Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
Hi PROGRESS its not deleting the ~/jtsdk/wsjtx/gar/ that allows the build its purging QT5 then re-installing libqt5serialport5-dev, qtmultimedia5-dev the dependencies for those load everything else on Ubuntu 16.04 purging : sudo apt-get purge libqt5* & sudo apt-get purge qt5* It would suggest that regular updating , ( apt-get update && apt-get upgrade ) over a period of time breaks actual dependencies I can at the moment rebuild multiple times , just with the clean option set , without altering the contents of ~/jtsdk/wsjtx/gar/ 100% PITA On Wed, 7 Dec 2016 10:05:27 + Richard Bown wrote: > Hi Greg > I dont doubt the rc3 builds are OK, I downloaded your build for armhf this > morning and it runs. > > All I get reported on startup is unable to initialise openGLfor > RasterGLSurface, reverting to > RasterSurface > and buffer under runs. > Back to my attempts to build on the beast from Korea > It differs from the Raspbery Pi and clones with the hardware and > the drivers are propriety , and I suspect this is where the problem lie. > On the two errors on the build its throwing up 10+ opengl errors like > > /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2138:5: > error:‘::glVertexAttribPointer’ has not been declared > ::glVertexAttribPointer(indx, size, type, > normalized, stride, ptr); Always where a ::glVertexAttribxx’ has not been > declared > this I've not seen before this round of trying to build rc3 > I would like to find the cause of this. > I've gone past any of the thing which allowed to build previously as the > build directory > jtsdk/wsjtx/ is deleted so each build is clean. > > I'd be interested if anyone else has had problems with Hardkernel products > (odroid ) C1+ or XU4 > Maybe time to find another computer for the shack > > > On Tue, 6 Dec 2016 22:36:04 -0700 > KI7MT wrote: > > > All of the Launchpad builds (i386, amd64, ppc64el, and ARM) were > > successful. Here are the ARM build logs for Ubuntu 14.04.5: > > > > ARMv8 arm64: > > https://launchpad.net/~ki7mt/+archive/ubuntu/wsjtx-next/+build/11530957 > > > > ARMv7 armhf: > > https://launchpad.net/~ki7mt/+archive/ubuntu/wsjtx-next/+build/11530958 > > > > The builds also passed on Xenial (16.04) and Yakkety (16.10) > > > > > > 73's > > Greg, KI7MT > > > > > > On 12/06/2016 09:43 PM, Richard Shaw wrote: > > > As another data point, here's a successful build of rc3 on Fedora Rawhide > > > (future f26) on the arm7vhl target which built... > > > > > > http://koji.fedoraproject.org/koji/taskinfo?taskID=16780515 > > > > > > You can use that link to inspect the build logs. > > > > > > Thanks, > > > Richard > > > > -- > > Developer Access Program for Intel Xeon Phi Processors > > Access to Intel Xeon Phi processor-based developer platforms. > > With one year of Intel Parallel Studio XE. > > Training and support from Colfax. > > Order your platform today.http://sdm.link/xeonphi > > ___ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > -- -- Best wishes /73 Richard Bown Email : rich...@g8jvm.com HTTP : http://www.g8jvm.com nil carborundum a illegitemis ## Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W & 3cms 5W Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 400W, 70cms 200W OS: Linux Mint 18 x86_64 on a Dell Inspiron N5030 laptop ## -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
Hi Greg I dont doubt the rc3 builds are OK, I downloaded your build for armhf this morning and it runs. All I get reported on startup is unable to initialise openGLfor RasterGLSurface, reverting to RasterSurface and buffer under runs. Back to my attempts to build on the beast from Korea It differs from the Raspbery Pi and clones with the hardware and the drivers are propriety , and I suspect this is where the problem lie. On the two errors on the build its throwing up 10+ opengl errors like /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2138:5: error:‘::glVertexAttribPointer’ has not been declared ::glVertexAttribPointer(indx, size, type, normalized, stride, ptr); Always where a ::glVertexAttribxx’ has not been declared this I've not seen before this round of trying to build rc3 I would like to find the cause of this. I've gone past any of the thing which allowed to build previously as the build directory jtsdk/wsjtx/ is deleted so each build is clean. I'd be interested if anyone else has had problems with Hardkernel products (odroid ) C1+ or XU4 Maybe time to find another computer for the shack On Tue, 6 Dec 2016 22:36:04 -0700 KI7MT wrote: > All of the Launchpad builds (i386, amd64, ppc64el, and ARM) were > successful. Here are the ARM build logs for Ubuntu 14.04.5: > > ARMv8 arm64: > https://launchpad.net/~ki7mt/+archive/ubuntu/wsjtx-next/+build/11530957 > > ARMv7 armhf: > https://launchpad.net/~ki7mt/+archive/ubuntu/wsjtx-next/+build/11530958 > > The builds also passed on Xenial (16.04) and Yakkety (16.10) > > > 73's > Greg, KI7MT > > > On 12/06/2016 09:43 PM, Richard Shaw wrote: > > As another data point, here's a successful build of rc3 on Fedora Rawhide > > (future f26) on the arm7vhl target which built... > > > > http://koji.fedoraproject.org/koji/taskinfo?taskID=16780515 > > > > You can use that link to inspect the build logs. > > > > Thanks, > > Richard > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today.http://sdm.link/xeonphi > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- -- Best wishes /73 Richard Bown Email : rich...@g8jvm.com HTTP : http://www.g8jvm.com nil carborundum a illegitemis ## Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W & 3cms 5W Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 400W, 70cms 200W OS: Linux Mint 18 x86_64 on a Dell Inspiron N5030 laptop ## -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
All of the Launchpad builds (i386, amd64, ppc64el, and ARM) were successful. Here are the ARM build logs for Ubuntu 14.04.5: ARMv8 arm64: https://launchpad.net/~ki7mt/+archive/ubuntu/wsjtx-next/+build/11530957 ARMv7 armhf: https://launchpad.net/~ki7mt/+archive/ubuntu/wsjtx-next/+build/11530958 The builds also passed on Xenial (16.04) and Yakkety (16.10) 73's Greg, KI7MT On 12/06/2016 09:43 PM, Richard Shaw wrote: > As another data point, here's a successful build of rc3 on Fedora Rawhide > (future f26) on the arm7vhl target which built... > > http://koji.fedoraproject.org/koji/taskinfo?taskID=16780515 > > You can use that link to inspect the build logs. > > Thanks, > Richard -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
Hi Richard, I've no doubt the builds are working properly. I'm running RC3 on Ubuntu 14.04.5 right now. I sent the package to Launchpad and it's building there properly also. There hasn't been a build failure in over 360+ builds, so I am confident things are OK with the package. The ARM builds (v8 amd64, v7 armhf and armel) are still building, when they are done I'll post the build log links (for what its worth), but, I don't think there will be any issues. 73's Greg, KI7MT On 12/06/2016 09:43 PM, Richard Shaw wrote: > As another data point, here's a successful build of rc3 on Fedora Rawhide > (future f26) on the arm7vhl target which built... > > http://koji.fedoraproject.org/koji/taskinfo?taskID=16780515 > > You can use that link to inspect the build logs. > > Thanks, > Richard > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
As another data point, here's a successful build of rc3 on Fedora Rawhide (future f26) on the arm7vhl target which built... http://koji.fedoraproject.org/koji/taskinfo?taskID=16780515 You can use that link to inspect the build logs. Thanks, Richard -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
Hi Richard, I agree with Bill on this. The problem appears to the same as you had before. I have the Lanchpad version of RC3 ready to posted, but that is not solving the problem at hand. Are you sure you followed the steps / process posted in: https://sourceforge.net/p/wsjt/mailman/message/35014724/ I have added all the required build dependencies to all the JTSDK Meta Pakcages and the WSJTX-NEXT package on Launchpad. If the package builds properly on Launchpad, that clearly indicates a problem on the local build platform, e.g. your installation. As a side note, I've also built WSJT-X using Pbuilder (Debian / Ubuntu bootstrap image) on my Linux workstation without error. To my knowledge, there has been no changes from RC2 to RC3 that would be casing this problem. I do not believe this to be a problem WSJT-X, nor with the JTSDK build scripts. You have to remember, the JTSDK bash scripts are nothing more than a "very thin layer" between the user and required Cmake commands to build WSJTX. If your package dependencies are correct, you could easily perform the same or similar build commands manually on the command line. JTSDK is not required, in any capacity, to build WSJT-X on any platform. 73's Greg, KI7MT On 12/6/2016 5:48 PM, Richard Bown wrote: > more info > > I'm getting many errors like this on building:- > /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2138:5: error: > ‘::glVertexAttribPointer’ has not been declared > ::glVertexAttribPointer(indx, size, type, normalized, stride, ptr); > > I've loaded all qt5 libs, all fitting vertex* all *libgl* all *gles* , about > 800 MB , its not > playing !! > before each build jtsdk/wsjtx is deleted so its a clean build. > Guess I'll have to wait until Greg builds an ARMhf rc3 > This is not going to build on the odroid xu4 without some magic applied > > > > On Tue, 6 Dec 2016 23:26:36 + > Richard Bown wrote: > >> this is not responding to deleting all previous builds and gar/ >> >> tried that several times :( >> >> >> On Tue, 6 Dec 2016 21:49:32 + >> Bill Somerville wrote: >> >>> On 06/12/2016 21:29, Richard Bown wrote: I suspect the problem may be with opengl comparing between the two machine, on the ARM I get many jopengl errors >>> Hi Richard, >>> >>> this seems to be a re-run of this thread: >>> >>> https://sourceforge.net/p/wsjt/mailman/wsjt-devel/thread/20160414184913.209df085.richard%40g8jvm.com/#msg35014162 >>> >>> that seemed to be cleared up by some clean up and re-building. >>> >>> 73 >>> Bill >>> G4WJS. >>> >>> >>> -- >>> Developer Access Program for Intel Xeon Phi Processors >>> Access to Intel Xeon Phi processor-based developer platforms. >>> With one year of Intel Parallel Studio XE. >>> Training and support from Colfax. >>> Order your platform today.http://sdm.link/xeonphi >>> ___ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> > > -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
more info I'm getting many errors like this on building:- /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2138:5: error: ‘::glVertexAttribPointer’ has not been declared ::glVertexAttribPointer(indx, size, type, normalized, stride, ptr); I've loaded all qt5 libs, all fitting vertex* all *libgl* all *gles* , about 800 MB , its not playing !! before each build jtsdk/wsjtx is deleted so its a clean build. Guess I'll have to wait until Greg builds an ARMhf rc3 This is not going to build on the odroid xu4 without some magic applied On Tue, 6 Dec 2016 23:26:36 + Richard Bown wrote: > this is not responding to deleting all previous builds and gar/ > > tried that several times :( > > > On Tue, 6 Dec 2016 21:49:32 + > Bill Somerville wrote: > > > On 06/12/2016 21:29, Richard Bown wrote: > > > I suspect the problem may be with opengl > > > comparing between the two machine, on the ARM I get many jopengl errors > > > > > > > Hi Richard, > > > > this seems to be a re-run of this thread: > > > > https://sourceforge.net/p/wsjt/mailman/wsjt-devel/thread/20160414184913.209df085.richard%40g8jvm.com/#msg35014162 > > > > that seemed to be cleared up by some clean up and re-building. > > > > 73 > > Bill > > G4WJS. > > > > > > -- > > Developer Access Program for Intel Xeon Phi Processors > > Access to Intel Xeon Phi processor-based developer platforms. > > With one year of Intel Parallel Studio XE. > > Training and support from Colfax. > > Order your platform today.http://sdm.link/xeonphi > > ___ > > wsjt-devel mailing list > > wsjt-devel@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > -- -- Best wishes /73 Richard Bown Email : rich...@g8jvm.com HTTP : http://www.g8jvm.com nil carborundum a illegitemis ## Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W & 3cms 5W Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 400W, 70cms 200W OS: Linux Mint 18 x86_64 on a Dell Inspiron N5030 laptop ## -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
this is not responding to deleting all previous builds and gar/ tried that several times :( On Tue, 6 Dec 2016 21:49:32 + Bill Somerville wrote: > On 06/12/2016 21:29, Richard Bown wrote: > > I suspect the problem may be with opengl > > comparing between the two machine, on the ARM I get many jopengl errors > > Hi Richard, > > this seems to be a re-run of this thread: > > https://sourceforge.net/p/wsjt/mailman/wsjt-devel/thread/20160414184913.209df085.richard%40g8jvm.com/#msg35014162 > > that seemed to be cleared up by some clean up and re-building. > > 73 > Bill > G4WJS. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today.http://sdm.link/xeonphi > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- -- Best wishes /73 Richard Bown Email : rich...@g8jvm.com HTTP : http://www.g8jvm.com nil carborundum a illegitemis ## Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W & 3cms 5W Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 400W, 70cms 200W OS: Linux Mint 18 x86_64 on a Dell Inspiron N5030 laptop ## -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
On 06/12/2016 21:29, Richard Bown wrote: > I suspect the problem may be with opengl > comparing between the two machine, on the ARM I get many jopengl errors Hi Richard, this seems to be a re-run of this thread: https://sourceforge.net/p/wsjt/mailman/wsjt-devel/thread/20160414184913.209df085.richard%40g8jvm.com/#msg35014162 that seemed to be cleared up by some clean up and re-building. 73 Bill G4WJS. -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
Hi Bill I was building with jtsdk I suspect the problem may be with opengl comparing between the two machine, on the ARM I get many jopengl errors:- /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib1f(GLuint, GLfloat)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2050:5: error: ‘::glVertexAttrib1f’ has not been declared ::glVertexAttrib1f(indx, x); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib1fv(GLuint, const GLfloat*)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2061:5: error: ‘::glVertexAttrib1fv’ has not been declared ::glVertexAttrib1fv(indx, values); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib2f(GLuint, GLfloat, GLfloat)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2072:5: error: ‘::glVertexAttrib2f’ has not been declared ::glVertexAttrib2f(indx, x, y); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib2fv(GLuint, const GLfloat*)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2083:5: error: ‘::glVertexAttrib2fv’ has not been declared ::glVertexAttrib2fv(indx, values); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib3f(GLuint, GLfloat, GLfloat, GLfloat)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2094:5: error: ‘::glVertexAttrib3f’ has not been declared ::glVertexAttrib3f(indx, x, y, z); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib3fv(GLuint, const GLfloat*)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2105:5: error: ‘::glVertexAttrib3fv’ has not been declared ::glVertexAttrib3fv(indx, values); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib4f(GLuint, GLfloat, GLfloat, GLfloat, GLfloat)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2116:5: error: ‘::glVertexAttrib4f’ has not been declared ::glVertexAttrib4f(indx, x, y, z, w); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttrib4fv(GLuint, const GLfloat*)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2127:5: error: ‘::glVertexAttrib4fv’ has not been declared ::glVertexAttrib4fv(indx, values); ^ /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h: In member function ‘void QOpenGLFunctions::glVertexAttribPointer(GLuint, GLint, GLenum, GLboolean, GLsizei, const void*)’: /usr/include/arm-linux-gnueabihf/qt5/QtGui/qopenglfunctions.h:2138:5: error: ‘::glVertexAttribPointer’ has not been declared ::glVertexAttribPointer(indx, size, type, normalized, stride, ptr); ^ CMakeFiles/wsjt_qt.dir/build.make:842: recipe for target 'CMakeFiles/wsjt_qt.dir/SampleDownloader.cpp.o' failed make[2]: *** [CMakeFiles/wsjt_qt.dir/SampleDownloader.cpp.o] Error 1 CMakeFiles/Makefile2:292: recipe for target 'CMakeFiles/wsjt_qt.dir/all' failed make[1]: *** [CMakeFiles/wsjt_qt.dir/all] Error 2 Makefile:149: recipe for target 'all' failed make: *** [all] Error 2 make run in ~/jtsdk/wsjtx/gar/wsjtx-1.7.0-rc3/build/Release$ HTH Thanks On Tue, 6 Dec 2016 21:01:51 + Bill Somerville wrote: > On 06/12/2016 16:28, Richard Bown wrote: > > Yes, that got me past that stage but I've hit problems further on > > when building UDPEamples > > > > [ 78%] Linking CXX executable udp_daemon > > CMakeFiles/message_aggregator.dir/build.make:163: recipe for target > > 'CMakeFiles/message_aggregator.dir/UDPExamples/ClientWidget.cpp.o' failed > > make[2]: *** > > [CMakeFiles/message_aggregator.dir/UDPExamples/ClientWidget.cpp.o] Error 1 > > CMakeFiles/Makefile2:599: recipe for target > > 'CMakeFiles/message_aggregator.dir/all' failed > > make[1]: *** [CMakeFiles/message_aggregator.dir/all] Error 2 [ 78%] Built > > target udp_daemon > > Makefile:149: recipe for target 'all' failed > > make: *** [all] Error 2 > > Hi Richard, > > it looks like you are giving a -j option to your build command, that is > fine for fast builds but does not help with getting sequential output > with the error at the end. Try the build command again without any -j or > -k options and report back the last few tens of lines of output. > > 73 > Bill > G4WJS. > > > -- > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform
Re: [wsjt-devel] problem compiling 1.7.0 rc 3 on ARM
Hi that line is @$(CMAKE_COMMAND) -E cmake_echo_color --switch=$(COLOR) --green --progress-dir=/home/odroid/jtsdk/wsjtx/gar/wsjtx-1.7.0-rc3/build/Release/CMakeFiles --progres /usr/bin/c++ $(CXX_DEFINES) $(CXX_INCLUDES) $(CXX_FLAGS) -include wsjtx_config.h -o CMakeFiles/wsjt_qt.dir/SampleDownloader.cpp.o -c /home/odroid/jtsdk/src Unfortunately none the wiser from that :( On Tue, 6 Dec 2016 13:43:10 -0600 Richard Shaw wrote: > On Tue, Dec 6, 2016 at 1:19 PM, Richard Bown wrote: > > > Hi Richard > > I tried that and just got a no rule to make error > > I ran make -d , but not a lot of use, and I found nothing in the CMake log > > , so stuck with this error > > > > Reaping losing child 0x165c98 PID 27847 > > CMakeFiles/wsjt_qt.dir/build.make:842: recipe for target > > 'CMakeFiles/wsjt_qt.dir/SampleDownloader.cpp.o' failed > > make[2]: *** [CMakeFiles/wsjt_qt.dir/SampleDownloader.cpp.o] Error 1 > > > Ok, it may be a makefile error rather than a compile error then, you'll > have to follow the rabbit trail into CMakeFiles/wsjt_qt.dir/build.make and > look on line 842 and see if you can figure out what's going wrong. > > Thanks, > Richard -- -- Best wishes /73 Richard Bown Email : rich...@g8jvm.com HTTP : http://www.g8jvm.com nil carborundum a illegitemis ## Ham Call: G8JVM . QRV: 50-432 MHz + Microwave 23 cms 140W, 13 cms 100W & 3cms 5W Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV VHF 6mtrs 200W, 4 mtrs 150W, 2mtrs 400W, 70cms 200W OS: Linux Mint 18 x86_64 on a Dell Inspiron N5030 laptop ## -- Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today.http://sdm.link/xeonphi ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel