There is remora code for the nucleo and the cnc shield. Not sure about
the linked board. I think you can talk to the nucleo over ethernet
using an external board.
I haven't tried it. You can ask Cakeslob on the forum.
Eric Keller
Boalsburg, Pennsylvania
On Wed, Nov 1, 2023 at 4:24 PM
> Cc: fxkl4...@protonmail.com
> Subject: Re: [Emc-users] X-NUCLEO-IHM03A1 stepper controller
>
> On Wed, 1 Nov 2023, gene heskett wrote:
>
> > On 11/1/23 16:20, fxkl47BF--- via Emc-users wrote:
> >> anyone here have any experience with this controller
> >>
>
On Wed, 1 Nov 2023, gene heskett wrote:
> On 11/1/23 16:20, fxkl47BF--- via Emc-users wrote:
>> anyone here have any experience with this controller
>>
>> https://www.st.com/en/ecosystems/x-nucleo-ihm03a1.html
>>
>> .
> First: That boards purported intelligence will sure as tunket get
> between
On 11/1/23 16:20, fxkl47BF--- via Emc-users wrote:
anyone here have any experience with this controller
https://www.st.com/en/ecosystems/x-nucleo-ihm03a1.html
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
anyone here have any experience with this controller
https://www.st.com/en/ecosystems/x-nucleo-ihm03a1.html
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
