To resolve the issue, I have added the proper pinctrl signals for the uart,
I did this for uart0 & uart1
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
0x170 0x30 /* (E15) uart0_rxd.uart0_rxd, PIN_INPUT |
MUX_MODE0 */
0x174 0x00 /* (E16) uart0
Hi again,
I decided to look through the /proc/iomem pseudo-file to see if the mapping
looked reasonable. I believe the kernel may be corrupted since there is
garbage in the map for the usb:
ubuntu@arm-hf:~$ cat /proc/iomem
44e07000-44e07fff : /ocp/gpio@44e07000
44e07000-44e07fff : 44e07000.gp
Robert,
Yes, it is correctly passed to the kernel:
ubuntu@ubuntu-armhf:~$ cat /proc/cmdline
console=ttyO0,115200n8 fixrtc
capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN root=/dev/mmcblk0p2
ro rootfstype=ext4 rootwait
Best regards,
Phil
On Tuesday, April 8, 2014 4:00:47 PM UTC-5, Rober
>
> ubuntu@ubuntu-armhf:~$ cat /boot/uboot/uEnv.txt
> optargs=fixrtc capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN
> loadfdt=ext4load mmc ${mmcdev}:2 ${fdtaddr} /boot/dtbs/${fdtfile}
> loaduimage=mw.l 4804c134 fe1f; if ext4load mmc 0:2 ${loadaddr}
> /boot/zImage; then mw.l 4804c194 0120
On Tuesday, April 8, 2014 2:39:03 PM UTC-5, polloc...@gmail.com wrote:
>
> Hi,
> On my BBB I have a Serial RS-232 BeagleBone Cape (BB_BONE_SERL-03 Rev A1)
> that I have jumpered for UART4. It works under Angstrom and was recently
> working under Ubuntu 12.04 LTS. Now it is not working under Ubu