For crying out loud, Richard, You've got to take some calipers to the boat
and measure the od of the threads, and take a rule and measure the threads
per inch, and the number per millimeter - C&C had both metric and inch on
these boats. Failing that, take some pictures and take the nut to a
machin
Richard:
When you spoke with Rob, did you ask if he knows the diameter/thread size of
the top of the rudder post for that boat? He used to have a lot of specs on
boats (including build files, which are no longer available).
In any event, from prior e-mail it sounded like some of the thre
I have a spare sitting around from working on my boat, let me know when you
figure out the size.
Joe Della Barba
Coquina C&C 35 MK I
Kent Island MD USA
From: Richard Bush via CnC-List
Sent: Monday, December 11, 2023 12:38 PM
To: Stus-List
Cc: virb...@cogeco.ca; Richard Bush
Sub
Maybe take the damaged part to a stainless fabricator and get his advice.
C
> On 12/11/2023 3:53 PM EST Richard Bush via CnC-List
> wrote:
>
>
> To follow Up; I called Rob at South Shore; he was very patient and listened
> to my tale of woe; he said that there was no "off the shelf" part
To follow Up; I called Rob at South Shore; he was very patient and listened to
my tale of woe; he said that there was no "off the shelf" part for this collar
and that my best bet would be to have a local machine shop fabricate one; I
have looked at the list on McMaster-Carr (sent by Chris Reidin
Chris, that's great, thank you;' now if I can figure out which one
Richard
Richard N. Bush Law Offices2950 Breckenridge Lane, Suite NineLouisville,
Kentucky 40220(502) 584-7255
On Saturday, December 9, 2023 at 03:06:29 PM EST, Chris Riedinger via
CnC-List wrote:
https://www.mcma