Hello,
I confirm now my QCA9377 pci module has no regressions in either modes
with these patches
I was able to test it as an AP and it worked under ETHERNET mode
without any obvious regressions but I'm unable to check maximum
throughput
My hardware info from dmesg and tested on kernel 5.17.7
qca93
On Mon, May 16, 2022 at 6:25 AM Sergey Ryazanov wrote:
> We use ieee80211_tx_status() to report each completed tx frame.
> Internally, this function calls sta_info_get_by_addrs(), what has a
> couple of drawbacks:
> 1. additional station lookup causes a performance degradation;
> 2. mac80211 can n
Maxime Bizon writes:
> On Mon, 2022-05-16 at 19:11 +0300, Kalle Valo wrote:
>
>> On what ath10k hardware and afirmware version did you test this? I
>> can add that to the commit log.
>>
>
> QCA9984
> 10.4-3.10-00047
Thanks, I added that in the pending branch.
--
https://patchwork.kernel.org/
On Mon, 2022-05-16 at 19:11 +0300, Kalle Valo wrote:
Hello Kalle,
> On what ath10k hardware and afirmware version did you test this? I
> can add that to the commit log.
>
QCA9984
10.4-3.10-00047
--
Maxime
___
ath10k mailing list
ath10k@lists.
Maxime Bizon writes:
> Because of this missing switch case, 160Mhz transmit was reported as
> 20Mhz, leading to wrong airtime calculation and AQL limiting max
> throughput.
>
> Signed-off-by: Maxime Bizon
On what ath10k hardware and afirmware version did you test this? I can
add that to the com
Because of this missing switch case, 160Mhz transmit was reported as
20Mhz, leading to wrong airtime calculation and AQL limiting max
throughput.
Signed-off-by: Maxime Bizon
---
drivers/net/wireless/ath/ath10k/htt_rx.c | 4
1 file changed, 4 insertions(+)
diff --git a/drivers/net/wireless/
