On Wed, 2010-11-17 at 12:15 +0100, Damjan Marion wrote:
> On Oct 19, 2010, at 10:27 PM, Hans Verkuil wrote:
> > On Tuesday, October 19, 2010 21:26:13 Devin Heitmueller wrote:
> >> On Tue, Oct 19, 2010 at 1:42 PM, Damjan Marion
> >> wrote:
> >>>
> >>> Hi,
> >>>
> >>> Is there any special reason
Hi,
got this pretty confusing BUG, probably triggered by drivers/media/dvb/siano. I
had
femon & kaffeine running in parallel. In kaffeine output stopped so I did quit
kaffeine,
unplugged the DVB stick and reconnected:
Nov 18 15:00:05 localhost kernel: [116557.045363] usb 5-5: USB disconnect,
Em 18-11-2010 18:49, Jarod Wilson escreveu:
> On Thu, Nov 18, 2010 at 09:43:19PM +0100, David Härdeman wrote:
>> On Thu, Nov 18, 2010 at 11:33:04AM -0500, Jarod Wilson wrote:
>>> Mauro's suggestion, iirc, was that max scancode size should be a
>>> property of the keytable uploaded, and something se
On Thu, Nov 18, 2010 at 09:43:19PM +0100, David Härdeman wrote:
> On Thu, Nov 18, 2010 at 11:33:04AM -0500, Jarod Wilson wrote:
> >Mauro's suggestion, iirc, was that max scancode size should be a
> >property of the keytable uploaded, and something set at load time (and
> >probably exposed as a sysf
On Thu, Nov 18, 2010 at 11:33:04AM -0500, Jarod Wilson wrote:
>Mauro's suggestion, iirc, was that max scancode size should be a
>property of the keytable uploaded, and something set at load time (and
>probably exposed as a sysfs node, similar to protocols).
I think that would be a step in the wron
On Thu, Nov 18, 2010 at 2:59 PM, Massis Sirapian wrote:
> Does it mean that the IR isn't wired in the case of HVR900H ? When you said
> that your Terratec equals the HVR900H, does it imply that if IR works on
> cinergy xe, it should on the HVR900H?
One thing you may wish to consider is that if I
Le 17/11/2010 20:33, Massis Sirapian a écrit :
load the tm6000 module with the parameter "ir_debug=1". (not the
tm6000_dvb), and check dmsg after you pressed a button. Have the
received code the same from the map?
I have only
[ 5232.133592] tm5600/60x0 IR (tm6000 #0)/ir: ir->get_key result
da
This message is generated daily by a cron job that builds v4l-dvb for
the kernels and architectures in the list below.
Results of the daily build of v4l-dvb:
date:Thu Nov 18 19:00:10 CET 2010
git master: 59365d136d205cc20fe666ca7f89b1c5001b0d5a
git media-master: gcc version: i6
Hello,
On Thursday, November 18, 2010 1:27 PM Andy Walls wrote:
> Hi Hans and Marek,
>
> Some meta-comments below... ;)
>
> On Thu, 2010-11-18 at 10:17 +0100, Hans Verkuil wrote:
> > Hi Marek!
> >
> > Some comments below...
> >
> > On Wednesday, November 17, 2010 09:39:28 Marek Szyprowski wrote
On Wed, Nov 17, 2010 at 12:26:36AM +0100, David Härdeman wrote:
> On Tue, Nov 16, 2010 at 10:08:29AM -0200, Mauro Carvalho Chehab wrote:
...
> >Also, changing the current tables to 32 bits will break userspace API, as all
> >userspace keytables for NEC will stop working, all due to a few vendors th
On Thu, Nov 18, 2010 at 10:29 AM, Hans Verkuil wrote:
>
>> On Thu, Nov 18, 2010 at 9:46 AM, Hans Verkuil wrote:
>>>
This driver has quite a few locking issues that would only be made
worse by your patch. A much better patch for this can be found here:
http://desource.dyndns.or
Hi Hans,
On Thu, Nov 18, 2010 at 01:17, Hans Verkuil wrote:
> Hi Marek!
>
> Some comments below...
>
> On Wednesday, November 17, 2010 09:39:28 Marek Szyprowski wrote:
>> From: Pawel Osciak
>> +/**
>> + * struct vb2_mem_ops - memory handling/memory allocator operations
>> + * @alloc: allocate
> On Thu, Nov 18, 2010 at 9:46 AM, Hans Verkuil wrote:
>>
>>> This driver has quite a few locking issues that would only be made
>>> worse by your patch. A much better patch for this can be found here:
>>>
>>> http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9a
Hello,
On Thursday, November 18, 2010 8:15 AM Sewoon Park wrote:
> Marek Szyprowski wrote:
> > Sent: Wednesday, November 17, 2010 5:40 PM
> > To: linux-media@vger.kernel.org
> > Cc: m.szyprow...@samsung.com; pa...@osciak.com; kyungmin.p...@samsung.com
> > Subject: [PATCH 4/7] v4l: videobuf2: add
On Thu, Nov 18, 2010 at 9:46 AM, Hans Verkuil wrote:
>
>> This driver has quite a few locking issues that would only be made
>> worse by your patch. A much better patch for this can be found here:
>>
>> http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9af46902c5
> This driver has quite a few locking issues that would only be made
> worse by your patch. A much better patch for this can be found here:
>
> http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9af46902c5f3d4d4cc80227d3f7c
Much too big for 2.6.37. I'll just drop
This driver has quite a few locking issues that would only be made
worse by your patch. A much better patch for this can be found here:
http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9af46902c5f3d4d4cc80227d3f7c
Regards,
David Ellingsworth
--
To unsubscribe
Hi,
sorry to bother you again, but I'm still in the course to get DVB/VDR
going _again_.
Hardware: 2 * Hauppauge WinTV-HVR4000(Lite),
1 * Hauppauge WinTV Nexus-S
Software: openSUSE 11.1/i586 with Kernel:HEAD 2.6.36-94.1
VDR 1.6.0-2
VDR is limited operational, some record
> Hi Hans and Marek,
>
> Some meta-comments below... ;)
>
> On Thu, 2010-11-18 at 10:17 +0100, Hans Verkuil wrote:
>> > +#define mem_ops(q, plane) ((q)->alloc_ctx[plane]->mem_ops)
>> > +
>> > +#define call_memop(q, plane, op, args...) \
>> > + (((q)->alloc_ctx[plane]->mem_
Try reverting the change that enabled MSI in cx23885.
R,
Andy
Hans Houwaard wrote:
>My issue was that the only PCIe 1X slot shared an IRQ with the onboard Sound
>card and that caused all kinds of problems. Also I had to power off my machine
>if I ever had problems with the DVB cards. They wou
Hi,
I'm using a DVB-S card Technotrend TT budget S-1500 in my production
environment (Debian, 2.6.26-2-686, MuMuDVB). I get the last v4l-dvb from
http://linuxtv.org/hg/v4l-dvb/.
Basically cards works OK, but I have repeatable error from the Kernel in Syslog:
Nov 18 11:40:11 hannibal kernel: [
Ohad,
> -Original Message-
> From: Ohad Ben-Cohen [mailto:o...@wizery.com]
> Sent: Thursday, November 18, 2010 2:36 AM
> To: Savoy, Pavan
> Cc: mche...@infradead.org; hverk...@xs4all.nl; Halli, Manjunatha; linux-
> ker...@vger.kernel.org; linux-media@vger.kernel.org; Greg KH
> Subject: Re
On Tuesday, November 16, 2010 14:18:12 manjunatha_ha...@ti.com wrote:
> From: Manjunatha Halli
>
> This has implementation for FM RX functionality.
> It communicates with FM V4l2 module and FM common module.
>
> Signed-off-by: Manjunatha Halli
> ---
> drivers/staging/ti-st/fmdrv_rx.c | 979
>
Hi Pavan,
> On Wed, Nov 17, 2010 at 6:32 PM, Ohad Ben-Cohen wrote:
>>> drivers/staging/ti-st/Kconfig | 10 +
>>> drivers/staging/ti-st/Makefile | 2 +
>>> drivers/staging/ti-st/fmdrv.h | 259
>>> drivers/staging/ti-st/fmdrv_common.c | 2141
>>>
My issue was that the only PCIe 1X slot shared an IRQ with the onboard Sound
card and that caused all kinds of problems. Also I had to power off my machine
if I ever had problems with the DVB cards. They would not function properly
after a warm reboot.
Good luck with the issues, my system is no
On Tuesday, November 16, 2010 14:18:11 manjunatha_ha...@ti.com wrote:
> From: Manjunatha Halli
>
> These are the sources for the common interfaces required by the FM
> V4L2 driver for TI WL127x and WL128x chips.
>
> These implement the FM channel-8 protocol communication with
> the chip. This ma
26 matches
Mail list logo
