To: CentOS mailing list
Thema: Re: [CentOS] Nvidia maximum pixel clock issue in
kmod-nvidia-384.98
Dear All,
Start BIOS Configuration and go to Graphic Configuration change On Board
VGA to PCI Express x16
Automatic is VGA on Board
Bis bald
Alexander
Am 09.01.2018
OS: CentOS 6.5.
After I set multicast_router of bridge and it's port to 2, like following:
echo 2 > /sys/devices/virtual/net/eth81/bridge/multicast_router
echo 2 > /sys/devices/virtual/net/bond2/brport/multicast_router
Then soft lockup occured:
Message from syslogd@node-0 at Jan 9
Weird, Just did a new PV deploy of CentOS 7 and upgraded the kernel and
it worked fine this time.
--
Shaun Reitan
NDCHost.com
-- Original Message --
From: "Johnny Hughes"
To: centos-virt@centos.org
Sent: 2018-01-09 07:33:26 AM
Subject: Re: [CentOS-virt] Centos 7
I thought I'd chime in and say that I'm seeing the same kernel-plus boot
failure that Shaun Reitan reported earlier. Is there likely to be another
build 3.10 kernel build coming down the pipeline that might fix this
issue? Here's the output of my failed PV domU boot:
[0.00]
Thanks for the information on festival.I think that this will work for at
leastsome of our applications.
On Tuesday, January 9, 2018 12:43 PM, Frank Cox wrote:
On Tue, 9 Jan 2018 17:34:32 + (UTC)
Chris Olson wrote:
> One of our test directors suggested that
On Tue, 9 Jan 2018 17:34:32 + (UTC)
Chris Olson wrote:
> One of our test directors suggested that we use a digital count-
> down timer with audio outputs to prompt test operators for their
> inputs or responses at appropriate times. We have not found such
> a utility on our CentOS 6
hi, free IPA everyone?
I wanted to ask if you maybe seen below errors. I'm trying
regular:
$ ipa-client-install --principal=admin
--password="ccnR.Biotec13#diradm" --enable-dns-updates
and it fails:
...
Valid From: 2018-01-09 16:51:35
Valid Until: 2038-01-09 16:51:35
Enrolled in
On 09/01/18 19:09, Johnny Hughes wrote:
>
> We could use some community help in:
>
> 1. Making the 3.10.0-693.11.6.el7.centos.plus.i386 build.
>
> 2. Testing the 4.9.75.el7.centos.i686 kernel from the experimental repo
> on the i386 arch.
>
> Please post info on this thread in the mailing
On Tue, Jan 9, 2018 at 10:09 AM, Johnny Hughes wrote:
> Red Hat no longer maintains the i386 kernel for RHEL 7.4. We have been
> using a modified kernel until this latest meltdown / spectre release
> (*kernel-3.10.0-693.11.6.el7*).
>
> This latest release does not build on
Red Hat no longer maintains the i386 kernel for RHEL 7.4. We have been
using a modified kernel until this latest meltdown / spectre release
(*kernel-3.10.0-693.11.6.el7*).
This latest release does not build on i386/i686 and we can't figure out
how to make it work.
Build try:
We have several CentOS 6.x systems that are incorporated into
suites of special test equipment. One of the requirements for
these systems is that they be kept up to date and they are kept
up to date using yum once per week or more frequently, as needed.
All of our CentOS 6.x systems have at least
-Original Message-
From: CentOS [mailto:centos-boun...@centos.org] On Behalf Of
johan.vermeul...@telenet.be
Sent: Dienstag, 9. Januar 2018 16:34
To: CentOS mailing list
Subject: [CentOS] update to Centos7.4: Failed to open \EFI\BOOT\grubx64.efi -
Not Found
Hello All,
updating from
Hello All,
updating from Centos7.3 to Centos7.4 rendered one of our laptops unbootable.
EM:
Failed to open \EFI\BOOT\grubx64.efi - Not Found
Failed to load image \EFI\BOOT\grubx64.efi: Not Found
start_image() returned Not Found
How could this occur because of an update and how to fix this?
On 01/08/2018 02:10 PM, Shaun Reitan wrote:
> While installing the experemental kernel on a CentOS 7 PV the following
> happened. After a reboot of the PV the kernel looks to be installed but
> there is no option for booting it in grub. I attempted to run yum
> reinstall
Send CentOS-announce mailing list submissions to
centos-annou...@centos.org
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.centos.org/mailman/listinfo/centos-announce
or, via email, send a message with subject or body 'help' to
Hi Guys,
I am using my native library to run but during runtime, its picking the
default library i.e. /usr/lib/libssl. Due to this, my application crashes.
But after adding the Soft link for my native library, its working fine.
Can anybody Please let me know why its not working without adding
Robert Arkiletian writes:
> Noticed C6 had a kernel update on Friday.
> 2.6.32-696.18.7.el6.x86_64
> What is the flag in /proc/cpuinfo that indicates the KPTI patch for
> Meltdown CVE-2017-5754 for C6?
>
> Some distros are using "kaiser" some like Fedora are using "pti". Also
> noticed some (like
17 matches
Mail list logo