On 02/14/2014 11:41 AM, Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
In __reqbufs() and __create_bufs() the q-num_buffers field was updated
with the number of newly allocated buffers, but right after that those are
freed again if some error had occurred before. Move the line
On 02/14/2014 11:41 AM, Hans Verkuil wrote:
From: Hans Verkuil hans.verk...@cisco.com
In commit 02f142ecd24aaf891324ffba8527284c1731b561 support was added to
start_streaming to return -ENOBUFS if insufficient buffers were queued
for the DMA engine to start. The vb2 core would attempt calling
Some devices do not produce timestamps that correspond to the end of the
frame. The user space should be informed on the matter. This patch achieves
that by adding buffer flags (and a mask) for timestamp sources since more
possible timestamping points are expected than just two.
A three-bit mask
On Thu, Feb 20, 2014 at 09:25:47PM +0100, Hans Verkuil wrote:
On 02/20/2014 08:42 PM, Sakari Ailus wrote:
Timestamp buffer flags are constant at the moment. Document them so that 1)
they're always valid and 2) not changed by the drivers. This leaves room to
extend the functionality later on
On 02/23/2014 11:40 AM, Sakari Ailus wrote:
Some devices do not produce timestamps that correspond to the end of the
frame. The user space should be informed on the matter. This patch achieves
that by adding buffer flags (and a mask) for timestamp sources since more
possible timestamping
Am 23.02.2014 06:54, schrieb Peter Ross:
PATCHv1 discussion:
http://sourceforge.net/mailarchive/message.php?msg_id=31541036
and
http://article.gmane.org/gmane.linux.drivers.video-input-infrastructure/70192
On Sun, Oct 20, 2013 at 11:54:10AM +0200, Oleksij Rempel wrote
[..]
Hello
On 02/15/2014 09:53 PM, Sakari Ailus wrote:
Timestamp buffer flags are constant at the moment. Document them so that 1)
they're always valid and 2) not changed by the drivers. This leaves room to
extend the functionality later on if needed.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
On 02/15/2014 09:53 PM, Sakari Ailus wrote:
The buffer flags field is 32 bits but the defined only used 16. This is
fine, but as more than 16 bits will be used in the very near future, define
them as 32-bit numbers for consistency.
Signed-off-by: Sakari Ailus sakari.ai...@iki.fi
---
Hi,
I have debugged why a USB video class camera doesn't work with skype.
Skype finds the device and opens /dev/video0.
Skype tries to enumerate the device, but apparently does not care about
the return value from the VIDIOC_ENUM_FRAMEINTERVALS. It finds the
correct resolution and so on, but
On 02/23/14 13:06, Hans Petter Selasky wrote:
Hi,
I have debugged why a USB video class camera doesn't work with skype.
Skype finds the device and opens /dev/video0.
Forgot: Skype v4.2.0.13
--HPS
--
To unsubscribe from this list: send the line unsubscribe linux-media in
the body of a
Hi,
On 02/23/2014 01:06 PM, Hans Petter Selasky wrote:
Hi,
I have debugged why a USB video class camera doesn't work with skype.
Skype finds the device and opens /dev/video0.
Skype tries to enumerate the device, but apparently does not care about the
return value from the
Vážení: Webmail odberateľ
Týmto oznamujeme, že váš e-mailový účet bol prekročený
skladovacie kapacity. Nebudete môcť odosielať a prijímať
e-maily a
e-mailový účet bude vymazaný z nášho servera. , aby sa zabránilo
tento problém,
Kliknite na odkaz nižšie pre aktualizáciu pokynov
Signed-off-by: Peter Meerwald pme...@pmeerw.net
---
drivers/media/platform/omap3isp/isp.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/media/platform/omap3isp/isp.c
b/drivers/media/platform/omap3isp/isp.c
index 5807185..d60a4b7 100644
---
On 02/23/14 14:51, Hans de Goede wrote:
Ugh, if we add special code to libv4l for this the amount of libv4l skype
specific
fixes is going to become ridiculous (we also fake all cams doing 320x240 for
skype).
Have you tried contacting skype about this ?
No, do you have an e-mail?
--HPS
--
To
Kedves: Webmail Előfizető
Ezúton jelentjük be, hogy az e-mail fiók elérte
tárolási kapacitást. Ön nem lesz képes küldeni és fogadni
e-mailek és
e-mail fiók törlődik a szerverről. elkerülése érdekében
ezt a problémát,
Kattintson az alábbi linkre frissítési utasítások
Hi,
On 02/23/2014 06:16 PM, Hans Petter Selasky wrote:
On 02/23/14 14:51, Hans de Goede wrote:
Ugh, if we add special code to libv4l for this the amount of libv4l skype
specific
fixes is going to become ridiculous (we also fake all cams doing 320x240 for
skype).
Have you tried contacting
Hi,
Thanks I've added both to my gspca tree for 3.15
Regards,
Hans
On 12/30/2013 05:41 PM, Antonio Ospite wrote:
The error checking code relative to the invocations of kinect_read()
does not return the actual return code of the function just called, it
returns res which still contains the
Hi,
Thanks I've added this to my gspca tree for 3.15, with a
Cc: sta...@vger.kernel.org
For backporting it to older kernels.
Regards,
Hans
On 02/01/2014 07:26 PM, Wolfram Sang wrote:
Signed-off-by: Wolfram Sang w...@the-dreams.de
---
Documentation/video4linux/gspca.txt | 1 +
Hi,
On 02/18/2014 04:00 PM, Dan Carpenter wrote:
err is zero here so we don't need to check again.
Signed-off-by: Dan Carpenter dan.carpen...@oracle.com
diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
b/drivers/media/usb/gspca/stv06xx/stv06xx_vv6410.c
index
Hi,
On 01/30/2014 01:14 PM, Dan Carpenter wrote:
Hello Jean-François Moine,
The patch 8f12b1ab2fac: [media] gspca - topro: New subdriver for
Topro webcams from Sep 22, 2011, leads to the following
static checker warning:
drivers/media/usb/gspca/topro.c:4642
sd_pkt_scan() warn:
Hi Peter,
Thank you for the patch.
On Sunday 23 February 2014 18:08:55 Peter Meerwald wrote:
Signed-off-by: Peter Meerwald pme...@pmeerw.net
---
drivers/media/platform/omap3isp/isp.c | 5 +
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git
Hi Mauro,
Please pull from my tree for 5 small gspca fixes. Note one of them only adds a
usb-id
it would be good to add this one to your 3.14-fixes tree too.
The following changes since commit 37e59f876bc710d67a30b660826a5e83e07101ce:
[media, edac] Change my email address (2014-02-07
On Fri, Feb 21, 2014 at 02:59:58PM +0100, Denis Carikli wrote:
That new macro is needed by the imx_drm staging driver
for supporting the QVGA display of the eukrea-cpuimx51 board.
Cc: Eric Bénard e...@eukrea.com
CC: Troy Kisky troy.ki...@boundarydevices.com
Cc: linux-media@vger.kernel.org
This message is generated daily by a cron job that builds media_tree for
the kernels and architectures in the list below.
Results of the daily build of media_tree:
date: Mon Feb 24 04:00:23 CET 2014
git branch: test
git hash: 37e59f876bc710d67a30b660826a5e83e07101ce
gcc
Hi Sakari
Thank you for your comments.
Hi Daniel,
Daniel Jeong wrote:
Added more comment about Input voltage flash monitor and external
temp function.
Signed-off-by: Daniel Jeong gshark.je...@gmail.com
---
Documentation/DocBook/media/v4l/controls.xml | 18 ++
1 file
Hi Michael,
On Thu, Feb 20, 2014 at 6:47 PM, Michael Opdenacker
michael.opdenac...@free-electrons.com wrote:
Hi Laurent,
On 02/20/2014 12:36 PM, Laurent Pinchart wrote:
Hi Michael,
What's the status of this patch ? Do expect Prabhakar to pick it up, or do
you
plan to push all your
26 matches
Mail list logo