I am just running a cw interface on com 5 and have to select a radio for it to
work. it works fine until I get the radio timeout .. message, I have no
radio connected, how can I stop this?
Thanks
DickĀ NY1E
__
DX4WIN mailing list
I was using version 5, I downloaded version 8 and it has a different
setup, the radio and cw are separate selections and seems to work with
the demo. Just waiting for my license key now!
Dick NY1E
__
DX4WIN mailing list
Home:
,
John, N3AM
At 03:13 10/12/2012, Dave Perry, N4QS wrote:
Date: Thu, 11 Oct 2012 22:13:06 -0500
From: Dave Perry, N4QS n...@comcast.net
Subject: Re: [Dx4win] Radio Timeout
Sender: dx4win-boun...@mailman.qth.net
To: 'Thomas Lutz' tel...@earthlink.net, dx4win@mailman.qth.net
Reply-to: n...@comcast.net
Of John Silva N3AM
Sent: Friday, October 12, 2012 6:04 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Radio Timeout
I run a K3 with Win7, and only get a radio timeout after pressing the REV
button for about 15 seconds. I do not get a radio timeout if I use the
A/B button to hear the split
I just confirmed what John, N3AM, said about timeout when depressing REV for
about 15 seconds. Had to restart radio to get interface working again. I am
using XP.
Arne N7KA
__
DX4WIN mailing list
Home:
I am running a K3 with DX4WIN, 8.05. Computer is running Windows 7.
When I am working split, going from the listening frequency to the transmit
frequency to hear the pile up, causes the radio to time out. I use the XFC
button to do this. Any ideas?
Tom, W0ZR
On Thu, Oct 11, 2012 at 3:48 PM, Thomas Lutz W0ZR wrote:
I am running a K3 with DX4WIN, 8.05. Computer is running Windows 7.
When I am working split, going from the listening frequency to the
transmit
frequency to hear the pile up, causes the radio to time out. I use the
XFC button to do
...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Thomas Lutz
Sent: Thursday, October 11, 2012 4:49 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Radio Timeout
I am running a K3 with DX4WIN, 8.05. Computer is running Windows 7.
When I am working split, going from the listening
Hi Dave,
From time to time when radio behaves oddly I just reset it. Most of the
time it does fix the problem. Too bad that I haven't yet figured out how to
save the radio sets and have to configure all settings all over again.
73 DX de PY2YP - Cesar
On 20/04/2011 13:18, David M. Monfried
20 april 2011 18:18
Aan: Dx4win@mailman.qth.net
Onderwerp: [Dx4win] Radio Timeout
For the past couple of months (maybe since upgrading to v8.05?), I'm
receiving frequent radio timeout messages. These can be as frequent as
every
few minutes. I've tried lowering the baud rate in
File
10 matches
Mail list logo