s the default if no format has been given, leave it out entirely.
Signed-off-by: Thomas Zimmermann
Cc: Neil Armstrong
Cc: Kevin Hilman
Cc: Jerome Brunet
Cc: Martin Blumenstingl
---
drivers/gpu/drm/meson/meson_drv.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gp
On 16/08/2024 14:22, Thomas Zimmermann wrote:
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
Signed-off-by: Thomas Zimmermann
Cc: Neil Armstrong
Cc: Jessica
On 16/08/2024 14:22, Thomas Zimmermann wrote:
Call drm_client_setup() to run the kernel's default client setup
for DRM. Set fbdev_probe in struct drm_driver, so that the client
setup can start the common fbdev client.
Signed-off-by: Thomas Zimmermann
Cc: Neil Armstrong
Cc: Jessica
select DRM_DISPLAY_HELPER
help
Say Y here if you want to enable support for LG sw43408 panel.
The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
Reviewed-by: Neil Armstrong
On 22/05/2024 08:25, Dmitry Baryshkov wrote:
Fix sparse warning regarding symbol 'sw43408_backlight_ops' not being
declared.
Reported-by: kernel test robot
Closes:
https://lore.kernel.org/oe-kbuild-all/202404200739.hbwzvohr-...@intel.com/
Reviewed-by: Neil Armstrong
Fixes: 069a6c0e
On 08/03/2024 17:03, Jani Nikula wrote:
lt9611uxc_connector_get_modes() propagates the return value of
drm_edid_connector_add_modes() but stores the int temporarily in an
unsigned int. Use the correct type.
Cc: Andrzej Hajda
Cc: Neil Armstrong
Cc: Robert Foss
Signed-off-by: Jani Nikula
other counts leading to
bogus values.
On the other hand, many of the struct drm_panel_funcs .get_modes() hooks
do return negative error codes, so handle them gracefully instead of
propagating further.
Return 0 for no modes, whatever the reason.
Cc: Neil Armstrong
Cc: Jessica Zhang
Cc: Sam
-foundation.org
S:Maintained
T:git git://anongit.freedesktop.org/drm/drm-misc
+F: drivers/gpu/drm/ci/xfails/virtio*
F:drivers/gpu/drm/virtio/
F:include/uapi/linux/virtio_gpu.h
Reviewed-by: Neil Armstrong
On 29/07/2023 02:49, Dmitry Baryshkov wrote:
If the created connector type supports subconnector type property,
create and attach corresponding it. The default subtype value is 0,
which maps to the DRM_MODE_SUBCONNECTOR_Unknown type.
Signed-off-by: Dmitry Baryshkov
---
drivers/gpu/drm/drm_bri
Hi,
On Tue, 24 Jan 2023 12:45:47 +0200, Dmitry Baryshkov wrote:
> Extract drm_kms_helper_enable_hpd() and drm_kms_helper_disable_hpd(),
> two helpers that enable and disable HPD handling on all device's
> connectors.
>
>
Thanks, Applied to https://anongit.freedesktop.org/git/drm/drm-misc.git
(
Hi,
On 24/01/2023 11:45, Dmitry Baryshkov wrote:
There are two flags attemting to guard connector polling:
poll_enabled and poll_running. While poll_enabled semantics is clearly
defined and fully adhered (mark that drm_kms_helper_poll_init() was
called and not finalized by the _fini() call), the
tor_helper_funcs *funcs =
- connector->helper_private;
-
- if (funcs && funcs->disable_hpd)
- funcs->disable_hpd(connector);
- }
- drm_connector_list_iter_end(&conn_iter);
+ drm_kms_helper_disable_hpd(dev);
cancel_delayed_work_sync(&dev->mode_config.output_poll_work);
}
Reviewed-by: Neil Armstrong
Karlman
> Cc: Jonathan Hunter
> Cc: Joonas Lahtinen
> Cc: Kevin Hilman
> Cc: Laurent Pinchart
> Cc: linux-amlo...@lists.infradead.org
> Cc: linux-arm-ker...@lists.infradead.org
> Cc: linux-te...@vger.kernel.org
> Cc: Martin Blumenstingl
> Cc: Neil Armstrong
>
;
> Signed-off-by: Thomas Zimmermann
> ---
...
> drivers/gpu/drm/meson/meson_drv.c | 2 +-
Acked-by: Neil Armstrong
...
>
> diff --git a/drivers/gpu/drm/meson/meson_drv.c
> b/drivers/gpu/drm/meson/meson_drv.c
> index a7388bf7c838..3d0ccc7eef1b
Hi,
On 30/06/2020 23:27, Anitha Chrisanthus wrote:
> This is a new DRM driver for Intel's KeemBay SOC.
> The SoC couples an ARM Cortex A53 CPU with an Intel
> Movidius VPU.
>
> This driver is tested with the KMB EVM board which is the refernce baord
> for Keem Bay SOC. The SOC's display pipeline
Hi,
On 19/02/2020 11:20, Daniel Vetter wrote:
> We have lots of these. And the cleanup code tends to be of dubious
> quality. The biggest wrong pattern is that developers use devm_, which
> ties the release action to the underlying struct device, whereas
> all the userspace visible stuff attached
On 19/02/2020 11:21, Daniel Vetter wrote:
> It's right above the drm_dev_put().
>
> Aside: This driver gets its devm_ stuff all wrong wrt drm_device and
> anything hanging off that. Not the only one unfortunately.
>
> Signed-off-by: Daniel Vetter
> Cc: Neil Armstrong
Hi Dariusz, Hans,
I can apply the dw-hdmi patches if necessary.
Neil
On 19/08/2019 11:38, Hans Verkuil wrote:
> Hi all,
>
> The patches in this series can be applied independently from each other.
>
> If you maintain one of these drivers and you want to merge it for v5.4
> yourself, then pleas
Hi Andrzej,
I had to revert the previous patch, so you should re-spin it entirely :
After merging the drm-misc tree, today's linux-next build (x86_64
allmodconfig) failed like this:
drivers/gpu/drm/radeon/radeon_connectors.c: In function
'radeon_add_legacy_conne
Hi Andrzej,
On 31/07/2019 16:22, Neil Armstrong wrote:
> On 31/07/2019 15:10, Andrzej Pietrasiewicz wrote:
>> W dniu 31.07.2019 o 12:40, Sam Ravnborg pisze:
>>> Hi Neil.
>>>
>>> On Wed, Jul 31, 2019 at 10:00:14AM +0200, Neil Armstrong wrote:
>>>
On 31/07/2019 15:10, Andrzej Pietrasiewicz wrote:
> W dniu 31.07.2019 o 12:40, Sam Ravnborg pisze:
>> Hi Neil.
>>
>> On Wed, Jul 31, 2019 at 10:00:14AM +0200, Neil Armstrong wrote:
>>> Hi Sam,
>>>
>>> On 26/07/2019 20:55, Sam Ravnborg wrote:
>
Hi Sam,
On 26/07/2019 20:55, Sam Ravnborg wrote:
> Hi all.
>
> Andrzej have done a good job following up on feedback and this series is
> now ready.
>
> We need ack on the patches touching the individual drivers before we can
> proceed.
> Please check your drivers and get back.
I can apply all
Hi,
On 30/07/2019 19:30, Sam Ravnborg wrote:
> Hi Neil.
>
>>> Signed-off-by: Andrzej Pietrasiewicz
>>> ---
>>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 40 +++
>>> 1 file changed, 20 insertions(+), 20 deletions(-)
>>>
ctor_type);
> + ret = drm_connector_init_with_ddc(bridge->dev, &dvi->connector,
> + &tfp410_con_funcs,
> + dvi->connector_type,
> + dvi->ddc);
> if (ret) {
>
> if (ret) {
> DRM_ERROR("Failed to initialize connector\n");
> return ret;
>
Reviewed-by: Neil Armstrong
___
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
return ret;
> @@ -382,8 +381,8 @@ static int tfp410_fini(struct device *dev)
>
> drm_bridge_remove(&dvi->bridge);
>
> - if (dvi->ddc)
> - i2c_put_adapter(dvi->ddc);
> + if (dvi->connector.ddc)
> + i2c_put_adapter(dvi->connector.ddc);
> if (dvi->hpd)
> gpiod_put(dvi->hpd);
>
>
Reviewed-by: Neil Armstrong
___
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
>adap);
> - hdmi->ddc = NULL;
> + hdmi->connector.ddc = NULL;
> }
>
> if (hdmi->cec_notifier)
> @@ -2788,7 +2788,7 @@ __dw_hdmi_probe(struct platform_device *pdev,
> err_isfr:
> clk_disable_unprepare(hdmi->isfr_clk);
> e
->ddc);
> + return PTR_ERR(vga->connector.ddc);
> }
> }
>
> @@ -216,8 +215,8 @@ static int dumb_vga_remove(struct platform_device *pdev)
>
> drm_bridge_remove(&vga->bridge);
>
> - if (!IS_ERR(vga->ddc))
> - i2c_put_adapter(vga->ddc);
> + if (!IS_ERR(vga->connector.ddc))
> + i2c_put_adapter(vga->connector.ddc);
>
> return 0;
> }
>
Reviewed-by: Neil Armstrong
___
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
On 14/06/2019 22:35, Daniel Vetter wrote:
> They're the default.
>
> Aside: Would be really nice to switch the others over to
> drm_gem_object_funcs.
Yep, adding this to my infinite TODO list
>
> Signed-off-by: Daniel Vetter
> Cc: Neil Armstrong
> Cc: K
drivers/gpu/drm/mediatek/mtk_dpi.c| 2 +-
> drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 2 +-
> drivers/gpu/drm/mediatek/mtk_drm_drv.c| 2 +-
> drivers/gpu/drm/mediatek/mtk_drm_fb.c | 2 +-
> drivers/gpu/drm/mediatek/mtk_dsi.c| 2 +-
> d
S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + * OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +#ifndef __DRM_PROBE_HELPER_H__
> +#define _
be applied to another tree,
but who is suposed to take this PR to the DRM tree ?
Neil
>
> --------
> Neil Armstrong (6):
> media: cec-notifier: Get notifier by device and connector name
> drm/i915: hdmi: add CEC not
Hi Lee,
On 12/07/2018 14:26, Lee Jones wrote:
> On Wed, 04 Jul 2018, Neil Armstrong wrote:
>
>> Hi All,
>>
>> The new Google "Fizz" Intel-based ChromeOS device is gaining CEC support
>> through it's Embedded Controller, to enable the Linux CEC C
The EC can expose a CEC bus, this patch adds the CEC related definitions
needed by the cros-ec-cec driver.
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
Reviewed-by: Hans Verkuil
Acked-for-MFD-by: Lee Jones
---
include/linux/mfd/cros_ec_commands.h | 81
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
when the CEC feature bit is present.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
Acked-by: Hans Verkuil
Acked-for-MFD-by: Lee Jones
---
drivers/mfd/cros_ec_dev.c | 16
1 file changed
and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
Reviewed-by: Hans
This patchs adds the cec_notifier feature to the intel_hdmi part
of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
between each HDMI ports.
The changes will allow the i915 HDMI code to notify EDID and HPD changes
to an eventual CEC adapter.
Signed-off-by: Neil Armstrong
least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.
Signed-off-by: Neil Armstrong
Reviewed-by: Hans Verkuil
---
drivers/media/cec/cec-notifier.c | 11
- Added comment about HW support
- Removed memset of msg structures
Neil Armstrong (6):
media: cec-notifier: Get notifier by device and connector name
drm/i915: hdmi: add CEC notifier to intel_hdmi
mfd: cros-ec: Increase maximum mkbp event size
mfd: cros-ec: Introduce CEC commands and e
Having a 16 byte mkbp event size makes it possible to send CEC
messages from the EC to the AP directly inside the mkbp event
instead of first doing a notification and then a read.
Signed-off-by: Stefan Adolfsson
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
Acked-by: Hans
Hi Lee,
On 04/07/2018 09:47, Lee Jones wrote:
> On Fri, 01 Jun 2018, Neil Armstrong wrote:
>
>> The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
>> when the CEC feature bit is present.
>>
>> Signed-off-by: Neil Armstrong
>> Reviewed-by:
Hi Lee,
On 03/07/2018 11:43, Lee Jones wrote:
> On Mon, 18 Jun 2018, Neil Armstrong wrote:
>
>> Hi Lee,
>>
>> On 18/06/2018 09:44, Lee Jones wrote:
>>> On Fri, 01 Jun 2018, Neil Armstrong wrote:
>>>
>>>> Having a 16 byte mkbp event size make
Hi Lee,
On 18/06/2018 09:44, Lee Jones wrote:
> On Fri, 01 Jun 2018, Neil Armstrong wrote:
>
>> Having a 16 byte mkbp event size makes it possible to send CEC
>> messages from the EC to the AP directly inside the mkbp event
>> instead of first doing a notification and t
Hi Lee,
On 11/06/2018 08:03, Lee Jones wrote:
> On Fri, 08 Jun 2018, Hans Verkuil wrote:
>> On 08/06/18 10:17, Neil Armstrong wrote:
>>> On 08/06/2018 09:53, Hans Verkuil wrote:
>>>> On 06/01/2018 10:19 AM, Neil Armstrong wrote:
>>>>> Hi All,
>>&
Hi Hans,
On 08/06/2018 09:53, Hans Verkuil wrote:
> On 06/01/2018 10:19 AM, Neil Armstrong wrote:
>> Hi All,
>>
>> The new Google "Fizz" Intel-based ChromeOS device is gaining CEC support
>> through it's Embedded Controller, to enable the Linux CEC Core
and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
Reviewed-by: Hans
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
when the CEC feature bit is present.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
Acked-by: Hans Verkuil
---
drivers/mfd/cros_ec_dev.c | 16
1 file changed, 16 insertions(+)
diff --git
The EC can expose a CEC bus, this patch adds the CEC related definitions
needed by the cros-ec-cec driver.
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
Reviewed-by: Hans Verkuil
---
include/linux/mfd/cros_ec_commands.h | 81
1 file
EC core return type on error
- Moved to cros-ec-cec media platform directory
- Use bus_find_device() to find the pci i915 device instead of
get_notifier_get_byname()
- Fix Logical Address setup
- Added comment about HW support
- Removed memset of msg structures
Neil Armstrong (6):
me
This patchs adds the cec_notifier feature to the intel_hdmi part
of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
between each HDMI ports.
The changes will allow the i915 HDMI code to notify EDID and HPD changes
to an eventual CEC adapter.
Signed-off-by: Neil Armstrong
Having a 16 byte mkbp event size makes it possible to send CEC
messages from the EC to the AP directly inside the mkbp event
instead of first doing a notification and then a read.
Signed-off-by: Stefan Adolfsson
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
---
drivers
least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.
Signed-off-by: Neil Armstrong
Reviewed-by: Hans Verkuil
---
drivers/media/cec/cec-notifier.c | 11
On 31/05/2018 01:26, Rodrigo Vivi wrote:
> On Wed, May 30, 2018 at 06:29:36PM +0300, Ville Syrjälä wrote:
>> On Thu, May 24, 2018 at 11:57:17AM +0200, Neil Armstrong wrote:
>>> This patchs adds the cec_notifier feature to the intel_hdmi part
>>> of the i915 DRM d
On 30/05/2018 17:29, Ville Syrjälä wrote:
> On Thu, May 24, 2018 at 11:57:17AM +0200, Neil Armstrong wrote:
>> This patchs adds the cec_notifier feature to the intel_hdmi part
>> of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
>> between each HDMI
and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
Reviewed-by: Hans
yname()
- Fix Logical Address setup
- Added comment about HW support
- Removed memset of msg structures
Neil Armstrong (6):
media: cec-notifier: Get notifier by device and connector name
drm/i915: hdmi: add CEC notifier to intel_hdmi
mfd: cros-ec: Increase maximum mkbp event size
mf
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
when the CEC feature bit is present.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
---
drivers/mfd/cros_ec_dev.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/mfd
least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.
Signed-off-by: Neil Armstrong
---
drivers/media/cec/cec-notifier.c | 11 ---
include/media/cec
least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.
Signed-off-by: Neil Armstrong
Reviewed-by: Hans Verkuil
---
drivers/media/cec/cec-notifier.c | 11
Having a 16 byte mkbp event size makes it possible to send CEC
messages from the EC to the AP directly inside the mkbp event
instead of first doing a notification and then a read.
Signed-off-by: Stefan Adolfsson
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
---
drivers
This patchs adds the cec_notifier feature to the intel_hdmi part
of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
between each HDMI ports.
The changes will allow the i915 HDMI code to notify EDID and HPD changes
to an eventual CEC adapter.
Signed-off-by: Neil Armstrong
On 24/05/2018 11:11, Hans Verkuil wrote:
> On 24/05/18 10:54, Neil Armstrong wrote:
>> The EC can expose a CEC bus, this patch adds the CEC related definitions
>> needed by the cros-ec-cec driver.
>>
>> Signed-off-by: Neil Armstrong
>> Tested-by: Enric Balletbo
and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
---
drivers/media
The EC can expose a CEC bus, this patch adds the CEC related definitions
needed by the cros-ec-cec driver.
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
---
include/linux/mfd/cros_ec_commands.h | 81
1 file changed, 81 insertions(+)
diff
return type on error
- Moved to cros-ec-cec media platform directory
- Use bus_find_device() to find the pci i915 device instead of
get_notifier_get_byname()
- Fix Logical Address setup
- Added comment about HW support
- Removed memset of msg structures
Neil Armstrong (6):
media: cec-n
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
when the CEC feature bit is present.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
---
drivers/mfd/cros_ec_dev.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/mfd
Having a 16 byte mkbp event size makes it possible to send CEC
messages from the EC to the AP directly inside the mkbp event
instead of first doing a notification and then a read.
Signed-off-by: Stefan Adolfsson
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
---
drivers
This patchs adds the cec_notifier feature to the intel_hdmi part
of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
between each HDMI ports.
The changes will allow the i915 HDMI code to notify EDID and HPD changes
to an eventual CEC adapter.
Signed-off-by: Neil Armstrong
The EC can expose a CEC bus, this patch adds the CEC related definitions
needed by the cros-ec-cec driver.
Signed-off-by: Neil Armstrong
Tested-by: Enric Balletbo i Serra
---
include/linux/mfd/cros_ec_commands.h | 85
1 file changed, 85 insertions(+)
diff
Hi Benson,
On 24/05/2018 07:47, Benson Leung wrote:
> Hi Neil, Hi Stefan,
>
> On Fri, May 18, 2018 at 03:05:02PM +0200, Neil Armstrong wrote:
>> The EC can expose a CEC bus, this patch adds the CEC related definitions
>> needed by the cros-ec-cec driver.
>> Having a 16
vice() to find the pci i915 device instead of
get_notifier_get_byname()
- Fix Logical Address setup
- Added comment about HW support
- Removed memset of msg structures
Neil Armstrong (5):
media: cec-notifier: Get notifier by device and connector name
drm/i915: hdmi: add CEC notifier to intel_hd
-by: Stefan Adolfsson
Signed-off-by: Neil Armstrong
---
drivers/platform/chrome/cros_ec_proto.c | 40 ++---
include/linux/mfd/cros_ec.h | 2 +-
include/linux/mfd/cros_ec_commands.h| 103
3 files changed, 135 insertions(+), 10 deletions
least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.
Signed-off-by: Neil Armstrong
---
drivers/media/cec/cec-notifier.c | 11 ---
include/media/cec
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
when the CEC feature bit is present.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
---
drivers/mfd/cros_ec_dev.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/mfd
This patchs adds the cec_notifier feature to the intel_hdmi part
of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
between each HDMI ports.
The changes will allow the i915 HDMI code to notify EDID and HPD changes
to an eventual CEC adapter.
Signed-off-by: Neil Armstrong
and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong
Reviewed-by: Enric Balletbo i Serra
---
drivers/media
On 18/05/2018 16:04, Enric Balletbo Serra wrote:
> Hi Neil,
>
> 2018-05-18 15:04 GMT+02:00 Neil Armstrong :
>> Hi All,
>>
>> The new Google "Fizz" Intel-based ChromeOS device is gaining CEC support
>> through it's Embedded Controller, to enable the
Hi Enric,
On 18/05/2018 17:02, Enric Balletbo Serra wrote:
> Hi Neil,
>
> 2018-05-18 15:05 GMT+02:00 Neil Armstrong :
>> The Chrome OS Embedded Controller can expose a CEC bus, this patch add the
>
> A minor nit, there is a "consensus" on tell cros-ec as &quo
Hi Enric,
On 18/05/2018 18:19, Enric Balletbo Serra wrote:
> Hi Neil,
>
> 2018-05-18 15:05 GMT+02:00 Neil Armstrong :
>> The EC can expose a CEC bus, this patch adds the CEC related definitions
>> needed by the cros-ec-cec driver.
>> Having a 16 byte mkbp event size ma
Hi Ville,
On 18/05/2018 15:24, Ville Syrjälä wrote:
> On Fri, May 18, 2018 at 03:05:01PM +0200, Neil Armstrong wrote:
>> This patchs adds the cec_notifier feature to the intel_hdmi part
>> of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
>> be
Hi Sean,
On 18/05/2018 17:48, Sean Paul wrote:
> On Fri, May 18, 2018 at 03:05:00PM +0200, Neil Armstrong wrote:
>> In non device-tree world, we can need to get the notifier by the driver
>> name directly and eventually defer probe if not yet created.
>>
>> This patc
address and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong
---
drivers/media/platform/Kconfig | 11
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
when the CEC feature bit is present.
Signed-off-by: Neil Armstrong
---
drivers/mfd/cros_ec_dev.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index
least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.
Signed-off-by: Neil Armstrong
---
drivers/media/cec/cec-notifier.c | 11 ---
include/media/cec
-by: Stefan Adolfsson
Signed-off-by: Neil Armstrong
---
drivers/platform/chrome/cros_ec_proto.c | 40 +
include/linux/mfd/cros_ec.h | 2 +-
include/linux/mfd/cros_ec_commands.h| 80 +
3 files changed, 112 insertions(+), 10 deletions
This patchs adds the cec_notifier feature to the intel_hdmi part
of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
between each HDMI ports.
The changes will allow the i915 HDMI code to notify EDID and HPD changes
to an eventual CEC adapter.
Signed-off-by: Neil Armstrong
core return type on error
- Moved to cros-ec-cec media platform directory
- Use bus_find_device() to find the pci i915 device instead of
get_notifier_get_byname()
- Fix Logical Address setup
- Added comment about HW support
- Removed memset of msg structures
Neil Armstrong (5):
media: cec-
Hi Ville,
On 16/05/2018 16:07, Ville Syrjälä wrote:
> On Wed, May 16, 2018 at 09:40:17AM +0200, Neil Armstrong wrote:
>> On 16/05/2018 09:31, Neil Armstrong wrote:
>>> Hi Ville,
>>>
>>> On 15/05/2018 17:35, Ville Syrjälä wrote:
>>>> On Tue, May 15
Hi Hans,
On 15/05/2018 17:28, Hans Verkuil wrote:
> On 05/15/2018 04:42 PM, Neil Armstrong wrote:
>> The EC can expose a CEC bus, this patch adds the CEC related definitions
>> needed by the cros-ec-cec driver.
>> Having a 16 byte mkbp event size makes it possible to send CEC
found your patches, I'll rebase this one when Lee pushes them in his
tree.
>
> Based on some reviews I got when I send a patch to this file ...
>
> 2018-05-15 17:29 GMT+02:00 Hans Verkuil :
>> On 05/15/2018 04:42 PM, Neil Armstrong wrote:
>>> The EC can expose a CEC
On 16/05/2018 09:31, Neil Armstrong wrote:
> Hi Ville,
>
> On 15/05/2018 17:35, Ville Syrjälä wrote:
>> On Tue, May 15, 2018 at 04:42:19PM +0200, Neil Armstrong wrote:
>>> This patchs adds the cec_notifier feature to the intel_hdmi part
>>> of the i915 DRM drive
Hi Ville,
On 15/05/2018 17:35, Ville Syrjälä wrote:
> On Tue, May 15, 2018 at 04:42:19PM +0200, Neil Armstrong wrote:
>> This patchs adds the cec_notifier feature to the intel_hdmi part
>> of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
>> be
On 15/05/2018 17:22, Hans Verkuil wrote:
> On 05/15/2018 04:42 PM, Neil Armstrong wrote:
>> In non device-tree world, we can need to get the notifier by the driver
>> name directly and eventually defer probe if not yet created.
>>
>> This patch adds a variant of th
address and handles
all the messages retries and will only expose Success or Error.
The controller will be tied to the HDMI CEC notifier by using the platform
DMI Data and the i915 device name and connector name.
Signed-off-by: Neil Armstrong
---
drivers/media/platform/Kconfig | 11
The EC can expose a CEC bus, thus add the cros-ec-cec MFD sub-device
when the CEC feature bit is present.
Signed-off-by: Neil Armstrong
---
drivers/mfd/cros_ec_dev.c | 16
1 file changed, 16 insertions(+)
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index
-by: Stefan Adolfsson
Signed-off-by: Neil Armstrong
---
drivers/platform/chrome/cros_ec_proto.c | 42 +
include/linux/mfd/cros_ec.h | 2 +-
include/linux/mfd/cros_ec_commands.h| 80 +
3 files changed, 114 insertions(+), 10 deletions
This patchs adds the cec_notifier feature to the intel_hdmi part
of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
between each HDMI ports.
The changes will allow the i915 HDMI code to notify EDID and HPD changes
to an eventual CEC adapter.
Signed-off-by: Neil Armstrong
least 2 HDMI connectors, this patch also
adds the possibility to add a connector name tied to the notifier device
to form a tuple and associate different CEC controllers for each HDMI
connectors.
Signed-off-by: Neil Armstrong
---
drivers/media/cec/cec-notifier.c | 11 ---
include/media/cec
Moved to cros-ec-cec media platform directory
- Use bus_find_device() to find the pci i915 device instead of
get_notifier_get_byname()
- Fix Logical Address setup
- Added comment about HW support
- Removed memset of msg structures
Neil Armstrong (5):
media: cec-notifier: Get notifier by devic
Hi,
On 15/05/2018 14:56, Hans Verkuil wrote:
> On 05/15/18 14:46, Neil Armstrong wrote:
>> This patchs adds the cec_notifier feature to the intel_hdmi part
>> of the i915 DRM driver. It uses the HDMI DRM connector name to differentiate
>> between each HDMI ports.
>>
1 - 100 of 139 matches
Mail list logo