[XFree86] Problems with graphics chipset 852GM/855GM and LCD wide screen
Hi all, I've a notebook with Intel graphics chipset 852GM/855GM and a widescreen LCD with resolution 1280x800. Under mandrake 9.2 the HW is recognized as i810 and it's work but I can't set the resolution mode 1280x800 even if I define it as Modeline option. I've tried all possible configuration came up in my mind I've attacched both Log and XF86Config-4 files. Any suggestion would be very appreciated. Davide # File generated by XFdrake. # ** # Refer to the XF86Config man page for details about the format of # this file. # ** Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "unix/:-1" EndSection Section "ServerFlags" AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZap # disable (server abort) #DontZoom # disable / (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer Load "dri" # direct rendering EndSection Section "DRI" Mode 0666 EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "it" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "PS/2" Option "Device" "/dev/psaux" Option "Emulate3Buttons" Option "Emulate3Timeout" "50" EndSection Section "Monitor" Identifier "monitor1" VendorName "Generic" ModelName "Flat Panel 1024x768" HorizSync 31.5-57 VertRefresh 40-70 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480"65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 Mode "1280x800_60.00" # 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz DotClock 83.46 HTimings 1280 1344 1480 1680 VTimings 800 801 804 828 Flags"-HSync" "+Vsync" EndMode # 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz #Modeline "1280x800_60.00" 83.46 1280 1344 1480 1680 800 801 804 828 -HSync +Vsync EndSection Section "Device" Identifier "device1" VendorName "Intel Corporation" BoardName "Intel 85x" Driver "i810" BusID "PCI:0:2:0" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 16 Subsection "Display" Depth 8 EndSubsection Subsection "Display" Depth 15 EndSubsection Subsection "Display" Depth 16 Modes "1280x800_60.00" EndSubsection Subsection "Display" Depth 24 Modes "1280x800_60.00" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" EndSection XFree86 Version 4.3.0 Release Date: 9 May 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF] Build Date: 10 September 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Thu Nov 27 12:59:51 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "layout1" (**) |-->Screen "screen1" (0) (**) | |-->Monitor "monitor1" (**) | |-->Device "device1" (**) |-->Input Device "Keyboard1" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "it" (**) XKB: layout: "it" (WW) Option "XkbOptions" requires an string value (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Mouse1" (**) FontPath set to "unix/:-1" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" Using vt 7 (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Rende
[XFree86] Re: I need help setting up my video card
On Wed, 26 Nov 2003, Andrew Lester wrote: >Date: Wed, 26 Nov 2003 18:38:49 -0600 >From: Andrew Lester <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Reply-To: [EMAIL PROTECTED] >Content-Type: text/plain; charset=ISO-8859-1; format=flowed >Subject: I need help setting up my video card > >Hi, I am using Red Hat Linux 9 with Xfree86 4.3 and I have a VisionTek >Xtasy 9200 SE 128mb PCI video card, and there are no VisionTek video >cards, and VisionTek dosn't make drivers for linux. So I am forced to >use my crappy Intel 845 video card, and I can't play UT2003 with it. so >If you could point me to drivers to it or put them in the upcoming >release of Xfree86 I would greatly appreciate it. Radeon PCI hardware is supported only experimentally with 3D in XFree86 4.3.0. It works for some people and not at all for others. It isn't clear what the problems are, and nobody is working on it currently, however volunteers are always welcome to try to pinpoint the problems on their systems. You need to enable ForcePCIMode for it to work at all. Be sure you are running the latest updates that have just been made available via up2date or ftp also. -- Mike A. Harris ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Problems getting Matrox G250 work with Xfree on Debian. Help Needed
Hi I am using a XFree on a debian unix machine. The Graphic card that I am having is Matrox G250 AGP card. When I install XFree on this machine it works fine. But when I start XFree using startx it gives a blank screen and startx does not work. Please help me in getting the Matrox G250 AGP card with XFree. I am attaching the XFree I am attaching the Xfree log file and the XF86-Config-4 files. Please have a look at it and lemme know what I need to do. Please help me in getting this working. Please lemme know if there is any patch that I can use. I also tried using XFree4.3 too but still does not work. Thanks Abhijit XFree Log file --- This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.20-8um i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Sun Nov 23 19:48:25 2003 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Generic Monitor" (**) | |-->Device "Generic Video Card" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc104" (**) XKB: model: "pc104" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (**) |-->Input Device "Generic Mouse" (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (WW) Cannot open APM (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a21 card , rev 01 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a23 card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 8086,1a24 card , rev 01 class 06,04,00 hdr 01 (II) PCI: 00:1e:0: chip 8086,2418 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,2410 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00 (II) PCI: 01:05:0: chip 1013,6003 card 103c,124d rev 01 class 04,01,00 hdr 00 (II) PCI: 01:0b:0: chip 1113,1211 card 103c,9207 rev 10 class 02,00,00 hdr 00 (II) PCI: 02:1f:0: chip 8086,1360 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 03:00:0: chip 8086,1161 card 8086,1161 rev 01 class 08,00,20 hdr 80 (II) PCI: 03:09:0: chip 9005,008f card 103c,1241 rev 02 class 01,00,00 hdr 00 (II) PCI: 04:00:0: chip 102b,0521 card 102b,ca6c rev 03 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge:
Re: [XFree86] server not starting
HI alok This could mean a lot of things. This happend to me before twice. The first time it works when I commented out the line in /etc/X11/XF86Config that dealt with FontPath The second time my permissions on the /tmp folder were wrong. Oh GOD! I don't want to remember those days . The worst in my life. I finally decided to reinstall Redhat linux 7.1! Christopher Thom wrote: > Quoth alok bansal: > > > Could not init font path element Unix/:7100, removing from list! > > > > Fatal server error: > > could not open default font 'fixed' > > make sure xfs (the font server) is started before you try to start X. > This can usually be accompanied by making sure /etc/init.d/xfs start is > called before xdm. > > on a debian system, you just make sure there is a link from > /etc/rc5.d/S90xfs to /etc/init.d/xfs. Dunno how redhat does it though... > > cheers > chris > -- > - > | | > | TELESCOPE, n.| > | A device having a relation to the eye similar to that of the | > | telephone to the ear, enabling distant objects to plague us with a | > | multitude of needless details. Luckily it is unprovided with a bell | > | summoning us to the sacrifice. | > | -- Ambrose Bierce, "The Devil's Dictionary" | > | | > - > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] ATI FireGL4 drivers
GS HUNT wrote: My first choice would to use the dirivers supplied by Xfree.. Xfree 4.3.0 has support for 3d ATI Drivers...which are almost as fast as the ATI binaries... not to mention they are more stable.. However if you really need the ATI binaries... try downloading 3.2.8 fglrx drivers...which seemed to be the unified driver for many of the ATI cards.. hopefully it will be compatible. http://www2.ati.com/drivers/firegl/fglrx-glc22-4.3.0-3.2.8.i586.rpm If you don't have a precompiled matching kernel module... you will have to have kernel source so it can link its binaries correctly. The drivers you mention are for the Radeon based FireGL cards. Lloyd was asking about the older pre-Radeon based FireGL cards. There are *no* drivers in the XFree86 source tree for those cards. The two chip families are as different as x86 and PowerPC. :) On November 26, 2003 04:09 pm, Lloyd A Treinish wrote: Does anyone know if a driver for the ATI FireGL4 card suitable for XFree86 4.3.0 and the 2.4.20-18.9 kernel (RedHat 9) is available? The latest driver (11/26/2002) from ATI (binary only) does not work (a whole list of incompatibilities). It was built for XFree86 4.2.0 and libc 6.2 (glibc 2.2). ATI does provide newer drivers, but only for their newer cards. Those drivers don't appear to work either with this older card. Thanks. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] I need help setting up my video card
Hi, I am using Red Hat Linux 9 with Xfree86 4.3 and I have a VisionTek Xtasy 9200 SE 128mb PCI video card, and there are no VisionTek video cards, and VisionTek dosn't make drivers for linux. So I am forced to use my crappy Intel 845 video card, and I can't play UT2003 with it. so If you could point me to drivers to it or put them in the upcoming release of Xfree86 I would greatly appreciate it. Best regards, Andrew Lester ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] server not starting
Quoth alok bansal: > Could not init font path element Unix/:7100, removing from list! > > Fatal server error: > could not open default font 'fixed' make sure xfs (the font server) is started before you try to start X. This can usually be accompanied by making sure /etc/init.d/xfs start is called before xdm. on a debian system, you just make sure there is a link from /etc/rc5.d/S90xfs to /etc/init.d/xfs. Dunno how redhat does it though... cheers chris -- - | | | TELESCOPE, n.| | A device having a relation to the eye similar to that of the | | telephone to the ear, enabling distant objects to plague us with a | | multitude of needless details. Luckily it is unprovided with a bell | | summoning us to the sacrifice. | | -- Ambrose Bierce, "The Devil's Dictionary" | | | - ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] error when building mesa
That problem looks like a compiler problem... your compiler doesn't support pII tuning... Try getting a newer c++ compiler.. Gary On November 26, 2003 09:33 pm, Peppe wrote: > This is what I get: > > Make[5]: Entering directory `/home/giuseppe/cvs/build/lib/GL/mesa/src/X86' > rm -f common_x86_asm.i > cpp -Dlinux -D__i386__ -D_POSIX_C_SOURCE=199309L > -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE > -D_GNU_SOURCE-D__ELF__ -DMALLOC_0_RETURNS_NULL > -DGLXEXT -DXF86DRI -DGLX_DIRECT_RENDERING -DGLX_USE_DLOPEN -DGLX_USE_MESA > -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM > -I../../../../../exports/include -I../../../../../include/extensions > -I../../../../../extras/Mesa/src > -I../../../../../extras/Mesa/src/X86 -I../../../include common_x86_asm.S > | \ > grep -v '^\#' > common_x86_asm.i > cc1: error: invalid option `tune=pentiumpro' > make[5]: *** [common_x86_asm.o] Error 1 > > Please help me! > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] XClient Doubt
Dear Sirs Whenever I made login in the XFree86 is showed the Ice Worm as interface. I would like to know how can I alter the interface standard to Kde or Gnome. Thank you very much
Re: [XFree86] ATI FireGL4 drivers
My first choice would to use the dirivers supplied by Xfree.. Xfree 4.3.0 has support for 3d ATI Drivers...which are almost as fast as the ATI binaries... not to mention they are more stable.. However if you really need the ATI binaries... try downloading 3.2.8 fglrx drivers...which seemed to be the unified driver for many of the ATI cards.. hopefully it will be compatible. http://www2.ati.com/drivers/firegl/fglrx-glc22-4.3.0-3.2.8.i586.rpm If you don't have a precompiled matching kernel module... you will have to have kernel source so it can link its binaries correctly. Gary On November 26, 2003 04:09 pm, Lloyd A Treinish wrote: > Does anyone know if a driver for the ATI FireGL4 card suitable for XFree86 > 4.3.0 and the 2.4.20-18.9 kernel (RedHat 9) is available? The latest > driver (11/26/2002) from ATI (binary only) does not work (a whole list of > incompatibilities). It was built for XFree86 4.2.0 and libc 6.2 (glibc > 2.2). ATI does provide newer drivers, but only for their newer cards. > Those drivers don't appear to work either with this older card. > > Thanks. > > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 9000 and XV
George Socker wrote: OK, I tried changing it and rebuilding. It didn't fix it. The WinXP driver doesn't have any problems, though. I can send you some video, XP might use some "Direct Draw" YUV-Blit stuff instead of the video overlay. but files are very large(285MB) for just a couple of minutes. On Tuesday, November 25 2003 09:45 am, Alex Deucher wrote: I noticed that the other night as I was working on the driver, but I didn't have any content large enough to test it with. I think it might be a hold over from the old r128 driver. switch it to 2048x2048 and give it a shot. It shouldn't hurt anything. If it works we can submit a patch to get it fixed in future releases. Alex Hello. I have a HD-2000 HDTV PCI card. When using the XVideo extension to display HDTV format video, the right third of the image is a pink bar. This looks very much like the overlay simply isn't capable of that size. Especially if the pitch is OK (read: the remaining contents of the video is displayed in order). It could very well be that the overlay can only deal with videos <= 1280 in horizontal size. I don't know anything about radeon hardware, but on some other hardware, there sometimes exists a register for the line buffer length (or FIFO size or the like). Perhaps such a thing exists on the radeon, and needs adjustment for larger videos. Other issues that usually influence the overlay capabilities are dot clock and display resolution. However, in such cases, overlays mostly show a different effect, like flashing dots, rather than missing areas. >>I have looked through the driver source and noticed that although the maximum image size in radeon_video.c is 2048x2048 , the offscreen image size is limited to 1024x1024. Is this likely the cause of the problem? If so, will it cause problems if I change it to 2048x2048? I have a Radeon 9000 with 64MB ram, and am running X at 1152x864 @ 75HZ. Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Radeon 9000 and XV
OK, I tried changing it and rebuilding. It didn't fix it. The WinXP driver doesn't have any problems, though. I can send you some video, but files are very large(285MB) for just a couple of minutes. On Tuesday, November 25 2003 09:45 am, Alex Deucher wrote: > I noticed that the other night as I was working on the driver, but I > didn't have any content large enough to test it with. I think it > might be a hold over from the old r128 driver. switch it to > 2048x2048 and give it a shot. It shouldn't hurt anything. If it > works we can submit a patch to get it fixed in future releases. > > Alex > Hello. > > I have a HD-2000 HDTV PCI card. When using the XVideo extension to > display HDTV format video, the right third of the image is a pink > bar. I have looked through the driver source and noticed that > although the maximum image size in radeon_video.c is 2048x2048 , the > offscreen image > > size is limited to 1024x1024. Is this likely the cause of the > problem? If so, will it cause problems if I change it to 2048x2048? I > have a Radeon 9000 with 64MB ram, and am running X at 1152x864 @ > 75HZ. > pgp0.pgp Description: signature
[XFree86] Help !!!
Hello, I´ im writing you from Barcelona, Spain. I have some trouble installing "X" in my linux system (Mandrake 9.1), based on a Pentium IV, with an ATI Radeon 7000 Card and a LG Studioworks 700S monitor. I have 512 Mb of memory, with a 80 GB hard disc, who is half-used by Windows XP and Linux. I´ m not a linux expert and I don´ t understand where is the problem. I send you my /etc/X1/XF86Config-4 file and the log file : /var/log/Xfree86.0.log. Thank you for all. Francisco Martínez Xfree86.0.log Description: Binary data XF86Config-4 Description: Binary data
Re: [XFree86] Installation failed couldn't find pam_appl.h
Joshua Brickel schrieb: Hi, When I tried to install Xfree86 version 4.3 the installation failed with a message that it could not find the pam_appl.h file. I am using debian 3.0. I was wondering if anyone knows what library this is connected to and where I would get the files that are needed. [EMAIL PROTECTED]:~$ apt-cache search pam libpam0g-dev - Development files for PAM Thanks, Joshua Brickel AlphaCell Wireless System Validation, Team Leader 22 Zarhin St. Industrial Area, Raanana, 43662 Israel Tel: +972-9-769-9836 Fax: +972-9-769-9665 Shalom! wij ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] error when building mesa
This is what I get: Make[5]: Entering directory `/home/giuseppe/cvs/build/lib/GL/mesa/src/X86' rm -f common_x86_asm.i cpp -Dlinux -D__i386__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE-D__ELF__ -DMALLOC_0_RETURNS_NULL -DGLXEXT -DXF86DRI -DGLX_DIRECT_RENDERING -DGLX_USE_DLOPEN -DGLX_USE_MESA -DUSE_X86_ASM -DUSE_MMX_ASM -DUSE_3DNOW_ASM -DUSE_SSE_ASM -I../../../../../exports/include -I../../../../../include/extensions -I../../../../../extras/Mesa/src-I../../../../../extras/Mesa/src/X86 -I../../../include common_x86_asm.S | \ grep -v '^\#' > common_x86_asm.i cc1: error: invalid option `tune=pentiumpro' make[5]: *** [common_x86_asm.o] Error 1 Please help me! ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Tekbul internet Rehberi - iyi bayramlar.!
Tüm islam aleminin Ramazan bayrami kutlu olsun.! Beraber nice bayramlara ... TEKBUL.COM Administrator http://www.tekbul.com --- Tekbul internet Rehberi ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Call India for 0.1995 Pakistan for 0.25
Title: Sohna Watan You have received this email because you have signed up on our website or one of our affiliates to receive discounts of up to 80% on everything from software to cars. If you wish to be excluded from our service please visit our website and we will be glad to take you off.
Re: [XFree86] ATI FireGL4 drivers
On Wed, Nov 26, 2003 at 11:09:33AM -0500, Lloyd A Treinish wrote: > Does anyone know if a driver for the ATI FireGL4 card suitable for XFree86 > 4.3.0 and the 2.4.20-18.9 kernel (RedHat 9) is available? The latest > driver (11/26/2002) from ATI (binary only) does not work (a whole list of > incompatibilities). It was built for XFree86 4.2.0 and libc 6.2 (glibc > 2.2). ATI does provide newer drivers, but only for their newer cards. > Those drivers don't appear to work either with this older card. We have no idea what ATI's own drivers do or do not support. Your best contacting ATI. Alan. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Installation failed couldn't find pam_appl.h
Hi, When I tried to install Xfree86 version 4.3 the installation failed with a message that it could not find the pam_appl.h file. I am using debian 3.0. I was wondering if anyone knows what library this is connected to and where I would get the files that are needed. Thanks, Joshua Brickel AlphaCell Wireless System Validation, Team Leader 22 Zarhin St. Industrial Area, Raanana, 43662 Israel Tel: +972-9-769-9836 Fax: +972-9-769-9665
[XFree86] Tekbul internet Rehberi - iyi bayramlar.!
Tüm islam aleminin Ramazan bayrami kutlu olsun.! Beraber nice bayramlara ... TEKBUL.COM Administrator http://www.tekbul.com --- Tekbul internet Rehberi ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] ATI FireGL4 drivers
Does anyone know if a driver for the ATI FireGL4 card suitable for XFree86 4.3.0 and the 2.4.20-18.9 kernel (RedHat 9) is available? The latest driver (11/26/2002) from ATI (binary only) does not work (a whole list of incompatibilities). It was built for XFree86 4.2.0 and libc 6.2 (glibc 2.2). ATI does provide newer drivers, but only for their newer cards. Those drivers don't appear to work either with this older card. Thanks. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Upgraded to Xfree86 4.3 and now it cannot open glide2x
Hi All, I am working with a graphics card i82865G and to have the drivers I upgraded to 4.3 (from 4.2). When I try to configure it I get the error from logfile: (II) LoadModule: "glide" (II) Loading /usr/X11R6/lib/modules/drivers/glide_drv.o (II) Module glide: vendor="The XFree86 Project"  compiled for 4.3.0, module version = 1.0.0  Module class: XFree86 Video Driver  ABI class: XFree86 Video Driver, version 0.6 (II) Loading sub module "glide2x" (II) LoadModule: "glide2x" (WW) Warning, couldn't open module glide2x (II) UnloadModule: "glide2x" (EE) Glide driver: Could not load the shared library file for Glide: "libglide2x.so"! I did not find the file Âlibglide2x.so under usr/lib .. If I use SaX2 (from suse linux) I am able to reforce it to choose the grphics card Intel-> i830 but when I start the Xwindow it opens in grey background and it just hangs .. I then need to unplug the PC to be able to restart it. (not even Ctrl-Atl-del works) Attached is the logfile Any idea will be appreciated !! XFree86.0.log Description: Binary data
Re: [XFree86] problems with 2.6.0-test10 / xfree86 4.3.0
Hello Jodok. I'm not an expecialist on X-serever, but after see your XFree86.0.log, in the end, it say you: > Could not init font path element /usr/X11R6/lib/X11/fonts/TTF, removing from list! > Could not init font path element /usr/X11R6/lib/X11/fonts/truetype, removing from list! So I believe that you try mont this fonts in the '/etc/X11/XF86Config-4', so firts remove it (or comment) . I sugest to, to update to XFree 4.3 if you didn't. regards Gustavo Jodok Batlogg wrote: sometimes (after working for a while) my x-server suddenly crashes i attached the logfile thanks! jodok ps.: i hope it's right to send such errormessages to you? XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-gentoo-r6 i686 [ELF] Build Date: 26 October 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Nov 26 14:01:51 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 0" (0) (**) | |-->Monitor "IBM ThinkPad TFT" (**) | |-->Device "ATI Radeon Mobility #0" (**) |-->Screen "Screen 1" (1) (**) | |-->Monitor "Sony SDM N50" (**) | |-->Device "ATI Radeon Mobility #1" (**) |-->Input Device "Trackpoint" (**) |-->Input Device "Bluetooth Mouse" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc102" (**) XKB: model: "pc102" (**) Option "XkbLayout" "de" (**) XKB: layout: "de" (**) Option "XkbVariant" "nodeadkeys" (**) XKB: variant: "nodeadkeys" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/TTF,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/ukr,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/Speedo" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "Xinerama" "on" (**) Xinerama: enabled Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000fd2c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card , rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,2482 card 1014,0220 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2484 card 1014,0220 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,2487 card 1014,0220 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card , rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 1014,0220 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,2483 card 1014,0220 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 1014,0508 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2486 card 1014,0227 rev 02 class 07,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c57 card 1014,0509 rev 00 class 03,00,00 hdr 00 (II) PCI: 02:00:0: chip 1180,0476 card 4000, rev 80 class 06,07,00 hdr 82 (II) PCI: 02:00:1: chip 1180,0476 card 4800, rev 80 class 06,07,00 hdr 82 (II) PCI: 02:02:0: chip 1260,3873 card 1668,0406 rev 01 class 02,80,00 hdr 00 (II) PCI: 02:08:0: chip 8086,1031 card 1014,0209 rev 42 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-p
[XFree86] Matrox Interlaced Mode?
Hello List! I've a Problem with my X Configuration. I want to switch my Matrox Millenium G200 Graphics Adapter into interlaced mode, but it won't do that. I try to connect a RGB-TFT Module (It's only a TFT Module, not a real Screen) to my Graphics Adapter as shown here: http://home1.gte.net/bs/sharp2.html Due to the fact that there are existing "modelines" for the MGA.MON file in WinXX I think that there also have to be working modelines for that in XFree, because i really don't want to run Win on this machine... I just need a TV-like RGB NTSC Output as shown here: http://www.sput.nl/hardware/tv-x.html And so i copied some modelines from there: http://www.unix-ag.uni-kl.de/~pfeffer/tvout/ an tried to get that work... But my X server doesn't like these modelines (bad mode click/ interlace/ doublescan). Whats wrong with it? My XF86Config (the necessary parts of it): Section "Monitor" Identifier "Monitor[0]" ModelName"LQ5AW116" VendorName "Sharp" modeline "ntsc_320x240" 6.04186 320 328 352 384 240 244 247 262 -hsync -vsync # H 15734 [Hz], V 60.0534 [Hz] modeline "ntsc_400x300" 7.55232 400 408 448 480 300 398 404 525 -hsync -vsync interlace # H 15734 [Hz], V 59.939 [Hz] modeline "ntsc_512x384" 9.69214 512 528 568 616 384 440 446 525 -hsync -vsync interlace # H 15734 [Hz], V 59.939 [Hz] modeline "ntsc_640x480" 12.2096 640 664 720 776 480 488 494 525 -hsync -vsync interlace # H 15734 [Hz], V 59.939 [Hz] modeline "ntsc_720x480" 13.72 720 744 808 872 480 488 494 525 -hsync -vsync interlace # H 15734 [Hz], V 59.939 [Hz] #modeline "ntsc_640x242" 12.7 640 656 744 808 242 246 251 264 -hsync -vsync interlace modeline "ntsc_320x242" 6.04186 320 328 352 384 242 245 248 262 -hsync -vsync # H 15734 [Hz], V 60.0534 [Hz] modeline "ntsc_640x484" 12.0837 640 656 704 768 484 490 496 525 -hsync -vsync interlace # H 15734 [Hz], V 59.939 [Hz] Modeline "[EMAIL PROTECTED]" 17.62 800 832 896 928 600 614 617 631 interlace EndSection Section "Device" BoardName"MGA G200 AGP" BusID"1:0:0" Driver "mga" Identifier "Device[0]" VideoRam 8192 VendorName "Matrox" EndSection Section "Screen" DefaultDepth 16 SubSection "Display" Depth 24 Modes "ntsc_320x240" "ntsc_400x300" "ntsc_512x384" "ntsc_640x480" "ntsc_720x480" "ntsc_320x242" "ntsc_640x484" EndSubSection SubSection "Display" Depth 16 Modes "[EMAIL PROTECTED]" "ntsc_320x240" "ntsc_400x300" "ntsc_512x384" "ntsc_640x480" "ntsc_720x480" "ntsc_320x242" "ntsc_640x484" EndSubSection SubSection "Display" Depth 8 Modes "ntsc_640x242" "ntsc_320x240" "ntsc_400x300" "ntsc_512x384" "ntsc_640x480" "ntsc_720x480" "ntsc_320x242" "ntsc_640x484" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection And the errorlog of the X-Server: (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400, mgag550 (--) Chipset mgag200 found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.3.0, module version = 0.1.0 (--) MGA(0): Chipset: "mgag200" (II) Loading /usr/X11R6/lib/modules/drivers/mga_hal_drv.o (II) Module mga_hal: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 (==) MGA(0): Matrox HAL module used (**) MGA(0): Depth 16, (--) framebuffer bpp 16 (==) MGA(0): RGB weight 565 (==) MGA(0): Using AGP 1x mode (--) MGA(0): Linear framebuffer at 0xE000 (--) MGA(0): MMIO registers at 0xDC00 (--) MGA(0): Pseudo-DMA transfer window at 0xDD00 (==) MGA(0): BIOS at 0xC (--) MGA(0): Video BIOS info block at offset 0x07A60 (--) MGA(0): Found and verified enhanced Video BIOS info block (**) MGA(0): VideoRAM: 8192 kByte (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.2.0 (==) MGA(0): Write-combining range (0xe000,0x80) (II) MGA(0): I2C bus "DDC" initialized. (II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C Monitor info: 0x8534c00 (II) MGA(0): Manufacturer: MAX Model: 1b6c Serial#: 16584 (II) MGA(0): Year: 1998 Week: 30 (II) MGA(0): EDID Version: 1.0 (II) MGA(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) MGA(0): Sync: Separate (II) MGA(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) MGA(0): Gamma: 1.50 (II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Disp
[XFree86] problems with 2.6.0-test10 / xfree86 4.3.0
sometimes (after working for a while) my x-server suddenly crashes i attached the logfile thanks! jodok ps.: i hope it's right to send such errormessages to you? -- jodok batlogg solution2u.net gmbh · hof 4 · a-6861 alberschwende fon +43 5579 85777-65 · fax -77 · mobil +43 699 11841546 http://solution2u.net/ · [EMAIL PROTECTED] have a nice day XFree86 Version 4.3.0 Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-gentoo-r6 i686 [ELF] Build Date: 26 October 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Nov 26 14:01:51 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 0" (0) (**) | |-->Monitor "IBM ThinkPad TFT" (**) | |-->Device "ATI Radeon Mobility #0" (**) |-->Screen "Screen 1" (1) (**) | |-->Monitor "Sony SDM N50" (**) | |-->Device "ATI Radeon Mobility #1" (**) |-->Input Device "Trackpoint" (**) |-->Input Device "Bluetooth Mouse" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc102" (**) XKB: model: "pc102" (**) Option "XkbLayout" "de" (**) XKB: layout: "de" (**) Option "XkbVariant" "nodeadkeys" (**) XKB: variant: "nodeadkeys" (==) Keyboard: CustomKeycode disabled (**) FontPath set to "/usr/X11R6/lib/X11/fonts/Type1,/usr/X11R6/lib/X11/fonts/misc,/usr/X11R6/lib/X11/fonts/75dpi,/usr/X11R6/lib/X11/fonts/100dpi,/usr/X11R6/lib/X11/fonts/TTF,/usr/X11R6/lib/X11/fonts/truetype,/usr/X11R6/lib/X11/fonts/ukr,/usr/X11R6/lib/X11/fonts/cyrillic,/usr/X11R6/lib/X11/fonts/Speedo" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "Xinerama" "on" (**) Xinerama: enabled Using vt 7 (--) using VT number 7 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x8000fd2c, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,1a30 card , rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,1a31 card , rev 04 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,2482 card 1014,0220 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,2484 card 1014,0220 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,2487 card 1014,0220 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card , rev 42 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,248c card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,248a card 1014,0220 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,2483 card 1014,0220 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,2485 card 1014,0508 rev 02 class 04,01,00 hdr 00 (II) PCI: 00:1f:6: chip 8086,2486 card 1014,0227 rev 02 class 07,03,00 hdr 00 (II) PCI: 01:00:0: chip 1002,4c57 card 1014,0509 rev 00 class 03,00,00 hdr 00 (II) PCI: 02:00:0: chip 1180,0476 card 4000, rev 80 class 06,07,00 hdr 82 (II) PCI: 02:00:1: chip 1180,0476 card 4800, rev 80 class 06,07,00 hdr 82 (II) PCI: 02:02:0: chip 1260,3873 card 1668,0406 rev 01 class 02,80,00 hdr 00 (II) PCI: 02:08:0: chip 8086,1031 card 1014,0209 rev 42 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x3000 - 0x30ff (0x100) IX[B]
[XFree86] Tekbul internet Rehberi - iyi bayramlar.!
Tüm islam aleminin Ramazan bayrami kutlu olsun.! Beraber nice bayramlara ... TEKBUL.COM Administrator http://www.tekbul.com --- Tekbul internet Rehberi ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Cannot start X server
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Nov 26 12:01:48 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "gb" (**) XKB: layout: "gb" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (++) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (WW) Warning, couldn't open module bitmap (II) UnloadModule: "bitmap" (EE) Failed to load module "bitmap" (module does not exist, 0) (II) LoadModule: "pcidata" (WW) Warning, couldn't open module pcidata (II) UnloadModule: "pcidata" (EE) Failed to load module "pcidata" (module does not exist, 0) Fatal server error: Unable to load required base modules, Exiting... I’m having a few problems as my RedHat 9 machine will not start X server anymore. Not sure what has caused the problem It is having problems loading the modules, when I looked in /usr/X11R6/lib I could not access the modules directory, it said there was an Input/Output Error. Something has got messed up, is there a simple way to reinstall X that could fix the problem? Thanks Stephen --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.543 / Virus Database: 337 - Release Date: 21/11/2003 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Re: Matrox G550 with one DVI, 1 CRT
On Wed, 26 Nov 2003, Stephen CS Howe wrote: > Hi, I found your very interesting XFree config file on the mailing list. > > Note:If you can't be bothered reading all this, just post me your latest > Xfre86config, and I will look at it for hints. > > I am trying to get my matrox dual -head card working with a Samsung > Syncmaster 191T FPD and a Philips 105S 19 inch CRT monitor. > I have got quite close, but my main problems stem from the fact that the > head allocation from the card is not clear, as it apparently > reconfigures the head allocation depending on what you connect to it. The card calls the DVI monitor head 0, if it finds it at power on, otherwise the VGA head is head 0. There is the config file Option "SwappedHead""true" which reverses the head allocation. > Anyway, I have a number of questions:- > 1Do I need Xinerama to spread my desktop across 2 monitors ? With the mga_drv.o driver from XFree86 yes. If I remember correctly, the XFree86 driver on the CD that comes with the card will do > 2Do I need DPI working to get my LCD monitor working ? If so, are > Xinerama and DPI mutually exclusive? DPI ? Do you mean DVI ? There shouldn't be a conflict between Xinerama and DVI. (The DVI socket will actually do DVI-A (analog) if you use the DVI->VGA adaptor; for some monitors the picture quality may be as good.) If you do mean DPI, as in dots-per-inch, yes there is a problem with dual-head setups. If you rely on DPMS to provide the server with the screen size, then the driver only asks the first head, and reports those values for both screens. I would recommend that you put a line like DisplaySize 376 301 # millimeters in each monitor section of the config file. The size doesn't have to be the correct one, it may be best to multiply the number of pixels on each screen by the DPI, so that both monitors report say 75 or 100 DPI. > 3. I have the following plan to discover good settings for my monitors:- > 1. Plug in monior one only, autoconfigure from redhat GUI and save > XFree86 config. > 2. Remove Monitor 1 and plug in monitor 2, then rerun redhat GUI to > configure second monitor. > 3. Plug in both monitors, cut n paste each monitor configs from > individual files, and add the bits necessary for dual head to my > xfree86config. > does this sound like a good plan for a no-brainer like myself ? Seems worth a try. -- Dr. Andrew C. Aitchison Computer Officer, DPMMS, Cambridge [EMAIL PROTECTED] http://www.dpmms.cam.ac.uk/~werdna ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: Where to put xinitrc? (Re: [XFree86] Can't get a 7-button mouse setup correctly.)
Hi Alon, it depends on which scripts are executed on X startup and in which order on your system. I have it in /etc/X11/xdm/Xstartup - I use SuSE Linux 8.2. You could put it also in /etc/X11/Xmodmap - here you would write only: pointer = 1 2 3 6 7 4 5 not full xmodmap -e "pointer = 1 2 3 6 7 4 5" Mind the spaces around equal sign. Another possibility is ~/.Xmodmap. Let me know what place works for you. Best regards, Jozef [EMAIL PROTECTED] On Wednesday 26 November 2003 09:21, Alon Weinstein wrote: > Hello all. > > After running xmodmap the scrollers work fine. However -- I can't > make xmodmap run automatically -- I've tried putting a line to run it > in ~/.xinitrc, and I still have to run it manually every time I start > an X session -- Is there some other place I should be putting it? > ___ > XFree86 mailing list > [EMAIL PROTECTED] > http://XFree86.Org/mailman/listinfo/xfree86 ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Matrox G550 with one DVI, 1 CRT
Hi, I found your very interesting XFree config file on the mailing list. Note:If you can't be bothered reading all this, just post me your latest Xfre86config, and I will look at it for hints. I am trying to get my matrox dual -head card working with a Samsung Syncmaster 191T FPD and a Philips 105S 19 inch CRT monitor. I have got quite close, but my main problems stem from the fact that the head allocation from the card is not clear, as it apparently reconfigures the head allocation depending on what you connect to it. Anyway, I have a number of questions:- 1Do I need Xinerama to spread my desktop across 2 monitors ? 2Do I need DPI working to get my LCD monitor working ? If so, are Xinerama and DPI mutually exclusive? 3. I have the following plan to discover good settings for my monitors:- 1. Plug in monior one only, autoconfigure from redhat GUI and save XFree86 config. 2. Remove Monitor 1 and plug in monitor 2, then rerun redhat GUI to configure second monitor. 3. Plug in both monitors, cut n paste each monitor configs from individual files, and add the bits necessary for dual head to my xfree86config. does this sound like a good plan for a no-brainer like myself ? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] server not starting
XFree86 Version 4.3.0 (Red Hat Linux release: 4.3.0-2) Release Date: 27 February 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.20-3bigmem i686 [ELF] Build Date: 27 February 2003 Build Host: porky.devel.redhat.com Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present OS Kernel: Linux version 2.4.20-8 ([EMAIL PROTECTED]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:18:24 EST 2003 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Wed Nov 26 16:49:56 2003 (==) Using config file: "/etc/X11/XF86Config" (==) ServerLayout "Default Layout" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Videocard0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "DevInputMice" (**) FontPath set to "Unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.6 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10de,01a4 card , rev b2 class 06,00,00 hdr 80 (II) PCI: 00:00:1: chip 10de,01ac card 10de,0c11 rev b2 class 05,00,00 hdr 80 (II) PCI: 00:00:2: chip 10de,01ad card 10de,0c11 rev b2 class 05,00,00 hdr 80 (II) PCI: 00:00:3: chip 10de,01aa card 10de,0c11 rev b2 class 05,00,00 hdr 80 (II) PCI: 00:01:0: chip 10de,01b2 card 10de,0c11 rev c3 class 06,01,00 hdr 80 (II) PCI: 00:01:1: chip 10de,01b4 card 10de,0c11 rev c1 class 0c,05,00 hdr 80 (II) PCI: 00:02:0: chip 10de,01c2 card 10de,0c11 rev c3 class 0c,03,10 hdr 00 (II) PCI: 00:03:0: chip 10de,01c2 card 10de,0c11 rev c3 class 0c,03,10 hdr 00 (II) PCI: 00:05:0: chip 10de,01b0 card 1043,0c11 rev c2 class 04,01,00 hdr 00 (II) PCI: 00:06:0: chip 10de,01b1 card 1043,8384 rev c2 class 04,01,00 hdr 80 (II) PCI: 00:08:0: chip 10de,01b8 card , rev c2 class 06,04,00 hdr 01 (II) PCI: 00:09:0: chip 10de,01bc card 10de,0c11 rev c3 class 01,01,8a hdr 00 (II) PCI: 00:1e:0: chip 10de,01b7 card , rev b2 class 06,04,00 hdr 01 (II) PCI: 01:06:0: chip 134d,7890 card 134d,0001 rev 02 class 07,03,04 hdr 00 (II) PCI: 02:00:0: chip 10de,01a0 card 10de,0c11 rev b1 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x (VGA_EN is cleared) (II) Bus 1 I/O range: [0] -1 0 0xb000 - 0xbfff (0x1000) IX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 2 non-prefetchable memory range: [0] -1 0 0xec00 - 0xecff (0x100) MX[B] (II) Bus 2 prefetchable memory range: [0] -1 0 0xeff0 - 0xf7ff (0x810) MX[B] (--) PCI:*(2:0:0) nVidia Corporation NV15 [GeForce2 - nForce GPU] rev 177, Mem @ 0xec00/24, 0xf000/27, BIOS @ 0xefff/16 (II) Addressable bus resource ranges are [0] -1 0 0x - 0x (0x0) MX[B] [1] -1 0 0x - 0x (0x1) IX[B] (II) OS-reported resource ranges: [0] -1 0 0xffe0 - 0x (0x20) M
[XFree86] I NEED DRIVERSO FOR SIS 86C201
PLEASE. I need drivers for video car model SIS 86C201 (SIS94-9516-PFD0104) (ST201Rev.1.1A) Thanks. ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Reproducible lock-up while using DRI
Hi, I tested the X11 server and drivers provided here: http://www.xfree86.org/~alanh/drivers/x86/ It generally works quite well with my ATI Radeon 9200 card: 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV280 [Radeon 9200] (rev 01) 01:00.1 Display controller: ATI Technologies Inc: Unknown device 5941 (rev 01) However, I have found a reproducible way to lock-up my computer. I just have to run this OpenGL screensaver from the rsxs package: /usr/lib/xscreensaver/rs-solarwinds and maximize its window (1600x1200 pixels). Here is the X11 server log file where you should find all necessary info about my setup. This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs). XFree86 Version 4.3.99.14 Release Date: 10 October 2003 X Protocol Version 11, Revision 0, Release 6.6 Build Operating System: Linux 2.4.18-bf2.4 i686 [ELF] Current Operating System: Linux jophur 2.6.0-test9-1-386 #1 Sun Oct 26 22:32:52 EST 2003 i686 Build Date: 30 October 2003 Changelog Date: 30 October 2003 Before reporting problems, check http://www.XFree86.Org/ to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Mon Nov 24 08:50:34 2003 (==) Using config file: "/etc/X11/XF86Config-4" (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "B1997PNST/NSTLTN" (**) | |-->Device "ATI Technologies, Inc. Radeon RV280 [Radeon 9200]" (**) |-->Input Device "Generic Keyboard" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "fr" (**) XKB: layout: "fr" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "Configured Mouse" (WW) The directory "/usr/lib/X11/fonts/CID" does not exist. Entry deleted from font path. (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. Entry deleted from font path. (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (WW) Open APM failed (/dev/apm_bios) (No such device) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.2 XFree86 Video Driver: 0.7 XFree86 XInput driver : 0.4 XFree86 Server Extension : 0.2 XFree86 Font Renderer : 0.4 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.4 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.3.0.1, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.6 (++) using VT number 7 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,2560 card 1043,80b2 rev 02 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,2561 card , rev 02 class 06,04,00 hdr 01 (II) PCI: 00:1d:0: chip 8086,24c2 card 1043,8089 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,24c4 card 1043,8089 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,24c7 card 1043,8089 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,24cd card 1043,8089 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,244e card , rev 82 class 06,04,00 hdr 01 (II) PCI: 00:1f:0: chip 8086,24c0 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:1: chip 8086,24cb card 1043,8089 rev 02 class 01,01,8a hdr 00 (II) PCI: 00:1f:3: chip 8086,24c3 card 1043,8089 rev 02 class 0c,05,00 hdr 00 (II) PCI: 00:1f:5: chip 8086,24c5 card 1043,80b0 rev 02 class 04,01,00 hdr 00 (II) PCI: 01:00:0: chip 1002,5961 card 18bc,0132 rev 01 class 03,00,00 hdr 80 (II) PCI: 01:00:1: chip 1002,5941 card 18bc,0133 rev 01 class 03,80,00 hdr 00 (II) PCI: 02:05:0: chip 14e4,4401 card 1043,80a8 rev 01 class 02,00,00 hdr 00 (II) PCI: 02:09:0: chip 1274,5880 card 1274,2000 rev 02 class 04,01,00 hdr 00 (II) PCI: 02:0a:0: chip 1412,1724 card 153b,1147 rev 01 class 04,01,00 hdr 00 (II) PCI: 02:0b:0: chip 109e,036e card 1002,0003 rev 02 class 04,00,00 hdr 80 (II) PCI: 02:0b:1: chip 109e,0878 card 1002,0003 rev 02 class 04,80,00 hdr 80 (II) PCI: 02:0c:0:
Where to put xinitrc? (Re: [XFree86] Can't get a 7-button mouse setup correctly.)
Hello all. After running xmodmap the scrollers work fine. However -- I can't make xmodmap run automatically -- I've tried putting a line to run it in ~/.xinitrc, and I still have to run it manually every time I start an X session -- Is there some other place I should be putting it? ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Tekbul internet Rehberi - iyi bayramlar.!
Tüm islam aleminin Ramazan bayrami kutlu olsun.! Beraber nice bayramlara ... TEKBUL.COM Administrator http://www.tekbul.com --- Tekbul internet Rehberi ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
RE: [XFree86] Dell 1800 FP
I delete this line and it works with the latest version of Xfree : Option "UseFBDev" "true" If someone is interested in my conf, send emailthanx Mark ;-) |-Message d'origine- |De : Mark Vojkovich [mailto:[EMAIL PROTECTED] |Envoyé : mardi 25 novembre 2003 19:47 |À : Alexandre Morales |Cc : [EMAIL PROTECTED] |Objet : RE: [XFree86] Dell 1800 FP | | | I can't diagnose without seeing the /var/log/XFree86.0.log file, |but usually this is because your X-server is too old for your |graphics hardware. | | Mark. | |On Tue, 25 Nov 2003, Alexandre Morales wrote: | |> I'm not using DVI interface with this computer but DSub one. When I start |x, |> it return a "no screen found", oor a "screen found but unusable |> configuration", or something like this. |> |> Alex |> |> |> |-Message d'origine- |> |De : Mark Vojkovich [mailto:[EMAIL PROTECTED] |> |Envoyé : mardi 25 novembre 2003 00:53 |> |À : Alexandre Morales |> |Cc : [EMAIL PROTECTED] |> |Objet : Re: [XFree86] Dell 1800 FP |> | |> | |> | FYI, the "nv" driver that comes with XFree86 didn't support |> |the DVI interface until XFree86 4.3.0, so if you're using something |> |older than 4.3.0, it's not going to work. |> | |> | |> |Mark. |> | |> |On Tue, 25 Nov 2003, Alexandre Morales wrote: |> | |> |> Hello, |> |> |> |> |> |> |> |> I'm newbie in Debian, and I'm trying to configure Xfree. But I don't |> |> understand how to set up my Flat Panel 1800 FP (Dell), with my Nvidia |> |> graphic card. It seems to be so difficult for me. Can you help me |please |> |? |> |> |> |> |> |> |> |> Regards, |> |> |> |> |> |> |> |> Alex |> |> |> |> |> |> |> |> |> ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] bug
hi,I use the VMWare to Install Redhat Linux 7.2. Before installing the VMWare tools for linux, I can't start the X-Windows. I think it maybe duo to the VMWare itself's problem, but after I installed the VMWare tools, the problem occurs again. can you tell me how to deal with this problem? thanks. JIT __ === 体验即拍即打，享受佳能影像之旅 (http://ad4.sina.com.cn/shc/zhuiyu_hprefresh.html) XFree86.0.log Description: application/msdownload
Re: [XFree86] Intel 865G memory allocation problem?
On Tue, Nov 25, 2003 at 02:06:34PM -0700, Scott Beverly wrote: >I have a new system with what appears to be an Intel 82865G integrated >video controller. So far the best I can get is 1024x768x8bit. I been >searching the list archives and the XFree86.org website, but haven't found >anything that directly refers to the problem I am having. Below is the >log file I got after getting the latest CVS tree (yesterday 4.3.99.16). > >Does anyone have any suggestions on how I can get higher resolution and >color depth? If one of your BIOS setup screens has an option to increase the amount of memory reserved for video at boot time, that should take care of the problem. David -- David Dawes developer/release engineer The XFree86 Project www.XFree86.org/~dawes ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] cannot upgrade XFree82 from 4.2.0 to 4.2.1
it's possible that the XFree86 version and the module version are incompatible, hence the unresolved symbols. I'd recommend 4.3.0 for your graphics card. use a recent 2.4 kernel (e.g >=2.4.21) with the i810, i830 and agpgart kernel modules. if you use 4.3.0, ditch the intel drivers. cheers chris -- - | | | TELESCOPE, n.| | A device having a relation to the eye similar to that of the | | telephone to the ear, enabling distant objects to plague us with a | | multitude of needless details. Luckily it is unprovided with a bell | | summoning us to the sacrifice. | | -- Ambrose Bierce, "The Devil's Dictionary" | | | - ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] Can't get a 7-button mouse setup correctly.
Hi Owen, On Tuesday 25 November 2003 21:59, OS wrote: >Do you have any > experience with the Logitech mice ? No, I don't. > Should I be using a different > protocol ? IMPS/2 and ExplorerPS/2 don't work at all. Try another protocol. Protocol has to be correct before anything else. I tried to use another protocol with M$ IntelliMouse. Movement, 3 buttons and wheel worked but not other buttons. I had to choose ExplorerPS/2 to make them working. What protocol to use for Logitech would be good question for developers, I guess. > Is there > anything I can do to see what is coming from the mouse given that xev > shows absolutely nothing for buttons 4, 5, 6 & 7. I have experience that if you do not see mouse button presses in xev you can forget it will work. I don't know of any other tool that goes more to the hardware. > I am coming to the conclusion that Logitech mice will never be fully > supported by X This is question or remark for developers - I really don't know. > :-( which is a shame as M$ mice are a lot more pricey Just my opinion: On the contrary of Microsoft software, the Microsoft HARDWARE is worth the money you spend for it. Best Regards, Jozef [EMAIL PROTECTED] ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
Re: [XFree86] XvQueryAdaptors: small memory leak
Phil Dumont wrote: Xv SYNOPSIS: There's a small memory leak in XvQueryAdaptors(). DESCRIPTION: Not all of the memory allocated by XvQueryAdaptors is freed by XvFreeAdaptorInfo. It looks as though the culprit is the first Xalloc() in XvQueryAdaptors(). The space is used as a local buffer (pointer assigned to variable named "buffer") -- that is, the returned XvAdaptorInfo structure does not have a reference to this memory, so it is not XvFreeAdaptorInfo's responsibility to free it. It must be freed before returning from XvQueryAdaptors(). There are several failure paths where buffer is freed. But on success, it is not freed. SAMPLE FIX: Insert "Xfree(buffer);" immediately before the last return statement of the XvQueryAdaptor(). I've tried this fix, and it seems ok. The above sample program does not work, and at least one Real Program (one that acutally uses the returned data) seems to continue to work correctly. This has been fixed 6 months ago in CVS. p.s., from a cursory glance at XvQueryExtensions(), I'd say it has the same problem, though I haven't tested it or tried to fix it. There is no procedure named "XvQueryExtensions". And XvQueryExtension() (without s) looks perfectly ok to me. What you probably mean is XvQueryEncodings(). If so, you're correct. It needs a similar fix as XvQueryAdaptor. Thomas -- Thomas Winischhofer Vienna/Austria thomas AT winischhofer DOT net http://www.winischhofer.net/ twini AT xfree86 DOT org ___ XFree86 mailing list [EMAIL PROTECTED] http://XFree86.Org/mailman/listinfo/xfree86
[XFree86] Bad TV out resolution - nvidia driver
Please excuse my bad english I only can see tv with a resolution of monitor 800x600 if i change my monitor resolution to 1280x1024, I see in the the tv a fragment ( 800x600 ) of a 1280x1024 total size. How i can have 1280x1024 in the monitor and 800x600 in the tv ??? Is there an example of a xf86config file that i can use ??? Here is my xf86config Section "Files" # Multiple FontPath entries are allowed (they are concatenated together) # By default, Mandrake 6.0 and later now use a font server independent of # the X server to render fonts. FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/local" FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/X11R6/lib/X11/fonts/URW" FontPath "/usr/X11R6/lib/X11/fonts/Speedo" FontPath "/usr/X11R6/lib/X11/fonts/PEX" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1" FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/kwintv" FontPath "/usr/X11R6/lib/X11/fonts/truetype" FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/CID" FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1" FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/xtest" EndSection Section "ServerFlags" #DontZap # disable (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work #DontZoom # disable / (resolution switching) EndSection Section "Module" Load "dbe" # Double-Buffering Extension Load "v4l" # Video for Linux Load "extmod" Load "type1" Load "freetype" Load "glx" # 3D layer #Load "speedo" EndSection Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" Option "XkbModel" "pc105" Option "XkbLayout" "es" Option "XkbCompat" "" Option "XkbOptions" "" EndSection Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "ButtonNumber" "5" Option "Name" "Autodetection" Option "Device" "/dev/mouse" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" HorizSync 28-69 VertRefresh 50-120 # Sony Vaio C1(X,XS,VE,VN)? # 1024x480 @ 85.6 Hz, 48 kHz hsync ModeLine "1024x480"65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066 EndSection Section "Device" Identifier "device1" VendorName "Nvidia" BoardName "GeForce2 MX/MX 400" Driver "nvidia" Option "TwinView" "1" Option "TwinViewOrientation" "Clone" Option "ConnectedMonitor" "CRT, TV" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1280x1024, [EMAIL PROTECTED];" Option "TVStandard" "PAL-B" Option "NvAGP" "3" Option "DigitalVibrance" "0" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" InputDevice "Keyboard1" "CoreKeyboard" InputDevice "Mouse1" "CorePointer" Screen "screen1" EndSectio
