__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
Nope, the Tim Conway reflector.
Jack Spitznagel, DDS, PhD
and KD4IZ... ;@)
see: https://youtu.be/bfTyEtVIe84
Sent from my iPhone
> On Nov 20, 2018, at 22:42, Brian Denley wrote:
>
> Is this the Tim Allen reflector? :o)
>
> Brian Denley
> KB1VBF
> Sent from my iPad
>
>> On Nov 20, 2018, at 7:4
Is this the Tim Allen reflector? :o)
Brian Denley
KB1VBF
Sent from my iPad
> On Nov 20, 2018, at 7:45 PM, Fred VE3FAL wrote:
>
> In my years in the radio and electronics hobby I have learnt that the magic
> smoke wants out as well
>
> Fred
> VE3FAL
>
> Sent from my iPhone
> Fred VE3FAL/CIW64
P.S. to the original poster...
You might also consider a gofundme. It never hurts to ask.
73
Len
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bill W4ZV
Sent: Sunday, November 18, 2018 5:10 AM
To: elecraft@mailman.qth.
In my years in the radio and electronics hobby I have learnt that the magic
smoke wants out as well
Fred
VE3FAL
Sent from my iPhone
Fred VE3FAL/CIW649
> On Nov 20, 2018, at 19:40, John Simmons wrote:
>
> Ha! I would venture to say that anyone that says they haven't done this kind
> of thing
Ha! I would venture to say that anyone that says they haven't done this
kind of thing would be fibbing. I've blown up lots of stuff:
* When I was in high school electronics class, I wired an AC power
switch in some long-forgotten transmitter in PARALLEL with the power
line instead of SERI
K3 + KAT500 via Aux Bus
1 - Train the KAT500
2 - Switch to Manual Mode
3 - Turn on K3 frequency tracking. CONFIG:KAT3 tap "1" to KAT500Y.
GL - Steve WB6RSE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
H
"It does not make any difference whether he is using RF sensing or not."
Don,
Since I have trained my KAT500, I had assumed the OP had done that as well. I
was thinking that the problem was that the SSB phone transmission was not
causing the KAT500 to switch to the memorized tuning solution.
For Sale:
Elecraft K3-100 S/N 4385. Mint Condition. Full power out, no issues. Original
owner, kit built, no smoking or pets. Never used for FD or portable. Upgraded
synthesizer and KRX3A 2nd receiver installed by Don W3FPR. Upgraded to latest
specs at Elecraft in January, 2018. Has latest firmw
*/Andy
Take this advice train the Tuner then run it in MAN mode I use my KPA500
and KAT500 with both a K3 and a IC7610 all I have to do when using the
Icom is tap the key in any mode send RF and the Tuner changes to the
memory it has in store for that segment of the band and antenna.
This is
Thanks Michael, Andy, and all for the original thread. It made me focus on
proper use of my KPA500 which has really done a great job for me since I
acquired it and a KAT500 over the summer.
Retitled this message because I do not want to hijack/derail the original
conversation.
What I want to k
Andy,
It does not make any difference whether he is using RF sensing or not.
Train the Tuner in AUTO, and then switch to MAN mode.
73,
Don W3FPR
On 11/19/2018 11:30 PM, ANDY DURBIN wrote:
"The OP does not say he is using a K3"
I was mistaken. The OP does say he is using a K3S. However, the p
Martin,
Please check the "PITCH" setting vs. the mark tone generated by
your AFSK software. The K3/K3S contains a very narrow audio
filter on the input audio (CONFIG:AFSK TX). If the AFSK TX
filter is ON and your software does not match the K3 PITCH you
will see the behavior you describe.
73,
I used the AX1 with my K1 on November 15th chasing a SOTA activator in IL, I’m
in FL.
The AX1 was setup inside a screened in porch on a table top tripod, the K1 was
set to 7 watts and tuned up on 20m at 1.1 swr.
We made the contact, he gave me 339 RST, I was very surprised and impressed !
The ATU
Sorry. But DATA A is for USB modes like FT8, PSK, etc. RTTY (FSK) is a LSB mode
and should use the Sub-Band AFSK A on a K3.
Sent from my iPhone
...nr4c. bill
> On Nov 19, 2018, at 10:45 PM, Martin Sole wrote:
>
> Okay, but the K3 book states AFSK A mode can also be used for Audio-shift
> t
Thanks very much for all of the helpful and knowledgeable advice! I will do
more reading in my Elecraft manuals and Cady books and adjust accordingly.
This is a wonderful reflector!
The one additional complicating factor for me is that there are so many
interfering objects close to my SteppIR
16 matches
Mail list logo