Chandru,
>> What is the difference between pullup/pulldown selection and pullup
>> enable bits in the pad configuration register of omap 3430
processor?
[Brandon] : There are 2 bits to control pullup/pulldown scenario. The
PULLTYPESELECT determines whether a pullup resistor is connected to the
p
Somz,
The parameter set looks fine and as you indicated, works fine
for the 1024 byte transfer.
Regarding the 64-byte transfer, which was not represented in the
parameters you provided, I suspect that it is getting stuck in the L1
Cache, or possibly L2 Cache, but not actually gett
Somz,
I'm not sure I quite comprehend the two transfers you mention.
Regardless, please send your System DMA parameters for the
transfer.
Did you perform a cache invalidate of the DEST buffer to ensure
you are seeing new data when performing a read by the CPU from DEST to
Arun,
J15 is the ball on the BGA package that I2C2_SCL is assigned to
on the OMAP242x.
The reason this may be important for some signals, is they may
actually have multiplexing options to come out on a number of different
balls. The I2C2_SCL only comes out on J15, so it is redunda
