Re: [Voyage-linux] Voyage 0.11.0 and APU2 no LEDs
Hi Richard, Please check if leds_apu2 is loaded? Use command: lsmod|grep leds Regards, Punky On 6/16/2017 1:06 PM, Richard Warburton wrote: Fresh install of Voyage 0.11.0, alas on startup I see the message: /etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:1/trigger: Directory nonexistent /etc/init.d/voyage-util: 77: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent /etc/init.d/voyage-util: 78: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent /etc/init.d/voyage-util: 79: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent Looking inside /sys/class/leds, there's only one directory called mmc0:: Is there a simple fix for this? I tried the current release as well, but no dice. Thanks in advance. ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux -- Regards, Kim-man "Punky" Tse * Open Source Embedded Solutions and Systems - Voyage Linux (http://linux.voyage.hk) - Voyage MPD (http://linux.voyage.hk/voyage-mpd) - Voyage MuBox (http://mubox.voyage.hk) * Voyage Store (http://store.voyage.hk) ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] Voyage 0.11.0 and APU2 no LEDs
Hi Bolle, Yes, your email got the leds fully working! Many thanks. For anyone else following, the modules exist but aren't being loaded on startup. After editing /etc/modules as you suggested, I was able turn the leds on an off but no heartbeat or timer etc. Adding VOYAGE_SYSTEM_MODULES to vi /etc/voyage.conf did nothing, but I could load them all by hand. So I simply added the module list to: vi /etc/modules (as opposed to just leds-apu2). And that was that. Thanks again Bolle! On 16 June 2017 at 18:01, wrote: > Again me ;-) > > Maybe this could help you or bring you into the right direction. > > This is an excerpt from my manual installation: > > APU2# cp leds-apu2.ko /lib/modules/3.16.7-ckt9-voyage/kernel/drivers/leds/ > APU2# depmod -a > APU2# vi /etc/modules > >> leds-apu2 > <<< > APU2# modprobe leds-apu2 > > APU2# vi /etc/voyage.conf > >> VOYAGE_PROFILE=APU2 > VOYAGE_SYSTEM_MODULES="sp5100-tco; led-class; ledtrig-heartbeat; > ledtrig-timer; ledtrig-netdev; leds-apu2;" > <<< > > APU2# vi /etc/init.d/voyage-util > >> 'APU2') > echo heartbeat > /sys/class/leds/apu2\:2/trigger > echo ata1 > /sys/class/leds/apu2\:3/trigger > ;; > <<< > > The paths would differ on Voyage 0.11.0. The ">>>" and "<<<" are only > markers. > > I would check the following: > > - Does the kernel module exist ? > - Can you load the kernel module by hand ? > - Is the kernel module in the Voyage profile ? > > Andreas > > > On 2017-06-16 07:26, Richard Warburton wrote: > >> Thanks Andreas, >> >> Voyage 0.11.0 explicitly says that it supports APU2 leds in the >> release data (unless I'm reading it wrong), so I'm hoping it's a minor >> config issue. >> >> If I have no luck, I might have a go with the sources you provide. >> >> Thanks again. >> >> On 16 June 2017 at 17:18, wrote: >> >> Hello Richard >>> >>> I don't know about a simple fix. On my APU2s with Voyage 0.10.0, the >>> kernel module has been missing. >>> >>> Using the Voyage SDK, I've compiled and installed the missing kernel >>> module using this sources: >>> http://daduke.org/dl/apu2-leds.tgz [2] >>> >>> >>> On Voyage 0.11.0, it could be the same problem. >>> >>> Cheers >>> Andreas >>> >>> On 2017-06-16 07:06, Richard Warburton wrote: >>> >>> Fresh install of Voyage 0.11.0, alas on startup I see the message: /etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:1/trigger: Directory nonexistent /etc/init.d/voyage-util: 77: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent /etc/init.d/voyage-util: 78: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent /etc/init.d/voyage-util: 79: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent Looking inside /sys/class/leds, there's only one directory called mmc0:: Is there a simple fix for this? I tried the current release as well, but no dice. Thanks in advance. ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux [1] >>> >> -- >> >> Richard Warburton - MSc(Hons), PGDipSci, BE(Hons) +64 9 377-2881 ext 9 >> Skagerrak Software - Senior Developer - >> http://www.skagerraksoftware.com/ >> >> 40/22a Willcott St, Mt Albert 1025 - PO Box 77039, Mt Albert, Auckland >> 1350 >> >> Links: >> -- >> [1] http://list.voyage.hk/mailman/listinfo/voyage-linux >> [2] http://daduke.org/dl/apu2-leds.tgz >> > -- Richard Warburton - MSc(Hons), PGDipSci, BE(Hons) +64 9 377-2881 ext 9 Skagerrak Software - Senior Developer - http://www.skagerraksoftware.com/ 40/22a Willcott St, Mt Albert 1025 - PO Box 77039, Mt Albert, Auckland 1350 ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
Re: [Voyage-linux] Voyage 0.11.0 and APU2 no LEDs
Thanks Andreas, Voyage 0.11.0 explicitly says that it supports APU2 leds in the release data (unless I'm reading it wrong), so I'm hoping it's a minor config issue. If I have no luck, I might have a go with the sources you provide. Thanks again. On 16 June 2017 at 17:18, wrote: > Hello Richard > > I don't know about a simple fix. On my APU2s with Voyage 0.10.0, the > kernel module has been missing. > > Using the Voyage SDK, I've compiled and installed the missing kernel > module using this sources: > http://daduke.org/dl/apu2-leds.tgz > > On Voyage 0.11.0, it could be the same problem. > > Cheers > Andreas > > > > On 2017-06-16 07:06, Richard Warburton wrote: > >> Fresh install of Voyage 0.11.0, alas on startup I see the message: >> /etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create >> /sys/class/leds/apu2:1/trigger: Directory nonexistent >> /etc/init.d/voyage-util: 77: /etc/init.d/voyage-util: cannot create >> /sys/class/leds/apu2:3/trigger: Directory nonexistent >> >> /etc/init.d/voyage-util: 78: /etc/init.d/voyage-util: cannot create >> /sys/class/leds/apu2:3/trigger: Directory nonexistent >> >> /etc/init.d/voyage-util: 79: /etc/init.d/voyage-util: cannot create >> /sys/class/leds/apu2:3/trigger: Directory nonexistent >> >> Looking inside /sys/class/leds, there's only one directory called >> mmc0:: >> >> Is there a simple fix for this? I tried the current release as well, >> but no dice. >> >> Thanks in advance. >> ___ >> Voyage-linux mailing list >> Voyage-linux@list.voyage.hk >> http://list.voyage.hk/mailman/listinfo/voyage-linux >> > -- Richard Warburton - MSc(Hons), PGDipSci, BE(Hons) +64 9 377-2881 ext 9 Skagerrak Software - Senior Developer - http://www.skagerraksoftware.com/ 40/22a Willcott St, Mt Albert 1025 - PO Box 77039, Mt Albert, Auckland 1350 ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux
[Voyage-linux] Voyage 0.11.0 and APU2 no LEDs
Fresh install of Voyage 0.11.0, alas on startup I see the message: /etc/init.d/voyage-util: 76: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:1/trigger: Directory nonexistent /etc/init.d/voyage-util: 77: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent /etc/init.d/voyage-util: 78: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent /etc/init.d/voyage-util: 79: /etc/init.d/voyage-util: cannot create /sys/class/leds/apu2:3/trigger: Directory nonexistent Looking inside /sys/class/leds, there's only one directory called mmc0:: Is there a simple fix for this? I tried the current release as well, but no dice. Thanks in advance. ___ Voyage-linux mailing list Voyage-linux@list.voyage.hk http://list.voyage.hk/mailman/listinfo/voyage-linux