvm" + Update: + + Actually, a lot of devices chgrp'd to plugdev probably shouldn't: + + crw-rw 1 root plugdev 10,58 Jun 21 07:34 acpi_thermal_rel + crw-r--r-- 1 root plugdev 10, 235 Jun 21 07:34 autofs + crw-rw 1 root plugdev 10,59 Jun 21 07:34 cpu_dma_latency + crw-rw 1 root plugdev 240, 0 Jun 21 07:34 drm_dp_aux0 + crw-rw 1 root plugdev 240, 1 Jun 21 07:34 drm_dp_aux1 + crw-rw 1 root plugdev 240, 2 Jun 21 07:34 drm_dp_aux2 + crw-rw 1 root plugdev 10,62 Jun 21 07:34 ecryptfs + crw-rw-rw- 1 root plugdev 1, 7 Jun 21 07:34 full + crw-rw-rw- 1 root plugdev 10, 229 Jun 21 07:34 fuse + crw-rw 1 root plugdev 241, 0 Jun 21 07:34 hidraw0 + crw-rw+ 1 root plugdev 241, 1 Jun 22 05:21 hidraw1 + crw-rw 1 root plugdev 10, 228 Jun 21 07:34 hpet + crw-rw 1 root plugdev 10, 183 Jun 21 07:34 hwrng + crw-rw 1 root plugdev 89, 0 Jun 21 07:34 i2c-0 + crw-rw 1 root plugdev 89, 1 Jun 21 07:34 i2c-1 + crw-rw 1 root plugdev 89,10 Jun 21 07:34 i2c-10 + crw-rw 1 root plugdev 89, 2 Jun 21 07:34 i2c-2 + crw-rw 1 root plugdev 89, 3 Jun 21 07:34 i2c-3 + crw-rw 1 root plugdev 89, 4 Jun 21 07:34 i2c-4 + crw-rw 1 root plugdev 89, 5 Jun 21 07:34 i2c-5 + crw-rw 1 root plugdev 89, 6 Jun 21 07:34 i2c-6 + crw-rw 1 root plugdev 89, 7 Jun 21 07:34 i2c-7 + crw-rw 1 root plugdev 89, 8 Jun 21 07:34 i2c-8 + crw-rw 1 root plugdev 89, 9 Jun 21 07:34 i2c-9 + crw-r--r-- 1 root plugdev 1,11 Jun 21 07:34 kmsg + crw-rw+ 1 root plugdev 10, 232 Jun 22 06:37 kvm + brw-rw 1 root plugdev 7, 0 Jun 21 07:34 loop0 + brw-rw 1 root plugdev 7, 1 Jun 21 07:34 loop1 + brw-rw 1 root plugdev 7,10 Jun 21 07:34 loop10 + brw-rw 1 root plugdev 7, 2 Jun 21 07:34 loop2 + brw-rw 1 root plugdev 7, 3 Jun 21 07:34 loop3 + brw-rw 1 root plugdev 7, 4 Jun 21 07:34 loop4 + brw-rw 1 root plugdev 7, 5 Jun 21 07:34 loop5 + brw-rw 1 root plugdev 7, 6 Jun 21 07:34 loop6 + brw-rw 1 root plugdev 7, 7 Jun 21 07:34 loop7 + brw-rw 1 root plugdev 7, 8 Jun 21 07:34 loop8 + brw-rw 1 root plugdev 7, 9 Jun 21 07:34 loop9 + crw-rw 1 root plugdev 10, 227 Jun 21 07:34 mcelog + crw-rw 1 root plugdev 239, 0 Jun 21 07:34 mei0 + crw-rw-rw- 1 root plugdev 1, 3 Jun 21 07:34 null + crw-rw 1 root plugdev 108, 0 Jun 21 07:34 ppp + crw-rw 1 root plugdev 10, 1 Jun 21 07:34 psaux + crw-rw 1 root plugdev 246, 0 Jun 21 07:34 ptp0 + crw-rw-rw- 1 root plugdev 1, 8 Jun 21 07:34 random + crw-rw-r--+ 1 root plugdev 10, 242 Jun 21 07:34 rfkill + crw-rw 1 root plugdev 249, 0 Jun 21 07:34 rtc0 + brw-rw 1 root plugdev 8, 1 Jun 21 07:34 sda1 + crw-rw 1 root plugdev 10, 231 Jun 21 07:34 snapshot + crw-rw 1 tss plugdev 10, 224 Jun 21 07:34 tpm0 + crw-rw 1 root plugdev 5, 3 Jun 21 07:34 ttyprintk + crw-rw 1 root plugdev 10, 223 Jun 21 07:34 uinput + crw-rw-rw- 1 root plugdev 1, 9 Jun 21 07:34 urandom + crw-rw 1 root plugdev 10,63 Jun 21 07:34 vga_arbiter + crw-rw 1 root plugdev 10, 238 Jun 21 07:40 vhost-net + crw-rw-rw- 1 root plugdev 1, 5 Jun 21 07:34 zero + + ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: qemu-kvm 1:4.2-3ubuntu6.2 ProcVersionSignature: Ubuntu 5.4.0-37.41-generic 5.4.41 Uname: Linux 5.4.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Mon Jun 22 06:05:05 2020 InstallationDate: Installed on 2019-06-10 (377 days ago) InstallationMedia: Xubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) KvmCmdLine: COMMAND STAT EUID RUID PIDPPID %CPU COMMAND Lsusb: - Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub - Bus 001 Device 004: ID 8087:0a2b Intel Corp. - Bus 001 Device 003: ID 0c45:6717 Microdia Integrated_Webcam_HD - Bus 001 Device 002: ID 1050:04
[Bug 1842238] Re: [TGL]PMU support TGL uncore event counters
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842238 Title: [TGL]PMU support TGL uncore event counters To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882609] Re: [EHL] turbostat support for Elkhart Lake
** Changed in: intel Status: New => Fix Committed ** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882609 Title: [EHL] turbostat support for Elkhart Lake To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1882609/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883620] Re: [ICX] Model specific change for Split Lock Disable support for ICX-D
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883620 Title: [ICX] Model specific change for Split Lock Disable support for ICX-D To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1883620/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842218] Re: [EHL] Enable intel_idle driver
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842218 Title: [EHL] Enable intel_idle driver To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842218/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1834420] Re: perf uncore PMU support for Idaville
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1834420 Title: perf uncore PMU support for Idaville To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1834420/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1834417] Re: EDAC driver support for Idaville
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1834417 Title: EDAC driver support for Idaville To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1834417/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883619] Re: [ICX] Support RAPL PMU for ICX
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883619 Title: [ICX] Support RAPL PMU for ICX To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1883619/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1842106] Re: [EHL][OSE] HS-UART implementation
254cc7743e84 4f912b898dc2 b4d0aac23e35 ** Changed in: intel Status: Confirmed => Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1842106 Title: [EHL][OSE] HS-UART implementation To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1842106/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883630] Re: [ICX]ICL/ICX Fast Short Rep Movs
** Changed in: intel Status: New => Fix Committed ** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883630 Title: [ICX]ICL/ICX Fast Short Rep Movs To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1883630/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1801002] Re: [ICL] Split Lock Disable
** Information type changed from Private to Public -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1801002 Title: [ICL] Split Lock Disable To manage notifications about this bug go to: https://bugs.launchpad.net/intel/+bug/1801002/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1492532] Re: 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
THis issue is also occurs on Ubuntu 20.04 Linux A320M-H 5.4.0-37-generic #41-Ubuntu SMP Wed Jun 3 18:57:02 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) The usb blueetooth dongle doesnt work in linux 5.x, in ubuntu broke settings -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1492532 Title: 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) To manage notifications about this bug go to: https://bugs.launchpad.net/linux/+bug/1492532/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884472] Re: a2jmidid checkbox do not work correctly
I have no issues connecting my MIDI hardware to any software and therefore cannot reproduce. Please note that development of this application is not done specifically for Ubuntu anymore and has become an upstream project as Studio Controls (https://github.com/ovenwerks/studio-controls). Because we cannot backport studio-controls into the Ubuntu repositories for Ubuntu 20.04, this is likely a bug, if it even is a bug (bugs are reproducible on all hardware), that is not going to get fixed until there is a new release of Studio Controls which would be backported into the Ubuntu Studio Backports PPA. In your case, it is likely you ran qjackctl at some point (NOT recommended) before running (Ubuntu) Studio Conrols. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884472 Title: a2jmidid checkbox do not work correctly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntustudio-controls/+bug/1884472/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882669] Re: Focal Azure instances crash with ftracetest in ubuntu_kernel_selftests and ubuntu_ftrace_smoke_test
Still affecting Azure 5.4.0-1017.17 ** Tags added: sru-20200608 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882669 Title: Focal Azure instances crash with ftracetest in ubuntu_kernel_selftests and ubuntu_ftrace_smoke_test To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-kernel-tests/+bug/1882669/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1495711] Re: df only shows one mountpoint
[Expired for coreutils (Ubuntu) because there has been no activity for 60 days.] ** Changed in: coreutils (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1495711 Title: df only shows one mountpoint To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/coreutils/+bug/1495711/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1874238] Re: Upgrading from Ubuntu 18.04 to 20.04 fails due to nodejs from unknown archive
[Expired for ubuntu-release-upgrader (Ubuntu) because there has been no activity for 60 days.] ** Changed in: ubuntu-release-upgrader (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1874238 Title: Upgrading from Ubuntu 18.04 to 20.04 fails due to nodejs from unknown archive To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1874238/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1873943] Re: Screen doesnt suspend/lock
[Expired for ukui-screensaver (Ubuntu) because there has been no activity for 60 days.] ** Changed in: ukui-screensaver (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1873943 Title: Screen doesnt suspend/lock To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ukui-screensaver/+bug/1873943/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884476] [NEW] /dev/kvm wrong group (plugdev) after upgrade to 20.04
Public bug reported: After an upgrade from 19.10 to 20.04, virsh fails launching virtual machines with the following message: error: Failed to start domain testvm error: internal error: process exited while connecting to monitor: Could not access KVM kernel module: Permission denied 2020-06-22T04:09:33.931139Z qemu-system-x86_64: failed to initialize KVM: Permission denied Investigating further shown that /dev/kvm, which should be owned by root:kvm, is now owned by root:plugdev: crw-rw+ 1 root plugdev 10, 232 Jun 22 06:09 /dev/kvm Changing its group to kvm fixes the issue temporarily but the group owner comes back to plugdev after a reboot. /lib/udev/rules.d/50-udev-default.rules seem to have the right rule: KERNEL=="kvm", GROUP="kvm", MODE="0660", OPTIONS+="static_node=kvm" ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: qemu-kvm 1:4.2-3ubuntu6.2 ProcVersionSignature: Ubuntu 5.4.0-37.41-generic 5.4.41 Uname: Linux 5.4.0-37-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Mon Jun 22 06:05:05 2020 InstallationDate: Installed on 2019-06-10 (377 days ago) InstallationMedia: Xubuntu 18.04.2 LTS "Bionic Beaver" - Release amd64 (20190210) KvmCmdLine: COMMAND STAT EUID RUID PIDPPID %CPU COMMAND Lsusb: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 004: ID 8087:0a2b Intel Corp. Bus 001 Device 003: ID 0c45:6717 Microdia Integrated_Webcam_HD Bus 001 Device 002: ID 1050:0406 Yubico.com Yubikey 4 U2F+CCID Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub MachineType: Dell Inc. Latitude 7490 ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-37-generic root=UUID=2641bf58-717e-4e37-9773-684bf140a1a2 ro quiet splash vt.handoff=7 SourcePackage: qemu UpgradeStatus: Upgraded to focal on 2020-06-19 (2 days ago) dmi.bios.date: 04/26/2019 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.9.3 dmi.board.name: 0KP0FT dmi.board.vendor: Dell Inc. dmi.board.version: A00 dmi.chassis.type: 10 dmi.chassis.vendor: Dell Inc. dmi.modalias: dmi:bvnDellInc.:bvr1.9.3:bd04/26/2019:svnDellInc.:pnLatitude7490:pvr:rvnDellInc.:rn0KP0FT:rvrA00:cvnDellInc.:ct10:cvr: dmi.product.family: Latitude dmi.product.name: Latitude 7490 dmi.product.sku: 081C dmi.sys.vendor: Dell Inc. ** Affects: qemu (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884476 Title: /dev/kvm wrong group (plugdev) after upgrade to 20.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1884476/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1851833] Re: [Sager Clevo notebook model PB50_70RF, RD, RC] Unable to adjust brightness of backlight
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1851833 Title: [Sager Clevo notebook model PB50_70RF,RD,RC] Unable to adjust brightness of backlight To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1851833/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1870279] Re: can't install the version 18.04
[Expired for ubuntu-release-upgrader (Ubuntu) because there has been no activity for 60 days.] ** Changed in: ubuntu-release-upgrader (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1870279 Title: can't install the version 18.04 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/+bug/1870279/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1874120] Re: package chromium-browser 80.0.3987.163-0ubuntu0.18.04.1 failed to install/upgrade: new chromium-browser package pre-installation script subprocess returned error exit status 1
[Expired for chromium-browser (Ubuntu) because there has been no activity for 60 days.] ** Changed in: chromium-browser (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1874120 Title: package chromium-browser 80.0.3987.163-0ubuntu0.18.04.1 failed to install/upgrade: new chromium-browser package pre-installation script subprocess returned error exit status 1 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1874120/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1871149] Re: False apt_pkg.CacheMismatchError
[Expired for python-apt (Ubuntu) because there has been no activity for 60 days.] ** Changed in: python-apt (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1871149 Title: False apt_pkg.CacheMismatchError To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/python-apt/+bug/1871149/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1867060] Re: no brightness control support on Aspire A715-72G
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1867060 Title: no brightness control support on Aspire A715-72G To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1867060/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1872515] Re: Nautilus lors de l'affichage de fichiers photos RAW crée des vignettes JPEG ce qui me semble inutile car les dossiers grossisse beaucoup.
[Expired for nautilus (Ubuntu) because there has been no activity for 60 days.] ** Changed in: nautilus (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1872515 Title: Nautilus lors de l'affichage de fichiers photos RAW crée des vignettes JPEG ce qui me semble inutile car les dossiers grossisse beaucoup. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/nautilus/+bug/1872515/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1874049] Re: Gnome-shell block
[Expired for gnome-shell (Ubuntu) because there has been no activity for 60 days.] ** Changed in: gnome-shell (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1874049 Title: Gnome-shell block To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1874049/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1874203] Re: SSD root Filesystem becomes read-only while in use
[Expired for Ubuntu because there has been no activity for 60 days.] ** Changed in: ubuntu Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1874203 Title: SSD root Filesystem becomes read-only while in use To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1874203/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1871590] Re: Kernel 5.3 fails to boot on Inspiron 15 3000 running Ubuntu 18.04 since 2020-03-22 update
[Expired for linux (Ubuntu) because there has been no activity for 60 days.] ** Changed in: linux (Ubuntu) Status: Incomplete => Expired -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1871590 Title: Kernel 5.3 fails to boot on Inspiron 15 3000 running Ubuntu 18.04 since 2020-03-22 update To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1871590/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884435] Re: Xorg freeze
*** This bug is a duplicate of bug 1872268 *** https://bugs.launchpad.net/bugs/1872268 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug 1872268, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) ** This bug has been marked a duplicate of bug 1872268 Gnome Shell completely freezes in Ubuntu 20.04 when clicking outside of app icon folders (when ubuntu-dock is loaded) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884435 Title: Xorg freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1884435/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1181666] Re: gnome-shell randomly blocks mouse clicks from working in app windows
Philipp, This bug is about only app windows not responding to clicks, not the shell itself. If you experience problems with parts of the shell not responding to clicks then please open a new bug by running: ubuntu-bug gnome-shell -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1181666 Title: gnome-shell randomly blocks mouse clicks from working in app windows To manage notifications about this bug go to: https://bugs.launchpad.net/gnome-shell/+bug/1181666/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884430] Re: ubuntu hangs
I suspect a lot of clicking issues should have been resolved by mutter 3.34, but you will need Ubuntu 20.04 to test that. Please do upgrade to 20.04 if you can. ** Tags removed: patch ** Summary changed: - ubuntu hangs + Gnome Shell not responding to mouse clicks (during force quit dialog) ** Description changed: - hangs many time a day + Gnome Shell not responding to mouse clicks (during force quit dialog) ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: xorg 1:7.7+19ubuntu7.1 ProcVersionSignature: Ubuntu 5.3.0-59.53~18.04.1-generic 5.3.18 Uname: Linux 5.3.0-59-generic x86_64 ApportVersion: 2.20.9-0ubuntu7.15 Architecture: amd64 CompositorRunning: None CurrentDesktop: ubuntu:GNOME Date: Sun Jun 21 18:34:08 2020 DistUpgraded: Fresh install DistroCodename: bionic DistroVariant: ubuntu ExtraDebuggingInterest: No GpuHangFrequency: Several times a week GpuHangReproducibility: Yes, I can easily reproduce it GpuHangStarted: Immediately after installing this version of Ubuntu GraphicsCard: - Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev c8) (prog-if 00 [VGA controller]) -Subsystem: Gigabyte Technology Co., Ltd Radeon RX Vega 11 [1458:d000] + Advanced Micro Devices, Inc. [AMD/ATI] Raven Ridge [Radeon Vega Series / Radeon Vega Mobile Series] [1002:15dd] (rev c8) (prog-if 00 [VGA controller]) + Subsystem: Gigabyte Technology Co., Ltd Radeon RX Vega 11 [1458:d000] MachineType: Gigabyte Technology Co., Ltd. A320M-S2H ProcEnviron: - LANGUAGE=en_IN:en - PATH=(custom, no user) - XDG_RUNTIME_DIR= - LANG=en_IN - SHELL=/bin/bash + LANGUAGE=en_IN:en + PATH=(custom, no user) + XDG_RUNTIME_DIR= + LANG=en_IN + SHELL=/bin/bash ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.3.0-59-generic root=UUID=38903ee5-fb7c-4faa-ac0c-0a499b16e531 ro quiet splash nomodeset vt.handoff=1 SourcePackage: xorg Symptom: display Title: Xorg freeze UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 08/08/2018 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: F23 dmi.board.asset.tag: Default string dmi.board.name: A320M-S2H-CF dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.asset.tag: Default string dmi.chassis.type: 3 dmi.chassis.vendor: Default string dmi.chassis.version: Default string dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrF23:bd08/08/2018:svnGigabyteTechnologyCo.,Ltd.:pnA320M-S2H:pvrDefaultstring:rvnGigabyteTechnologyCo.,Ltd.:rnA320M-S2H-CF:rvrx.x:cvnDefaultstring:ct3:cvrDefaultstring: dmi.product.family: Default string dmi.product.name: A320M-S2H dmi.product.sku: Default string dmi.product.version: Default string dmi.sys.vendor: Gigabyte Technology Co., Ltd. version.compiz: compiz N/A version.libdrm2: libdrm2 2.4.101-2~18.04.1 version.libgl1-mesa-dri: libgl1-mesa-dri 19.2.8-0ubuntu0~18.04.3 version.libgl1-mesa-glx: libgl1-mesa-glx 19.2.8-0ubuntu0~18.04.3 version.xserver-xorg-core: xserver-xorg-core N/A version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A version.xserver-xorg-video-ati: xserver-xorg-video-ati N/A version.xserver-xorg-video-intel: xserver-xorg-video-intel N/A version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau N/A ** Package changed: xorg (Ubuntu) => gnome-shell (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884430 Title: Gnome Shell not responding to mouse clicks (during force quit dialog) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1884430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884430] Re: Gnome Shell not responding to mouse clicks (during force quit dialog)
Also next time this bug occurs please: 1. Reboot. 2. Open a Terminal and run: journalctl -b-1 > prevboot.txt and then attach the resulting text file to this bug. ** Changed in: gnome-shell (Ubuntu) Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884430 Title: Gnome Shell not responding to mouse clicks (during force quit dialog) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1884430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884351] Re: Firmware bug - ACPI
Hi, we need to have more information when the problem occurs. That is, could you specify more about "can't boot without acpi=off"? At what stage does it hang? What's the contents of the screen at the moment? What would happen if yiu boot with "initcall_debug earlycon=efifb" (and don't add acpi=off)? ** Changed in: linux (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884351 Title: Firmware bug - ACPI To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884351/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1870971] Re: [amdgpu] Xubuntu 20.04 boots to black screen on Lenovo Ideapad L340-17API
** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1870971 Title: [amdgpu] Xubuntu 20.04 boots to black screen on Lenovo Ideapad L340-17API To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1870971/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1879434] Re: package linux-modules-extra-5.4.0-31-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-31-generic/kernel/drivers/media/usb/go7007/s2250.ko.dpkg-ne
*** This bug is a duplicate of bug 1883976 *** https://bugs.launchpad.net/bugs/1883976 ** This bug has been marked a duplicate of bug 1883976 package linux-modules-extra-5.4.0-37-generic (not installed) failed to install/upgrade: impossible de créer le fichier « /var/lib/dpkg/info/linux-modules-extra-5.4.0-37-generic.list-new »: Opération non permise -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1879434 Title: package linux-modules-extra-5.4.0-31-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-31-generic/kernel/drivers/media/usb/go7007/s2250.ko .dpkg-new': Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1879434/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1875797] Re: [MIR] oem-somerville-melisa-meta
** Changed in: oem-priority Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1875797 Title: [MIR] oem-somerville-melisa-meta To manage notifications about this bug go to: https://bugs.launchpad.net/oem-priority/+bug/1875797/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884474] Re: package linux-modules-extra-5.4.0-37-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko.dpkg-new':
** Tags removed: need-duplicate-check -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884474 Title: package linux-modules-extra-5.4.0-37-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko .dpkg-new': Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884474] Status changed to Confirmed
This change was made by a bot. ** Changed in: linux (Ubuntu) Status: New => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884474 Title: package linux-modules-extra-5.4.0-37-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko .dpkg-new': Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884474] [NEW] package linux-modules-extra-5.4.0-37-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko.dpkg-new
Public bug reported: Hello, did not install updates ProblemType: Package DistroRelease: Ubuntu 20.04 Package: linux-modules-extra-5.4.0-37-generic (not installed) ProcVersionSignature: Ubuntu 5.4.0-33.37-generic 5.4.34 Uname: Linux 5.4.0-33-generic x86_64 ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC1: vicente1908 F pulseaudio /dev/snd/controlC0: vicente1908 F pulseaudio CasperMD5CheckResult: skip Date: Sun Jun 21 22:12:46 2020 DuplicateSignature: package:linux-modules-extra-5.4.0-37-generic:(not installed) Unpacking linux-modules-extra-5.4.0-37-generic (5.4.0-37.41) ... dpkg: error processing archive /tmp/apt-dpkg-install-22nuuE/60-linux-modules-extra-5.4.0-37-generic_5.4.0-37.41_amd64.deb (--unpack): unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko.dpkg-new': Operation not permitted ErrorMessage: unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko.dpkg-new': Operation not permitted InstallationDate: Installed on 2020-06-01 (21 days ago) InstallationMedia: MachineType: Hewlett-Packard HP EliteDesk 800 G1 TWR ProcFB: 0 i915drmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-5.4.0-33-generic root=UUID=2a9fafe8-6819-4e8d-9839-c4c6e3794098 ro quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. Python3Details: /usr/bin/python3.8, Python 3.8.2, python3-minimal, 3.8.2-0ubuntu2 PythonDetails: N/A RelatedPackageVersions: grub-pc 2.04-1ubuntu26 RfKill: SourcePackage: linux StagingDrivers: r8188eu Title: package linux-modules-extra-5.4.0-37-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko.dpkg-new': Operation not permitted UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 06/10/2013 dmi.bios.vendor: Hewlett-Packard dmi.bios.version: L01 v02.05 dmi.board.asset.tag: MXL34013Y2 dmi.board.name: 18E4 dmi.board.vendor: Hewlett-Packard dmi.chassis.asset.tag: MXL34013Y2 dmi.chassis.type: 6 dmi.chassis.vendor: Hewlett-Packard dmi.modalias: dmi:bvnHewlett-Packard:bvrL01v02.05:bd06/10/2013:svnHewlett-Packard:pnHPEliteDesk800G1TWR:pvr:rvnHewlett-Packard:rn18E4:rvr:cvnHewlett-Packard:ct6:cvr: dmi.product.family: 103C_53307F G=D dmi.product.name: HP EliteDesk 800 G1 TWR dmi.product.sku: E3S99LT#ABM dmi.sys.vendor: Hewlett-Packard ** Affects: linux (Ubuntu) Importance: Undecided Status: Confirmed ** Tags: amd64 apport-package focal staging -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884474 Title: package linux-modules-extra-5.4.0-37-generic (not installed) failed to install/upgrade: unable to open '/lib/modules/5.4.0-37-generic/kernel/drivers/nfc/pn544/pn544_mei.ko .dpkg-new': Operation not permitted To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884474/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1874567] Re: [nvidia] Rotating secondary monitor to portrait fails, results in landscape
Hello folks. I experience this issue with my three monitor setup (two of which are vertical) using NVIDIA Drivers 440.82 on PopOS 20.04. Monitor layout works with xrandr/arandr and if I hand craft manitors.xml, configuration is preserved. I have posted my details here https://github.com/pop-os/pop/issues/933#issuecomment-643681670 But GUI doesn't work. Also after recovering from suspend layout explodes again. I would be glad to help with investigation, collecting logs, traces, etc (feel free to DM me). ** Bug watch added: github.com/pop-os/pop/issues #933 https://github.com/pop-os/pop/issues/933 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1874567 Title: [nvidia] Rotating secondary monitor to portrait fails, results in landscape To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-control-center/+bug/1874567/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884470] Re: Nested virt fails with 'failed to set MSR' causing QEMU to abort
*** This bug is a duplicate of bug 1882774 *** https://bugs.launchpad.net/bugs/1882774 ** This bug has been marked a duplicate of bug 1882774 issues with secondary VMX execution controls -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884470 Title: Nested virt fails with 'failed to set MSR' causing QEMU to abort To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1884470/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882774] Re: issues with secondary VMX execution controls
Hi Christian, I have tested the exact same patch on Azure over on bug 1884470 and I can confirm that it fixes the issue. I will be eagerly awaiting your upload to hit -proposed. ** Tags added: sts -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882774 Title: issues with secondary VMX execution controls To manage notifications about this bug go to: https://bugs.launchpad.net/cloud-archive/+bug/1882774/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884470] Re: Nested virt fails with 'failed to set MSR' causing QEMU to abort
** No longer affects: qemu (Ubuntu Groovy) ** Changed in: qemu (Ubuntu) Status: In Progress => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884470 Title: Nested virt fails with 'failed to set MSR' causing QEMU to abort To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1884470/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884440] Re: videos
Which app(s) are you referring to? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884440 Title: videos To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1884440/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884440] Re: videos
Also please explain in more detail what isn't working, and in which apps. ** Package changed: xorg (Ubuntu) => ubuntu ** Changed in: ubuntu Status: New => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884440 Title: videos To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+bug/1884440/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884470] Re: Nested virt fails with 'failed to set MSR' causing QEMU to abort
Attached is a debdiff for focal. ** Patch added: "QEMU debdiff for focal" https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1884470/+attachment/5385985/+files/lp-1884470-focal.debdiff -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884470 Title: Nested virt fails with 'failed to set MSR' causing QEMU to abort To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1884470/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884454] Re: [RTL8723BE] bluetooth range
hi Sandeep Would you please give me a try then test it and capture dmesg after reboot. #cp /usr/lib/firmware/rtl_bt/rtl8723d_config.bin /usr/lib/firmware/rtl_bt/rtl8723b_config.bin #reboot -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884454 Title: [RTL8723BE] bluetooth range To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884454/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884410] Re: I was watching a live video on YouTube..Soon after the programme is over, I'm seeing volume icon popping up on the screen
Ubuntu 19.10 is about to reach end-of-life: https://wiki.ubuntu.com/Releases Please install Ubuntu 20.04 instead and then open new bugs for any problems you find. ** Changed in: pulseaudio (Ubuntu) Status: New => Won't Fix ** Tags added: eoan -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884410 Title: I was watching a live video on YouTube..Soon after the programme is over, I'm seeing volume icon popping up on the screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1884410/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884393] Re: With Auto-hide dock enabled, icons get hidden behind dock & dock does not hide untill there's an app near it
This is the intended behaviour and won't be fixed. The desktop icons are designed to occupy the maximum space that is usually available. ** Package changed: xorg (Ubuntu) => gnome-shell-extension-desktop-icons (Ubuntu) ** Changed in: gnome-shell-extension-desktop-icons (Ubuntu) Status: New => Won't Fix ** Package changed: gnome-shell-extension-desktop-icons (Ubuntu) => gnome-shell-extension-ubuntu-dock (Ubuntu) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884393 Title: With Auto-hide dock enabled, icons get hidden behind dock & dock does not hide untill there's an app near it To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell-extension-ubuntu-dock/+bug/1884393/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1882630] Re: [amdgpu] Plymouth boot animation (dots) drawn over the desktop wallpaper
Those attachments do not relate to this bug. Please open a new bug for the attachment in comment #9. The attachment in comment #11 is bug 1884428. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1882630 Title: [amdgpu] Plymouth boot animation (dots) drawn over the desktop wallpaper To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/plymouth/+bug/1882630/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883066] Re: After update cannot mount Android tablet
Cannot mount -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883066 Title: After update cannot mount Android tablet To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883066/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1880728] Re: [amdgpu] Gnome Shell freeze
I don't think log files are useful at this stage. We should either defer to the bugs mentioned in comment #13 or please continue reporting crashes using the steps in comment #2. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1880728 Title: [amdgpu] Gnome Shell freeze To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell/+bug/1880728/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884472] [NEW] a2jmidid checkbox do not work correctly
Public bug reported: Because the default setting for the jack midi driver is "raw", the a2jmidid can't connect to the jack midi hardware ports. After changing the midi driver in ~/.config/jack/conf.xml to seq or none and restarting jack the ports are exported correctly After clicking the a2jmidid checkbox, the program should check if the jack midi is raw and change it to seq or none. System info: Ubuntu Studio 20.04 LTS ubuntustudio-controls 1.12.6~20.04.1 ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: ubuntustudio-controls 1.12.6~20.04.1 ProcVersionSignature: Ubuntu 5.4.0-37.41-lowlatency 5.4.41 Uname: Linux 5.4.0-37-lowlatency x86_64 ApportVersion: 2.20.11-0ubuntu27.3 Architecture: amd64 CasperMD5CheckResult: skip CurrentDesktop: XFCE Date: Sun Jun 21 23:28:55 2020 InstallationDate: Installed on 2020-01-18 (155 days ago) InstallationMedia: Ubuntu-Studio 19.10 "Eoan Ermine" - Release amd64 (20191017) PackageArchitecture: all SourcePackage: ubuntustudio-controls UpgradeStatus: Upgraded to focal on 2020-04-24 (58 days ago) ** Affects: ubuntustudio-controls (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884472 Title: a2jmidid checkbox do not work correctly To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/ubuntustudio-controls/+bug/1884472/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1883981] Re: dash-to-dock extension gets buggy after lock
** Changed in: gnome-shell-extension-dashtodock (Ubuntu) Status: Incomplete => Invalid ** Changed in: gnome-shell-extension-ubuntu-dock (Ubuntu) Status: Incomplete => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1883981 Title: dash-to-dock extension gets buggy after lock To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-shell-extension-dashtodock/+bug/1883981/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1878275] Re: [qxl] wayland session hard freezes on login from GDM (X11 session works fine)
Thanks for the videos. One thing you didn't seem to try, and I think is the most likely to work, would be: Ctrl+Alt+F3, Ctrl+Alt+F2 because VT2 is where you want to go in the end but it might be ignored until you switch to VT3 or higher first. Secondly, I can now see the ssh problem you mentioned... Enter passphrase for /home/john/.ssh/id_rsa: * ssh-add: Identities added: /home/john/.ssh/id_rsa Yes that sounds like a general account problem which would explain why you experience trouble with both physical and virtual machines. So I suspect the real problem is coming from: "I have keychain installed for password-less SSH" Please remove "keychain" and your bash_profile modifications. ** Package changed: mutter (Ubuntu) => ubuntu ** Summary changed: - [qxl] wayland session hard freezes on login from GDM (X11 session works fine) + wayland session hard freezes on login from GDM (X11 session works fine) ** Package changed: ubuntu => gdm3 (Ubuntu) ** Changed in: gdm3 (Ubuntu) Status: Confirmed => Incomplete -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1878275 Title: wayland session hard freezes on login from GDM (X11 session works fine) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gdm3/+bug/1878275/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884428] Re: calculater not open
Please solve this problem -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884428 Title: calculater not open To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/gnome-calculator/+bug/1884428/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884430] Re: ubuntu hangs
please solve it -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884430 Title: ubuntu hangs To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1884430/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884471] [NEW] Executing 'grub-install/dev/sda6' failed
Public bug reported: During install of Ubuntu 20.04 from USB, grub-installer exits with message: Executing 'grub-install/dev/sda6' failed. This is fatal error 4 partitions on HDD (PATA) to be used for Kubuntu 8.10: - /dev/sda2 - /dev/sda3 - /dev/sda4 - /dev/sda6 for / A primary bootloader exists in /dev/sda6 for installing Ubuntu. ProblemType: Bug DistroRelease: Ubuntu 20.04 Package: ubiquity 20.04.15 ProcVersionSignature: Ubuntu 5.4.0-26.30-generic 5.4.30 Uname: Linux 5.4.0-26-generic x86_64 NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair ApportVersion: 2.20.11-0ubuntu27 Architecture: amd64 CasperMD5CheckMismatches: ./pool/restricted/l/linux-restricted-modules/linux-modules-nvidia-440-generic-hwe-20.04_5.4.0-26.30+2_amd64.deb ./pool/restricted/l/linux-restricted-modules/linux-modules-nvidia-390-generic-hwe-20.04_5.4.0-26.30+2_amd64.deb ./pool/restricted/l/linux-restricted-modules-oem-5.6/linux-modules-nvidia-440-5.6.0-1007-oem_5.6.0-1007.7_amd64.deb CasperMD5CheckResult: skip CasperVersion: 1.445 CurrentDesktop: ubuntu:GNOME Date: Mon Jun 22 08:03:42 2020 InstallCmdLine: BOOT_IMAGE=/casper/vmlinuz file=/cdrom/preseed/ubuntu.seed maybe-ubiquity quiet splash --- LiveMediaBuild: Ubuntu 20.04 LTS "Focal Fossa" - Release amd64 (20200423) ProcEnviron: LANGUAGE=en_IN PATH=(custom, no user) XDG_RUNTIME_DIR= LANG=en_IN LC_NUMERIC=C.UTF-8 SourcePackage: grub-installer UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: grub-installer (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug focal ubiquity-20.04.15 ubuntu -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884471 Title: Executing 'grub-install/dev/sda6' failed To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/grub-installer/+bug/1884471/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884470] [NEW] Nested virt fails with 'failed to set MSR' causing QEMU to abort
Public bug reported: [Impact] When using an instance on Azure Cloud, nested kvm virtualisation fails with the following error message: qemu-system-x86_64: error: failed to set MSR 0x48b to 0x11582e qemu-system-x86_64: /build/qemu-FC5BvZ/qemu-4.2/target/i386/kvm.c:2680: kvm_buf_set_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed. It appears that some systems can expose particular features via CPUID, but can lack the corresponding VMX control for that feature. When this happens, such as with MSR 0x48b on Azure Cloud, attempts to enable the feature fail and QEMU aborts. [Testcase] Create an instance on Azure with the latest Focal image, install QEMU, and prepare to launch a VM: $ sudo -s # apt install qemu-kvm bridge-utils # BR_NAME="br0" # BR_ADDR="192.168.1.10" # ip link add "$BR_NAME" type bridge # ip addr add "$BR_ADDR"/24 dev "$BR_NAME" # ip link set "$BR_NAME" up # tap_name="tap1" # br_name=$BR_NAME # ip tuntap add $tap_name mode tap user $(whoami) multi_queue # ip link set $tap_name up # ip link set $tap_name master $br_name Download a guest VM: # wget https://cloud-images.ubuntu.com/focal/current/focal-server- cloudimg-amd64-disk-kvm.img Launch the VM: # /usr/bin/qemu-system-x86_64 -cpu host -smp 2 -m 2048 -hda focal-server-cloudimg-amd64-disk-kvm.img -device virtio-net-pci,netdev=net0,mac=52:54:00:f5:be:83 -netdev user,id=net0,hostfwd=tcp::60022-:22 -device virtio-net-pci,netdev=net1,mac=52:54:00:c6:29:dc,mq=on,vectors=10 -netdev tap,id=net1,ifname=tap1,script=no,vhost=on,queues=4 -display none -enable-kvm -daemonize With an unpatched QEMU, VM creation will fail with: qemu-system-x86_64: error: failed to set MSR 0x48b to 0x11582e qemu-system-x86_64: /build/qemu-FC5BvZ/qemu-4.2/target/i386/kvm.c:2680: kvm_buf_set_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed. A test package for focal is available in the following ppa: https://launchpad.net/~mruffell/+archive/ubuntu/sf284806-test The patched QEMU from the above ppa fixes the problem, and the VM launches successfully. [Regression Potential] The code adds a check to see if MSR_IA32_VMX_PROCBASED_CTLS2 is present, and if it is, then we skip over checking of particular CPUIDs and subsequent enabling of VMX's, since the CPUID might exist and the VMX won't. If a regression were to occur, some systems might be missing VMX's being enabled if these checks were incorrectly skipped, leading to particular features missing for a VM. In the worse case scenario, the VM may not start due to missing or incorrectly set MSRs. The code is simple and targeted, and I believe the chance for regression is very low. [Other Info] The commit that fixes the problem is: Commit: 4a910e1f6ab4155ec8b24c49b2585cc486916985 From: Vitaly Kuznetsov Date: Tue, 31 Mar 2020 18:27:52 +0200 Subject: target/i386: do not set unsupported VMX secondary execution controls Link: https://github.com/qemu/qemu/commit/4a910e1f6ab4155ec8b24c49b2585cc486916985 This fixes 048c951 ("target/i386: work around KVM_GET_MSRS bug for secondary execution controls"), which was introduced in QEMU 4.2, meaning only Focal and Groovy require fixing. ** Affects: qemu (Ubuntu) Importance: Medium Assignee: Matthew Ruffell (mruffell) Status: In Progress ** Affects: qemu (Ubuntu Focal) Importance: Medium Assignee: Matthew Ruffell (mruffell) Status: In Progress ** Affects: qemu (Ubuntu Groovy) Importance: Medium Assignee: Matthew Ruffell (mruffell) Status: In Progress ** Tags: sts ** Also affects: qemu (Ubuntu Groovy) Importance: Undecided Status: New ** Also affects: qemu (Ubuntu Focal) Importance: Undecided Status: New ** Changed in: qemu (Ubuntu Focal) Status: New => In Progress ** Changed in: qemu (Ubuntu Groovy) Status: New => In Progress ** Changed in: qemu (Ubuntu Focal) Importance: Undecided => Medium ** Changed in: qemu (Ubuntu Groovy) Importance: Undecided => Medium ** Changed in: qemu (Ubuntu Focal) Assignee: (unassigned) => Matthew Ruffell (mruffell) ** Changed in: qemu (Ubuntu Groovy) Assignee: (unassigned) => Matthew Ruffell (mruffell) ** Tags added: sts -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884470 Title: Nested virt fails with 'failed to set MSR' causing QEMU to abort To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/qemu/+bug/1884470/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 146864] Re: command-not-found crash on CTRL+C exit
Michael, I don't know if this is the same issue as what opened the thread, but I got similar output to you after a Ctrl-C. "foo" ^C Sorry, command-not-found has crashed! Please file a bug report at: https://bugs.launchpad.net/command-not-found/+filebug Please include the following information with the report: command-not-found version: 0.3 Python version: 3.6.9 final 0 Distributor ID: Ubuntu Description:Ubuntu 18.04.4 LTS Release:18.04 Codename: bionic Exception information: [Errno 3] No such process Traceback (most recent call last): File "/usr/lib/python3.6/subprocess.py", line 425, in run stdout, stderr = process.communicate(input, timeout=timeout) File "/usr/lib/python3.6/subprocess.py", line 855, in communicate self.wait() File "/usr/lib/python3.6/subprocess.py", line 1477, in wait (pid, sts) = self._try_wait(0) File "/usr/lib/python3.6/subprocess.py", line 1424, in _try_wait (pid, sts) = os.waitpid(self.pid, wait_flags) KeyboardInterrupt During handling of the above exception, another exception occurred: Traceback (most recent call last): File "/usr/lib/python3/dist-packages/CommandNotFound/util.py", line 23, in crash_guard callback() File "/usr/lib/command-not-found", line 90, in main if not cnf.advise(args[0], options.ignore_installed) and not options.no_failure_msg: File "/usr/lib/python3/dist-packages/CommandNotFound/CommandNotFound.py", line 353, in advise snaps, mispell_snaps = self.get_snaps(command) File "/usr/lib/python3/dist-packages/CommandNotFound/CommandNotFound.py", line 113, in get_snaps universal_newlines=True) File "/usr/lib/python3.6/subprocess.py", line 356, in check_output **kwargs).stdout File "/usr/lib/python3.6/subprocess.py", line 432, in run process.kill() File "/usr/lib/python3.6/subprocess.py", line 1610, in kill self.send_signal(signal.SIGKILL) File "/usr/lib/python3.6/subprocess.py", line 1600, in send_signal os.kill(self.pid, sig) ProcessLookupError: [Errno 3] No such process -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/146864 Title: command-not-found crash on CTRL+C exit To manage notifications about this bug go to: https://bugs.launchpad.net/command-not-found/+bug/146864/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884001] Re: [Ice Lake] External 4k monitor periodically shows black screen
This is pretty similar to audio issue we've encountered before. Could you open sound setting and play test sound to see if this issue happens while playing sounds? BTW, could you also check if it lists the same audio output devices when the dock cable is plugged at left side and right side. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884001 Title: [Ice Lake] External 4k monitor periodically shows black screen To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1884001/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1884438] Re: Audacity takes too much time to launch
Ok. While figuring out some solutions on my issue, I found a better solution - to use audacity as snap..! It worked just fine without any issue, and it's launch time is also less (only about 4 sec. except initial launch). Even though I will ask about this issue on forum. Thank you for your support..! -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1884438 Title: Audacity takes too much time to launch To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/audacity/+bug/1884438/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs