From: "Yong-hyu, Ban"
Signed-off-by: Yong-hyu, Ban
---
Changelog:
v2: Fix signed-off name to real name.
target/linux/ramips/base-files/etc/board.d/02_network | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target
Signed-off-by: perillamint
---
target/linux/ramips/base-files/etc/board.d/02_network | 5 -
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index e3e6550..9701b5a 100755
Just tried 10.2.4.70.58 firmware that you linked to and it still crashes:
[ 131.568989] ath10k_pci :01:00.0: firmware crashed! (uuid
1838347e-9380-4a26-ac9d-2963ee95968b)
[ 131.578124] ath10k_pci :01:00.0: qca988x hw2.0 target 0x4100016c
chip_id 0x043202ff sub :
[ 131.587491]
Prevent from erasing the pinmux of HW ephy LEDs in BCM6368
In BCM6368 CFE configures the HW controled LEDs for the switch
by setting the required GPIO pinmux. But in OpenWrt when the
peripherals are initialized, the code is erasing the pinmux previously
configured by CFE.
Just don't erase those
Dear Bjørn,
please join the discussion directly on the github code:
https://github.com/lede-project/source/pull/585
Bye.
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
Hi Felix,
2016-12-02 6:32 GMT-08:00 Felix Fietkau :
>
> Hi Etienne,
>
> what value would you suggest as a default? I should probably make it
> configurable on the command line as well.
For service handling data we might loose data, so maybe no default at
all unless it's configured.
I would also c
On 2016-12-02 18:54, Joe Ayers wrote:
> Felix,
>
> + update to NBM5/16 in table below.
>
> I am running your staging, usually takes a ~day to see a failure. No
> news means no failure to current time.
>
> testing on NS Loco M5 XW:
> [0.00] Linux version 4.4.35 (joe@AE6XE-PE) (gcc ver
Hi Etienne,
what value would you suggest as a default? I should probably make it
configurable on the command line as well.
- Felix
On 2016-12-02 15:25, Etienne Champetier wrote:
> Hi Felix,
>
> Just had a look at the code and 1sec of timeout seems a bit low for me
> for an hard coded value, and
On 12/01/2016 10:29 PM, Rafał Miłecki wrote:
> On 1 December 2016 at 12:48, Zefir Kurtisi wrote:
>> On 12/01/2016 08:28 AM, Rafał Miłecki wrote:
>>> So you still may end up with base-files installed and /etc/banner
>>> being different. If you re-install that package, e.g.
>>> opkg install base-fil
2016-11-24 13:05 GMT+01:00 Dennis Schneck :
> Hello,
> i try to upgrade my Image on my VGV7510KW22
>
> Running: r2244
>
> root@router:/tmp# wget
> http://downloads.lede-project.org/snapshots/targets/lantiq/xrx200/lede-lantiq-xrx200-VGV7510KW22NOR-squashfs-sys
> upgrade.bin
> Downloading
> 'http:/
https://github.com/lede-project/source/commit/929641fa1fb23942581f64e6fa75ba87ba6111af
Probably you should backup your configuration and then flash using mtd
On Thu, Nov 24, 2016 at 1:21 PM, Dennis Schneck wrote:
>
> Hello,
> i try to upgrade my Image on my VGV7510KW22
>
> Running: r2244
>
> roo
Hello,
I have a question about wifi command in LEDE. When a route boot with a
new LEDE image, the raido is disabled and interface "wlan0" is down.
When I type "wifi disable radio0 ". It will delete the interface. Is
it possible not to delete the interface but only bring down it when i
type "wifi d
Hi Jow,
I tested your patch in my build and it seemd to work ok for the current
master branch. Also LuCI showed version info sensibly.
But you might clarify a bit the config option explanation texts. Especially
VERSION_CODE could be hard to understand If the reader does not know the
intended
On 2016-12-01 18:34, Jo-Philipp Wich wrote:
> Move the revision info to the VERSION_CODE variable and default VERSION_NUMBER
> to the release branch version or to CURRENT for master branch builds.
>
> Also introduce a new menuconfig option CONFIG_VERSION_CODE which allows users
> to override the r
@Alexandru, @Stijn, its possible, my entire hard disk is encrypted. i
am running ubuntu in a virtualbox. Other machine do not have encrypted
disk.
sudeepto@ubuntu:~$ uname -a
Linux ubuntu 3.18.33 #1 SMP Thu May 12 14:38:20 IST 2016 x86_64 x86_64
x86_64 GNU/Linux
On Fri, Dec 2, 2016 at 3:06 P
Hi Baptiste,
good point - will do.
~ Jo
signature.asc
Description: OpenPGP digital signature
___
Lede-dev mailing list
Lede-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/lede-dev
Hi jow,
On Thu, Dec 01, 2016 at 06:34:42PM +0100, Jo-Philipp Wich wrote:
> After this commit, the relevent files will look like the examples given below:
> # cat /usr/lib/os-release
> NAME="LEDE"
> VERSION="CURRENT, Reboot"
> ID="lede"
> ID_LIKE="lede openwrt"
> PRETTY_NAME
"Giuseppe Lippolis" writes:
> Dear Bjørn, Matti,
>
>> I don't think it is relevant for you, though. You should continue your
>> initial
>> idea, creating a "proto" supporting the AT managed cdc_ether based
>> modem.
>
> I add a pull request here:
>
> https://github.com/lede-project/source/pull/
On Fri, Dec 2, 2016 at 10:48 AM, Sudeepto Roy gmail.com> wrote:
Hi,
on my setup i am having trouble building openssl and the reason is a
creation if a file whose file name is bigger then 144 char.
make[5]: Leaving directory
`/home/sudeepto/Documents/projects/lede/source/build_dir/target-mips_
On Fri, Dec 2, 2016 at 10:48 AM, Sudeepto Roy wrote:
> Hi,
>
> on my setup i am having trouble building openssl and the reason is a
> creation if a file whose file name is bigger then 144 char.
>
> make[5]: Leaving directory
> `/home/sudeepto/Documents/projects/lede/source/build_dir/target-mi
Hi,
on my setup i am having trouble building openssl and the reason is a
creation if a file whose file name is bigger then 144 char.
>>>
make[5]: Leaving directory
`/home/sudeepto/Documents/projects/lede/source/build_dir/target-mips_24kc_musl-1.1.15/openssl-1.0.2j/apps'
make[4]: Leaving directory
21 matches
Mail list logo