Stephen Shearer writes:
> I have read, tried, and still can't use a "modern" thumb drive
> (USB)... with my PX3 for data transfer.
>
> I have an OLD thumb drive that works in my PX3 firmware 1.48...
> I have a Targus.com M-Sys DiskOnKey 128M formatted as FAT32 that
> works. (yes, 128 mega...)
> I
PX3 doesn't "seem" to have a size issue... aka my 128M vs 16G thumb drive.
As I said I would, I tried an SD card (Class 10 and 16G) with a USB
interface.
The SD card worked ("M" showed on the screen of the PX3) for both the
USB2.0 and the USB3.0 interface device.
SO, something is different betw
One thing you might try is use Windows disk management in the
administrative tools section of control to partition the large thumb
drive with a first fat32 partition that is 2 or 4 GB - if your whole
drive is fat32 you should just be able to shrink it down to a size that
may work. If it isn't
that are not class 10. You can
format to FAT32 in your desktop or laptop.
73,
Bill
K9YEQ
-Original Message-
From: elecraft-boun...@mailman.qth.net On
Behalf Of Vic Rosenthal
Sent: Saturday, February 24, 2018 10:38 AM
To: Stephen Shearer
Cc: ELECRAFT reflector
Subject: Re: [Elecra
th.net On
Behalf Of Vic Rosenthal
Sent: Saturday, February 24, 2018 10:38 AM
To: Stephen Shearer
Cc: ELECRAFT reflector
Subject: Re: [Elecraft] PX3 & thumb drive...
I have the same problem with my P3.
Vic 4X6GP
> On 24 Feb 2018, at 17:23, Stephen Shearer wrote:
>
> I have read,
It isn't a problem of file name.. The PX3 won't see the new thumb
drives. It reads the OLD drive just fine. I don't have a problem with
the name as I edit with the contest name in the filename and then
copy/edit to the one the PX3 reads. works great, except 16G drives - no
go. 73 steve
There was a bug in the last firmware update that has not been fixed. The
file name that the PX3 saves the data to is different than the file name
that it tries to read the data back in from. Until the firmware is
corrected, you need to manually edit the saved file name to have it match
the expect
I have the same problem with my P3.
Vic 4X6GP
> On 24 Feb 2018, at 17:23, Stephen Shearer wrote:
>
> I have read, tried, and still can't use a "modern" thumb drive (USB)... with
> my PX3 for data transfer.
>
> I have an OLD thumb drive that works in my PX3 firmware 1.48...
> I have a Targus.
I have read, tried, and still can't use a "modern" thumb drive (USB)...
with my PX3 for data transfer.
I have an OLD thumb drive that works in my PX3 firmware 1.48...
I have a Targus.com M-Sys DiskOnKey 128M formatted as FAT32 that works.
(yes, 128 mega...)
I have a San Disk Ultra Fit FAT32 16G
9 matches
Mail list logo