[Veritas-bu] Disable ndmp overwrite existing files
Hello, I search a solution to disable ndmp overwrite files when I make restore in NDMP mode on a emc2 NS700 ( Clariion Filer ). It's very urgent !!! because my restauration cancel the Quota Tree. Thanks, Regards, Didier BRUN. -- Didier BRUN THALES Division Services IOS/IMS/FS/SMS 25, rue Jules Vedrines 26027 VALENCE CEDEX Tel : 33 - (0)4 75 79 36 14 (Interne 793614) Fax : 33 - (0)4 75 79 86 16 (Interne 798616) [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Trunking in solaris...
Hi all, I`am new to solaris and wonder if anyone know if it's possible to trunk/team several network cards under solaris? If so, how do you do it? Thanks and regards, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Backup networks
Does anyone have a similar setup? Separate backup network from clients in one location to media servers in same location, but the master server can only see the clients and media servers on the public network. This causes 41 errors, we have come up with different work arounds but all of them are hooey. Is there a clean solution to this dilemma? I know the real solution is to have one backup network for everything, but this is politically impossible at the moment. Any suggestions welcomed. Regards, Patrick Whelan NetBackup Specialist Architect Engineering +44 20 7863 5243 Of all the things I've lost, I miss my mind the most! - Unknown There are only 10 kinds of people on earth - those who understand binary and those who don't. ... Als sie mich holten, gab es keinen mehr, der protestieren konnte -- Martin Niemöller * The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates (COLT) and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Backup networks
I wish that the setup you describe would work, but it CAN'T. The backup job will assign a port on the NIC that receives the request. If the master (10.1.1.1) sends the request to systemA (10.1.1.10) to use the storage unit on mediaA (10.1.1.2), the data will travel over the NIC that the master sent the data on. If the master (10.1.1.1) sent the request to systemA (10.1.1.10) to backup using the storage unit on mediaA-b (backup nic 10.2.1.2) it would never work. If you use the required interface setting on the client, then the request MUST come in to the client on that interface and the data can ONLY go out on that interface. Bobby Williams 2205 Peterson Drive Chattanooga, Tennessee 37421 423-296-8200 _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Whelan, Patrick Sent: Friday, December 01, 2006 5:45 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Backup networks Does anyone have a similar setup? Separate backup network from clients in one location to media servers in same location, but the master server can only see the clients and media servers on the public network. This causes 41 errors, we have come up with different work arounds but all of them are hooey. Is there a clean solution to this dilemma? I know the real solution is to have one backup network for everything, but this is politically impossible at the moment. Any suggestions welcomed. Regards, Patrick Whelan NetBackup Specialist Architect Engineering +44 20 7863 5243 Of all the things I've lost, I miss my mind the most! - Unknown There are only 10 kinds of people on earth - those who understand binary and those who don't. ... Als sie mich holten, gab es keinen mehr, der protestieren konnte -- Martin Niemöller * The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates (COLT) and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Veritas-bu Digest, Vol 8, Issue 1
Copying catalog from Win OS to Solaris: - First of all take a proper catalog backup - Stop NetBackup on source machine (Win OS) - Decompress catalog (if needed) ( bpimage -decompress -allclients) - Convert to ASCII (if needed) (cat_convert b2a) (I believe on Win OS this is already ASCII) - Stop Netbackup on the target machine - Copy over all images from source to target (AS ASCII !!) (\veritas\netbackup\db\images) - Start NetBackup on target machine - Try to browse through some restores - On target machine (Solaris) convert the catalog to bin (much faster) (cat_convert a2b) - On target machine compress catalog if needed Best Regards, Bart WALLEBROEK Systems Applications Management Support Specialist CustOPS - SDC Deployment Tel: + 32 2 655 30 75Mobile: + 32 478 31 61 77 S.W.I.F.T. SCRL Date: Thu, 30 Nov 2006 15:24:40 -0500 From: Steven L. Sesar [EMAIL PROTECTED] Subject: Re: [Veritas-bu] Migrate NBU 5.1 from Windows 2003 to Solaris 10 To: Ellis, Jason [EMAIL PROTECTED] Cc: veritas-bu@mailman.eng.auburn.edu Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=iso-8859-1 Ellis, Jason wrote: What, if any, caveats do I need to be aware of when migrating NetBackup 5.1 from Windows 2003 to Solaris? Is it even possible? Many, many caveats - NOT for the faint of heart Can I simply copy over the contents of the '\NetBackup\db'; '\NetBackup\var'; and '\Volmgr\database' from Windows to Solaris? No, you can't. Thank you in advanced! Jason Ellis Technical Consultant, Data Protection Team IndyMac Bank, La Mirada Datacenter Phone: (714) 520-3414 Mobile: (714) 889-8734 smime.p7s Description: S/MIME cryptographic signature ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trunking in solaris...
Sun has a software package to do this. It's Sun Trunking 1.3, and you can see it at http://www.sun.com/products/networking/ethernet/suntrunking ... It is free for Solaris 10 (SPARC x86), and costs $995 for Solaris 8 9. -- Mike Varney / HRI Hampus Lind [EMAIL PROTECTED] Sent by: [EMAIL PROTECTED] 12/01/2006 05:18 AM To veritas-bu@mailman.eng.auburn.edu cc Subject [Veritas-bu] Trunking in solaris... Hi all, I`am new to solaris and wonder if anyone know if it’s possible to trunk/team several network cards under solaris? If so, how do you do it? Thanks and regards, Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Master server merging
On 12/1/2006 6:18 AM, Evsyukov, Sergey wrote: Whether there is any way of merge of two NB master-servers in one? There is no supported way of doing this. .../Ed -- Ed Wilts, Mounds View, MN, USA mailto:[EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] RES: Master server merging
With NBU 6.0 I didn't try, but until the version 5.1 I know that is possible, you need only be careful with clients with the same name in both masters and change the configuration in all clients to point to new mergerd master. T+ Carlos Alberto Lima dos Santos Eng. Computação Jundiaí SP-BR * mailto:[EMAIL PROTECTED] [EMAIL PROTECTED] H https://www.linkedin.com/in/carlostoca skype carlostoca msn only [EMAIL PROTECTED] _ De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Evsyukov, Sergey Enviada em: sexta-feira, 1 de dezembro de 2006 10:18 Para: veritas-bu@mailman.eng.auburn.edu Assunto: [Veritas-bu] Master server merging Hello, Whether there is any way of merge of two NB master-servers in one? We have two solaris backup networks with separate tape libraries and need to merge this networks. Is it possible? NB 6.0 OS - Solaris Tanks for any help, Sergey ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Backup networks
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Why can't the master and media servers be on both networks each. Set the client name in the policy to go over the front network for those systems that only have one NIC, and set the name to one that is on the backup network for those hosts that have the second nic? What about 802.1q? Thanks Peter Peter DrakeUnderkoffler Xinupro, LLC 617-834-2352 Whelan, Patrick wrote: Does anyone have a similar setup? Separate backup network from clients in one location to media servers in same location, but the master server can only see the clients and media servers on the public network. This causes 41 errors, we have come up with different work arounds but all of them are hooey. Is there a clean solution to this dilemma? I know the real solution is to have one backup network for everything, but this is politically impossible at the moment. Any suggestions welcomed. Regards, Patrick Whelan NetBackup Specialist Architect Engineering +44 20 7863 5243 Of all the things I've lost, I miss my mind the most! - Unknown There are only 10 kinds of people on earth - those who understand binary and those who don't. ... Als sie mich holten, gab es keinen mehr, der protestieren konnte -- Martin Niemöller * The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way. The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing [EMAIL PROTECTED] and delete the message and any attachments without retaining any copies. Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses. No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates (COLT) and any other party by email Communications unless expressly agreed in writing with such other party. Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (FreeBSD) iD8DBQFFcCp7l+lekZRM55oRAsZEAKCmR9cn8MGGkEEInWPwjqwbbJDjfwCgrbXw tRMVkfm6tKWI+GnNpA4bD4c= =d3cS -END PGP SIGNATURE- ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Weird 52 error becuase it positions tape
Netbackup 5.0mp4 on Solaris 9 attached to an L700. I have a media manager which is connected to shared drives running SSO on an L700. All drives are up and visible. I kick a job off and it finds tapes, puts them in and start to position them but then times out and gives status 52. I have tried freezing the tapes so it uses different tapes. vmdareq on the master shows the media has reserved 2 of the drives, and the tapes are actually being put into drives as i can see under robtest and 's d'. Any 52 ive ever had before has been not able to see drives, drives down or the processes not running. Anyone any other ideas where to look? Cant see anything obvious in bptm log on the media server. Occasionally theres an unable to lock media offset something error but the rest all looks ok. Dave ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] RES: Master server merging
* Carlos Alberto Lima dos santos [EMAIL PROTECTED] [2006-12-01 11:22]: With NBU 6.0 I didn't try, but until the version 5.1 I know that is possible, you need only be careful with clients with the same name in both masters and change the configuration in all clients to point to new mergerd master. Sure, but like Ed said, there is NO _supported_ way of doing it. It might work, probably will work, but you are on your own if it doesn't. -- David Rock [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] Netbackup - Active Directory
Hello, Can anyone confirm that it is my understanding that AD is backed up as part of the system state or shadow copy components directive, since it's part of the registry. Or do I need to create a separate policy? agent? -- DLew97 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Tape drive 800 and 252 status error
Hi, I have another good one. When I run the make_scsi_dev command, (which also runs when you install the server software) on a Linux server running Susi 9, my system crashes. Has anyone run into the problem before. TIA Matthew Johnson Entertainment Partners Backup Administrator Work - 818-955-6357 Cell - 805-469-8867 Matthew Johnson System Backup Administrator Information Technology Operations 2835 N. Naomi Street Burbank, CA 91504-2024 Tel. (818) 955-6357 Fax. For information on our products and services, please visit http://www.entertainmentpartners.com/ Disclaimer - December 1, 2006 This email and any attachments are confidential and intended solely for [EMAIL PROTECTED] If you are not a named addressee you are prohibited from reviewing, printing, disseminating, distributing, copying or altering this email or any part of it. If you have received this communication in error, please notify the sender of the error immediately, do not read or use the communication in any manner, destroy all copies, and delete it from your system if the communication was sent via email. Warning: Although Entertainment Partners has taken reasonable precautions to ensure no viruses are present in this email, the recipient is responsible for checking for and deleting viruses. Entertainment Partners does not accept responsibility for any loss or damage arising from the use of this email or attachments. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
[Veritas-bu] RES: RES: Master server merging
Hi David, Really is not suported but the Veritas consulting has a procedure to do this and works without problems, I opened some cases and I made this procedure some times. T+ Carlos Alberto Lima dos Santos Eng. Computação Jundiaí SP-BR * [EMAIL PROTECTED] H https://www.linkedin.com/in/carlostoca skype carlostoca msn only [EMAIL PROTECTED] -Mensagem original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de David Rock Enviada em: sexta-feira, 1 de dezembro de 2006 14:26 Para: veritas-bu@mailman.eng.auburn.edu Assunto: Re: [Veritas-bu] RES: Master server merging * Carlos Alberto Lima dos santos [EMAIL PROTECTED] [2006-12-01 11:22]: With NBU 6.0 I didn't try, but until the version 5.1 I know that is possible, you need only be careful with clients with the same name in both masters and change the configuration in all clients to point to new mergerd master. Sure, but like Ed said, there is NO _supported_ way of doing it. It might work, probably will work, but you are on your own if it doesn't. -- David Rock [EMAIL PROTECTED] ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Novidade no Yahoo! Mail: receba alertas de novas mensagens no seu celular. Registre seu aparelho agora! http://br.mobile.yahoo.com/mailalertas/ ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Reg: how to restore the data from one master server to another master server in netbackup 6.0
You need to put a force restore entry in the bp.conf on the onsite server. FORCE_RESTORE_MEDIA_SERVER = offshore-server onsite-server You will have to cycle the netbackup software. From: ramaswamy savi [EMAIL PROTECTED] Date: 2006/12/01 Fri PM 12:37:01 EST To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Reg: how to restore the data from one master server to another master server in netbackup 6.0 HI I have two master server, one is in offshore with tape library and another master server in onsite with standalone drive connected. I have send the tape to onsite to restore the data in their master server , and catalog has been uploaded to thier server from the dbimages directory. When i click resore , it is listing all the data but it it refering to offshore server and i am not able to restore in windows platform. both the machine is windows with netbcakup 6.0 Appreciate if u provide the solution. thanks in advance. Regards Hemalatha - Everyone is raving about the all-new Yahoo! Mail beta. Bobby Williams 2205 Peterson Drive Chattanooga, TN 37421 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Trunking in solaris...
Thanks all... Hampus Lind Rikspolisstyrelsen National Police Board Tel dir: +46 (0)8 - 401 99 43 Tel mob: +46 (0)70 - 217 92 66 E-mail: [EMAIL PROTECTED] -Ursprungligt meddelande- Från: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] För Darren Dunham Skickat: den 1 december 2006 17:02 Till: Veritas-bu@mailman.eng.auburn.edu Ämne: Re: [Veritas-bu] Trunking in solaris... I`am new to solaris and wonder if anyone know if it's possible to = trunk/team several network cards under solaris? If so, how do you do it?=20 All versions of Solaris support IPMP in software. This allows for a bit of outbound load sharing, but isn't really appropriate for load balancing incoming data (as you might want on a netbackup server). It does provide you with failover though, and you can balance the incoming traffic manually. If all you need is failover, then it may be sufficient. SunTrunking is an extra application that you can run on Solaris. It only supports certain hardware in certain combinations. It's a cost purchase for versions prior to Solaris 10. Solaris 10 can use SunTrunking as well, but also allows for link aggregation of any networking hardware that uses gld3 drivers. This is built into Solaris and doesn't require extra software. IP Mulitpathing (IPMP) and Link Aggregation configuration details should be in the administrators guide for the version of Solaris you have (if supported). -- Darren Dunham [EMAIL PROTECTED] Senior Technical Consultant TAOShttp://www.taos.com/ Got some Dr Pepper? San Francisco, CA bay area This line left intentionally blank to confuse you. ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] Netbackup - Active Directory
Active Directory is actually both in the registry of a domain controller and in several files on the disk, most notably - %SystemRoot%\ntds\NTDS.DIT. Suffice to say, you would probably never restore just the registry to a domain controller, you would restore the entire system in AD Restore Mode in which case yes, the C: and System State would be enough to restore the Active Directory. No special agent or policy is required. Your average ALL_LOCAL_DRIVES will do the job fine. -Jonathan From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of DLew97 Sent: Friday, December 01, 2006 11:43 AM To: veritas-bu@mailman.eng.auburn.edu Subject: [Veritas-bu] Netbackup - Active Directory Hello, Can anyone confirm that it is my understanding that AD is backed up as part of the system state or shadow copy components directive, since it's part of the registry. Or do I need to create a separate policy? agent? -- DLew97 ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] RMAN backups - incomplete streams
Hi Michael, My problem is no error et all. And still the DBA seems to report that the backup has failed. Much to our dismay, the restore of the very successful backup also fails. EOF file error @ DR restore. Initially we thgt its problem with the media, but later we fortunately had a similar situation here on-site, checked with the DBA and he found that the backup had reported error. Its impossible from me to scan the multitudes of dbclient log files that are generated. I'm totally at the mercy of my DBA to report errors and correct them. Gurus, Any techniques you use for a large enivorn??? pls post so that I can derive some strategy to tackle this situation. Regards, BIJU On 12/1/06, Sponsler, Michael [EMAIL PROTECTED] wrote: I have noticed that the parent oracle backup (ie Full or Differential-Inc) backup, that actually runs the RMAN .sh script, will sometimes fail with an error 6. Looking into the logs, I notice that I get an Oracle error that basically says: Cannot gain sole ownership of Control File, failure. The Default Application Backup will run later will a success, status 0. But the fact that the parent fails with error 6 gets on my nerves. I've talked to my Oracle DBA about this, and he says it's correct, and I'm to expect it from time to time. I *really* wish that Netbackup would regulate that job to queued until the control file is ready.l -- Mike -- *From:* [EMAIL PROTECTED] [mailto: [EMAIL PROTECTED] *On Behalf Of *Veritas Netbackup *Sent:* Thursday, November 30, 2006 3:16 PM *To:* Veritas-bu@mailman.eng.auburn.edu *Subject:* [Veritas-bu] RMAN backups - incomplete streams Hi All, I find it strange, say a RMAN backup has 3 streams, 2 of them complete and one of them does not appear et all. The backup would still show up as complete. The reasons like commn failure e.t.c. are logged in the dbclient. The RMAN catalog displays backup error but the veritas catalog backup is success. I have logged a support request and we are working towards resolving such errors. Would be great if the list can help me. Regards BIJU KRISHNAN ___ Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
Re: [Veritas-bu] RMAN backups - incomplete streams
Hi Steven,
This sounds good, if its fine can u please help me embed the same trick.
Is it in the Selection script {the RMAN script} or bpstart script, this
clue wd help.
Regards,
BIJU KRISHNAN
On 12/2/06, Steven L. Sesar [EMAIL PROTECTED] wrote:
Unfortunately, this is a limitation of NBU's Oracle agent. The exit
status that you see in the activity monitor is not necessarily the exit
status of your backup. It is the exit status of the SCRIPT that NBU runs,
which kicks off your RMAN backup.
What we did to get around this, was to build one monolithic script, which
parses input passed to it from NBU when any given Oracle policy runs. Based
on that (and a few other proprietary things), the script shuts down the apps
associated with the SID that is about to be backed up, shuts down the SID,
brings it up in startup mount mode, then builds and executes the RMAN code.
The trick, that we coded in, was that if RMAN fails, the script will
exit with an artificial exit code, which in turn, gets passed to the
activity monitor.
Now, anyone that looks at the activity monitor, can trust the exit status
of any given Oracle backup.
--Steve
Veritas Netbackup wrote:
Hi All,
I find it strange, say a RMAN backup has 3 streams, 2 of them complete and
one of them does not appear et all. The backup would still show up as
complete. The reasons like commn failure e.t.c. are logged in the
dbclient.
The RMAN catalog displays backup error but the veritas catalog backup is
success.
I have logged a support request and we are working towards resolving such
errors. Would be great if the list can help me.
Regards
BIJU KRISHNAN
--
___
Veritas-bu maillist - [EMAIL
PROTECTED]://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
--
===
Steven L. Sesar
Lead Operating Systems Programmer/Analyst
UNIX Application Services R101
The MITRE Corporation
202 Burlington Road - MS K101
Bedford, MA 01730
tel: (781) 271-7702
fax: (781) 271-2600
mobile: (617) 519-8933
email: [EMAIL PROTECTED]
===
___
Veritas-bu maillist - Veritas-bu@mailman.eng.auburn.edu
http://mailman.eng.auburn.edu/mailman/listinfo/veritas-bu
