I used to be able to view Nasa-tv
(http://www.nasa.gov/multimedia/nasatv/) in Firefox with
mplayerplug-in. This no longer works however. The plug-in starts to
connect then says "Stopped" for any method (windows, realplayer, or
quicktime) chosen.
I feel that it is a changed use flag but I have th
Stefan G. Weichinger wrote:
> looks fine but doesn't start at next boot. Or more exactly: It seems to
> get started, but doesn't run then.
Does this only happen at boot, or does it also happen if you manually
call /etc/init.d/sshd start?
--
Randy Barlow
http://electronsweatshop.com
--
[EMAIL PR
Greets, gentoo-users,
as soem of you might remember I only recently migrated my system to
amd64 (fresh install).
I don't exactly know if there is a relation to this move but since then
I have the problem that some services simply don't start when the system
boots.
For example xinetd, sshd and s
Ian Lee wrote:
> according to the nvidia site version 71.86.01 is the lastest TNT2
> drivers have tried these they are in the portage tree
Thanks for the heads up! I had from a while ago blocked versions newer
than 1.0.7185 because it used to be that they wouldn't work with my
card. Apparently t
Mick ha scritto:
>> The point is: be careful when using dhcp from a LiveCD. Your system
>> might act differently the next time you boot the hard drive.
>
> The dhcpcd was changed recently and not all dhcp servers take kindly to it,
> when it uses DUID the way it does (some servers depend on DUID
> > I just spent a few hours trying to fix a problem where my Gentoo
> > router would only dhcp the ip address of the cable modem instead of
> > the proper IP address from the WAN. I ended up enabling USE=vram and
> > it worked again.
> >
> > # equery uses dhcpcd
> > + + vram : Disable DUID due t
kashani badapple.net> writes:
> > I'll figure out why the php pages are not working across
> > a symlink.
> In you vhost config file you probably have something like this
>
> Options -Indexes FollowSymLinks MultiViews
> AllowOverride All
> Order allow,deny
>
On Thursday 06 December 2007, Grant wrote:
> I just spent a few hours trying to fix a problem where my Gentoo
> router would only dhcp the ip address of the cable modem instead of
> the proper IP address from the WAN. I ended up enabling USE=vram and
> it worked again.
>
> # equery uses dhcpcd
>
Randy Barlow wrote:
> I updated from 2.6.22-gentoo-r9 to 2.6.23-gentoo-r3, and now
> nvidia-drivers-1.0-7185 won't build. I use the older drivers because I
> have a Riva TNT2. When I change the /usr/src/linux link to the old
> kernel source, the package builds just fine, so I'm thinking that
> so
I just spent a few hours trying to fix a problem where my Gentoo
router would only dhcp the ip address of the cable modem instead of
the proper IP address from the WAN. I ended up enabling USE=vram and
it worked again.
# equery uses dhcpcd
+ + vram : Disable DUID due to volatile media, such as a
Mick wrote:
> Read your error again. It tells you to run make oldconfig to fix it.
> However, if you check my earlier message posted today about "Make errors with
> new kernel..." you'll see that I have not been able to emerge any drivers
> with the new kernel. I suspect a bug.
If you pay at
On Thursday 06 December 2007, Randy Barlow wrote:
> I updated from 2.6.22-gentoo-r9 to 2.6.23-gentoo-r3, and now
> nvidia-drivers-1.0-7185 won't build. I use the older drivers because I
> have a Riva TNT2. When I change the /usr/src/linux link to the old
> kernel source, the package builds just f
yes
-Ursprüngliche Nachricht-
Von: Albert Hopkins [mailto:[EMAIL PROTECTED]
Gesendet: Do 06.12.2007 22:37
An: gentoo-user@lists.gentoo.org
Betreff: Re: [gentoo-user] exaile
On Thu, 2007-12-06 at 22:16 +0100, Zimmerling, Alexander wrote:
> Hi Guys,
>
> I need your help.
>
> After a mas
I updated from 2.6.22-gentoo-r9 to 2.6.23-gentoo-r3, and now
nvidia-drivers-1.0-7185 won't build. I use the older drivers because I
have a Riva TNT2. When I change the /usr/src/linux link to the old
kernel source, the package builds just fine, so I'm thinking that
something is broken with my new
On Thursday 06 December 2007, Kale Booth wrote:
> Rebuilding my modules last night after updating my kernel I ran into
> these same errors for svgalib. I didn't have a chance to look into it
> last night but I will this evening.
Thanks. Good to know I'm not alone. I'll also check the forums when
On Thu, 2007-12-06 at 22:16 +0100, Zimmerling, Alexander wrote:
> Hi Guys,
>
> I need your help.
>
> After a mass update a few days ago, exaile fails to start.
>
> I always get this errormsg when exaile is started from shell
>
> [...]
> line 144, in
> from _gst import *
> ImportError: /
On Sun, Dec 02, 2007 at 11:58:46PM +0100, Jil Larner wrote:
> > I had to do the same thing with the mysql upgrade from 3.x to 4.x. My
> > apache upgrade, I just had to redo the configs by hand. php4 to php5
> > might be a bit more tricky. Currently that's the reason I have php5
> > masked...
>
>
Hi Guys,
I need your help.
After a mass update a few days ago, exaile fails to start.
I always get this errormsg when exaile is started from shell
>>
[EMAIL PROTECTED] ~ $ exaile
Traceback (most recent call last):
File "/usr/lib/exaile/exaile.py", line 91, in
from xl.gui import main as e
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tom Brown wrote:
Source compiled.
> --- ACCESS VIOLATION SUMMARY
> ---
> LOG FILE =
> "/var/log/sandbox/sandbox-gnome-base_-_gnome-desktop-2.20.1-27301.log"
>
> unlink:/usr/share/xml2po/docbook.
> > > # ls -l
> >
> > notice in /usr/src/linux, you have much fewer files (not dirs), than
> > you do on your laptop. Something deleted them.
> >
> > The vmlinux, Module.symvers, and System.map are all generated files.
> > So it looks like something deleted those files while your kernel was
> > bei
When the bookmarks list is longer than what fits vertically on the
screen, then hitting Alt+B while Firefox is in fullscreen mode
won't show the list of bookmarks. The bookmark list is there --
because it is possible to select for example the last entry with
and -- but it is invisible. (Wh
Hi all. I want to syck my pocet PC ( E-ten m600+ Windows Mobile 5.0 ) with
gentoo, but I have probles.
I instal SynceSe from SVN. My dmesg
usb 2-4: new full speed USB device using ohci_hcd and address 3
usb 2-4: configuration #1 chosen from 1 choice
rndis0: register 'rndis_host' at usb-:00:02
Rebuilding my modules last night after updating my kernel I ran into
these same errors for svgalib. I didn't have a chance to look into it
last night but I will this evening.
--Kale
On 12/6/07, Mick <[EMAIL PROTECTED]> wrote:
> Hi All,
>
> I've installed the new kernel and I can't compile the var
James wrote:
I how have a simple php page working
I'll figure out why the php pages are not working across
a symlink.
In you vhost config file you probably have something like this
Options -Indexes FollowSymLinks MultiViews
AllowOverride All
Order allow,deny
On 12/6/07, Thufir <[EMAIL PROTECTED]> wrote:
> I haven't put much time into this, unfortunately, but am getting blocked
> packages when emerging gnome. Just kinda throwing this out there, I'll
> hopefully be able to do some research later today and add to this post:
> arrakis ~ # emerge -DuNv
Jason Carson canuckster.org> writes:
>
> Here is my apache2 -M and PHP doesn't show up but it still works fine. Do
> you have "-D PHP5" in /etc/conf.d/apache2? ...
APACHE2_OPTS="-D DEFAULT_VHOST -D INFO -D LANGUAGE -D MANUAL -D SSL -D
SSL_DEFAULT_VHOST -D SUEXEC -D PHP5"
(yes)
> Loaded Modul
Hi All,
I've installed the new kernel and I can't compile the various driver modules
for it. So far both net-wireless/rt2570-20070209 and
media-libs/svgalib-1.9.25 failed. This is the error message of the latter:
CC
[M]
/var/tmp/portage/media-l
> > # ls -l
>
> notice in /usr/src/linux, you have much fewer files (not dirs), than
> you do on your laptop. Something deleted them.
>
> The vmlinux, Module.symvers, and System.map are all generated files.
> So it looks like something deleted those files while your kernel was
> being compiled?
>
>
Quoting Grant <[EMAIL PROTECTED]>:
# ls -l
notice in /usr/src/linux, you have much fewer files (not dirs), than
you do on your laptop. Something deleted them.
The vmlinux, Module.symvers, and System.map are all generated files.
So it looks like something deleted those files while your k
Hi,
I think I've got my gentoo installation all effed up. I went a few weeks
without doing a --sync followed by a emerge -uD world. On top of that I,
I installed my own version of Python 2.5.1 from the source tarball off
of python.org. Now, after a --sync, when I do an emerge -uD world I will
see
That last email was all wrong. It was output from my laptop. Here is
the stuff from my router.
> > make: *** No rule to make target `menuconfig'. Stop.
>
> what does "ls" show?
# ls -l
total 5732
-rw-r--r-- 1 root root 150641 Apr 17 2007 Module.symvers
-rw-r--r-- 1 root root 928127 Apr 17
> > make: *** No rule to make target `menuconfig'. Stop.
>
> what does "ls" show?
# ls -l
total 7652
-rw-r--r-- 1 root root18693 Nov 30 10:26 COPYING
-rw-r--r-- 1 root root91435 Nov 30 10:26 CREDITS
drwxr-xr-x 64 root root12288 Nov 30 10:26 Documentation
-rw-r--r-- 1 root root
I haven't put much time into this, unfortunately, but am getting blocked
packages when emerging gnome. Just kinda throwing this out there, I'll
hopefully be able to do some research later today and add to this post:
arrakis ~ #
arrakis ~ #
arrakis ~ # emerge -DuN gnome
Calculating dependencies
Quoting Grant <[EMAIL PROTECTED]>:
make: *** No rule to make target `menuconfig'. Stop.
what does "ls" show?
perhaps your HDD has decided to retire early?
or a hacker deleted a lot of your stuff?
or /usr/src/linux -> points to something else
what's in /usr/src ?
--
[EMAIL PROTECTED] mai
> > If I wasn't hacked, this kind of strange behavior would have to be a
> > hardware or filesystem problem right? What are the best ways to check
> > for that? Just fsck?
>
> dmesg, /var/log/syslog and /var/log/messages. Look for IDE or SATA
> timeouts, or kernel panics.
Nothing in the logs jum
Quoting Grant <[EMAIL PROTECTED]>:
$ firefox-bin
/usr/libexec/mozilla-launcher: line 368:
/opt/firefox/mozilla-xremote-client: No such file or directory
Does this sound like a problem caused by my selecting an amd64
non-multilib profile? That's what I'm getting from the
from what I remember,
Quoting Grant <[EMAIL PROTECTED]>:
If I wasn't hacked, this kind of strange behavior would have to be a
hardware or filesystem problem right? What are the best ways to check
for that? Just fsck?
dmesg, /var/log/syslog and /var/log/messages. Look for IDE or SATA
timeouts, or kernel panics.
Quoting Grant <[EMAIL PROTECTED]>:
also look for strange kernel modules
How can I do that?
One way is to test what's in your /lib/modules with what's in your
kernel source:
[cmds]
(cd /lib/modules/$( uname -r )/build/; find -type f -name '*.ko')|sort
> /tmp/t1
(cd /lib/modules/$( un
> > I can't believe it but I get the same error with wengo:
> >
> > $ wengophone
> > /opt/bin/wengophone: line 10: /opt/wengophone/qtwengophone: No such
> > file or directory
> > /opt/bin/wengophone: line 10: /opt/wengophone/qtwengophone: Success
> >
> > Maybe a hardened profile on a laptop is more
Hi,
after installed (after unmasking)
x11-libs/wxGTK-2.6.4.0-r2
dev-python/wxpython-2.6.4.0-r1
app-admin/eselect-wxwidgets-0.5
import wx
doesn't work anymore.
eselect wxwidgets show
shows
gtk2-ansi-release-2.6
What went wrong / what am I missing?
Many thanks for a hint,
Helmut Jarausch
Hello
,
On Tue, Dec 04, 2007 at 02:58:04PM -0800, Grant wrote:
> I can't believe it but I get the same error with wengo:
>
> $ wengophone
> /opt/bin/wengophone: line 10: /opt/wengophone/qtwengophone: No such
> file or directory
> /opt/bin/wengophone: line 10: /opt/wengophone/qtwengophone: Success
41 matches
Mail list logo