On Saturday 19 April 2008 12:19:55 am Leskep wrote:
> Hi Alan
> This is using the digi port on the 857 with all dsp functions off
> but I need 2400 hz of audio passband just to fit the non standard
> RFSM8000 signal in and just cant get it from stock standard 857
> Maybe just put it back in my mobi
- Original Message -
From: Leskep
To: digitalradio@yahoogroups.com
Sent: Saturday, April 19, 2008 12:11 AM
Subject: Re: [digitalradio] RFSM8000 and Yaesu FT857
Hi Skip
The problem is that I need to pass around 2.4 khz of signal audio
and with the stock filter it will not do it
the FT920 works well on RFSM
Regards
Les
From: Alan Barrow
Sent: Saturday, April 19, 2008 1:55 PM
To: digitalradio@yahoogroups.com
Subject: Re: [digitalradio] RFSM8000 and Yaesu FT857
Hello,
You should be using the digi port, and there is a specific setting that
allows you to center the
] RFSM8000 and Yaesu FT857
Les,
Are you sure it is the IF passband? If your BFO injection frequency is set
correctly, you should be able to pass 300 to maybe 2200 Hz. Otherwise, SSB
phone will have no lows.
If you have audio transformers in a homebrew interface, make sure they have the
Hello,
You should be using the digi port, and there is a specific setting that
allows you to center the filter passband around typical digi signals. I
find 200 hz up works best for ALE.
Since the signal is now centered, I can then even use the DSP bandpass
to really tighten up.
If you have no
Les,
Are you sure it is the IF passband? If your BFO injection frequency is set
correctly, you should be able to pass 300 to maybe 2200 Hz. Otherwise, SSB
phone will have no lows.
If you have audio transformers in a homebrew interface, make sure they have the
necessary frequency response. The