--
>> drivers/mmc/host/dw_mmc.c| 12 ++--
>> drivers/mmc/host/dw_mmc.h|3 ---
>> 3 files changed, 2 insertions(+), 51 deletions(-)
>
> This patch applies fine but fails to compile on linux-next
> "next-20130408". You lost the rac
On 8 April 2013 17:49, Seungwon Jeon wrote:
> On Friday, April 05, 2013, Thomas Abraham wrote:
>> With device core now able to setup the default pin configuration,
>> the pin configuration code based on the deprecated Samsung specific
>> gpio bindings is removed.
>>
>> Signed-off-by: Thomas Abraha
With device core now able to setup the default pin configuration,
the pin configuration code based on the deprecated Samsung specific
gpio bindings is removed.
Signed-off-by: Thomas Abraham
Acked-by: Linus Walleij
Reviewed-by: Doug Anderson
Tested-by: Doug Anderson
Acked-by: Seungwon Jeon
---
Hi Rui,
On Tue, Apr 2, 2013 at 3:56 PM, Kukjin Kim wrote:
> Amit Daniel Kachhap wrote:
>>
>> This patchset adds TMU(Thermal management Unit) driver support for
>> exynos5440 platform. There are 3 instances of the TMU controllers so
>> necessary cleanup is done to handle multiple thermal zone.
>>
From: Jaemin Yoo
SMBus read and write are supported by the emulation layer of i2c
framework if the controller doesn't have SMBus features.
I2C_M_RECV_LEN flag is used to let i2c drivers know rx length is not
yet determined but will be read to the first byte in rx buffer.
s3c2410 doesn't handle
Hi Kukjin,
You seem to have missed out this series from your pull request to arm-soc tree.
On 13 March 2013 10:38, Sachin Kamat wrote:
> Keypad pins/lines are board specific and should be added to respective
> board dts files.
>
> Signed-off-by: Sachin Kamat
> ---
> arch/arm/boot/dts/exynos4
Stephen Rothwell wrote:
>
> Hi,
>
> On Mon, 8 Apr 2013 17:07:54 -0700 Alexandre Courbot
> wrote:
> >
> > On Mon, Apr 8, 2013 at 4:38 PM, Stephen Rothwell
> wrote:
> > >
> > > On Mon, 8 Apr 2013 21:36:44 +0200 Arnd Bergmann wrote:
> > >>
> > >> On Monday 08 April 2013, Stephen Warren wrote:
> >
Hi,
On Mon, 8 Apr 2013 17:07:54 -0700 Alexandre Courbot wrote:
>
> On Mon, Apr 8, 2013 at 4:38 PM, Stephen Rothwell
> wrote:
> >
> > On Mon, 8 Apr 2013 21:36:44 +0200 Arnd Bergmann wrote:
> >>
> >> On Monday 08 April 2013, Stephen Warren wrote:
> >> > >>
> >> > >> Should do the trick, if we ca
On Mon, Apr 8, 2013 at 4:38 PM, Stephen Rothwell wrote:
> Hi all,
>
> On Mon, 8 Apr 2013 21:36:44 +0200 Arnd Bergmann wrote:
>>
>> On Monday 08 April 2013, Stephen Warren wrote:
>> > >>
>> > >> Should do the trick, if we can make sure that your tree is merged
>> > >> prior to my patches.
>> > >
>
Hi all,
On Mon, 8 Apr 2013 21:36:44 +0200 Arnd Bergmann wrote:
>
> On Monday 08 April 2013, Stephen Warren wrote:
> > >>
> > >> Should do the trick, if we can make sure that your tree is merged
> > >> prior to my patches.
> > >
> > > I'm not sure but I think, arm-soc tree should be merged into m
Gday !
I ended up seeing your main image on the net. I really like you a lot.
Let's talk ! I can send you my image if you want.
Just drop me a line at private email: tereas...@domainizmail.com
With hope and love..
tereasa
--
To unsubscribe from this list: send the line "unsubscri
Am Montag, 8. April 2013, 21:53:07 schrieb Sylwester Nawrocki:
> The external pending interrupt register address (EINTPEND) offset is
> 0xa8, not 0x08. Without this patch the external interrupts are not
> properly acknowledged, which may lead to an interrupt storm and the
> system hang as soon as a
On 04/08/2013 08:20 PM, Kukjin Kim wrote:
The following changes since commit
6dbe51c251a327e012439c4772097a13df43c5b8:
Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/devel-samsung-for-
The external pending interrupt register address (EINTPEND) offset is
0xa8, not 0x08. Without this patch the external interrupts are not
properly acknowledged, which may lead to an interrupt storm and the
system hang as soon as any external interrupt is requested.
Signed-off-by: Sylwester Nawrocki
On Monday, April 08, 2013 09:02:44 PM Kukjin Kim wrote:
> amit daniel kachhap wrote:
> >
> > On Fri, Apr 5, 2013 at 6:08 PM, Rafael J. Wysocki wrote:
> > > On Thursday, March 28, 2013 01:35:18 PM Amit Daniel Kachhap wrote:
> > >> Submitting the V5 version of exynos5440 cpufreq driver. This patchs
Tomasz,
On Mon, Apr 8, 2013 at 12:27 PM, Tomasz Figa wrote:
> Common Clock Framework by default automatically gates unused clocks, just
> like regulator core does with unused regulators. Maybe this is the cause?
Yes, I'm nearly certain that's the case here. The reset code doesn't
belong to any
On Monday 08 April 2013, Stephen Warren wrote:
> >>
> >> Should do the trick, if we can make sure that your tree is merged
> >> prior to my patches.
> >
> > I'm not sure but I think, arm-soc tree should be merged into mainline
> > before others...
> >
> >> Can you put it into your tree for 3.10?
Hi Doug,
On Monday 08 of April 2013 12:21:32 Doug Anderson wrote:
> Kukjin,
>
> On Mon, Apr 8, 2013 at 11:29 AM, Kukjin Kim wrote:
> > BTW, if any problems on current for-next, please kindly let me know.
>
> I usually try to check linux-next at least once a week, but sometimes
> it's more or le
Kukjin,
On Mon, Apr 8, 2013 at 11:29 AM, Kukjin Kim wrote:
> BTW, if any problems on current for-next, please kindly let me know.
I usually try to check linux-next at least once a week, but sometimes
it's more or less often. At the moment I'm trying to track something
weird down but it seems li
On 04/08/13 14:01, Sachin Kamat wrote:
Fixes the following build error:
Error: arch/arm/boot/dts/exynos5250-smdk5250.dts:250.3-251.1 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [arch/arm/boot/dts/exynos5250-smdk5250.dtb] Error 1
make: *** [dtbs] Error 2
Signed-off-by: Sachi
On 04/09/13 03:25, Doug Anderson wrote:
Kukjin,
On Mon, Apr 8, 2013 at 11:23 AM, Kukjin Kim wrote:
Thanks for your pointing out. But it should be fixed with re-sorting out the
branch.
No problem with however you want to solve it. ;) Seemed that the
patch was the easiest way to report the p
Kukjin,
On Mon, Apr 8, 2013 at 11:23 AM, Kukjin Kim wrote:
> Thanks for your pointing out. But it should be fixed with re-sorting out the
> branch.
No problem with however you want to solve it. ;) Seemed that the
patch was the easiest way to report the problem in any case...
-Doug
--
To unsub
On 04/09/13 01:58, Doug Anderson wrote:
This change makes the rtc on the exynos5250 and 5440 disabled by
default to match exynos4.
Ever since the common clock framework came in came in, exynos5250
boards have dumped lots of warnings in the boot log. It turns out
that we don't see those on exyno
On 04/09/13 01:51, Doug Anderson wrote:
The display timing node was added:
7ed2077 ARM: dts: Add display timing node to exynos5250-smdk5250.dts
...and looks OK there. ...but it looks like we lost a "};" in the
merge and it no longer compiles. Fix it.
Signed-off-by: Doug Anderson
---
arch/
On 04/08/13 23:55, Paul Bolle wrote:
The only user of Kconfig symbol EXYNOS_DEV_DRM was removed in commit
0a9d5ac307aefbb2c772537d3fe7f75046d563ac ("ARM: EXYNOS: removing
exynos-drm device registration from non-dt platforms"). It is safe to
remove this symbol too.
Signed-off-by: Paul Bolle
---
O
The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:
Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/devel-samsung-for-v3.10
for you to fetch changes up to
The following changes since commit da821eb7d42935b0f7056d98c75fd1150f6636f4:
Merge commit 'v3.9-rc5' into next/clk-exynos (2013-04-09 01:10:13 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/secure-exynos-for-v3.10
The following changes since commit ad38bdd15d5b97dcb1ffc46ea77c237e30312fbb:
ARM: SAMSUNG: Remove unused plat-samsung/time.c (2013-03-05 20:19:54
+0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/timer-samsung-for-v3
The following changes since commit da821eb7d42935b0f7056d98c75fd1150f6636f4:
Merge commit 'v3.9-rc5' into next/clk-exynos (2013-04-09 01:10:13 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/pmu-exynos-for-v3.10
f
The following changes since commit 97916777d6904e24b86eac77da58ef7cb09d539d:
ARM: EXYNOS: skip wakeup interrupt registration for exynos5250 if
pinctrl is enabled (2013-03-05 20:59:12 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-s
The following changes since commit da821eb7d42935b0f7056d98c75fd1150f6636f4:
Merge commit 'v3.9-rc5' into next/clk-exynos (2013-04-09 01:10:13 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/dt-exynos-for-v3.10
fo
The following changes since commit 07961ac7c0ee8b546658717034fe692fd12eefa9:
Linux 3.9-rc5 (2013-03-31 15:12:43 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/clk-exynos-for-v3.10
for you to fetch changes up to da
The following changes since commit 6dbe51c251a327e012439c4772097a13df43c5b8:
Linux 3.9-rc1 (2013-03-03 15:11:05 -0800)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/mct-exynos-for-v3.10
for you to fetch changes up to 35
The following changes since commit d98fedef912832611b668fa7ece8e8ff54a6a590:
gpio: samsung: fixes build warning with s3c2410_defconfig (2013-03-05
20:21:36 +0900)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/irq-s3c24x
The following changes since commit a937538b868b8369b98967929045f1df54234323:
Linux 3.9-rc3 (2013-03-17 15:59:32 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
tags/cleanup-samsung-for-v3.10
for you to fetch changes up
Hi Arnd, Olof
This is 2nd pull-request for Samsung stuff for v3.10.
If any problems, please kindly let me know.
--
Thanks.
Best regards,
Kgene.
--
Kukjin Kim , Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
The following changes since commit 347394370cbd68ab44
Adding PPC and Microblaze maintainers.
On 04/08/2013 09:33 AM, Andrew Murray wrote:
> This patch factors out common implementation patterns to reduce overall kernel
> code and provide a means for host bridge drivers to directly obtain struct
> resources from the DT's ranges property without relyin
This change makes the rtc on the exynos5250 and 5440 disabled by
default to match exynos4.
Ever since the common clock framework came in came in, exynos5250
boards have dumped lots of warnings in the boot log. It turns out
that we don't see those on exynos4 since the rtc is disabled by
default.
On Mon, Apr 08, 2013 at 06:08:53PM +0900, Jingoo Han wrote:
> I have a question. Now, I am reviewing the Tegra PCIe, Marvell PCIe
> patchset. However, in the case of Exynos PCIe, 'downstream I/O' and
> 'non-prefetchable memory' are different between PCIe0 and PCIe1.
> These regions are not share
On Saturday 06 of April 2013 00:24:18 Tomasz Figa wrote:
> On Friday 05 of April 2013 21:54:21 Arnd Bergmann wrote:
> > On Friday 05 April 2013, Tomasz Figa wrote:
> > > > I don't think anyone ever suggested using a private API though.
> > >
> > > I must have gotten the last paragraph of
> > > htt
The display timing node was added:
7ed2077 ARM: dts: Add display timing node to exynos5250-smdk5250.dts
...and looks OK there. ...but it looks like we lost a "};" in the
merge and it no longer compiles. Fix it.
Signed-off-by: Doug Anderson
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 1 +
On 04/08/2013 01:31 AM, Kukjin Kim wrote:
> Alexandre Courbot wrote:
>>
>> On Wed, Apr 3, 2013 at 5:35 PM, Kukjin Kim wrote:
could you amend the patches that adds them such as they get changed
into "select ARCH_REQUIRE_GPIOLIB" instead? You can grep for "select
>>>
>>> I can do it for my
branch.
>
> drivers/mmc/host/dw_mmc-exynos.c | 38
> --
> drivers/mmc/host/dw_mmc.c| 12 ++--
> drivers/mmc/host/dw_mmc.h|3 ---
> 3 files changed, 2 insertions(+), 51 deletions(-)
This patch applies fine but fails to compile
On 04/08/2013 01:00 PM, Russell King - ARM Linux wrote:
> On Mon, Apr 08, 2013 at 12:27:34PM +0200, Sylwester Nawrocki wrote:
>> On 04/08/2013 11:57 AM, Kukjin Kim wrote:
[...]
>
> Sigh. This stuff looks rather screwed up now:
>
> $ grep -B1 'ENTRY.*do_suspend' arch/arm/mm/proc*.S
> arch/arm/mm/
The only user of Kconfig symbol EXYNOS_DEV_DRM was removed in commit
0a9d5ac307aefbb2c772537d3fe7f75046d563ac ("ARM: EXYNOS: removing
exynos-drm device registration from non-dt platforms"). It is safe to
remove this symbol too.
Signed-off-by: Paul Bolle
---
Only "git grep" tested.
arch/arm/mach
This patch factors out common implementation patterns to reduce overall kernel
code and provide a means for host bridge drivers to directly obtain struct
resources from the DT's ranges property without relying on architecture specific
DT handling. This will make it easier to write archiecture indep
Hi,
On 04/06/2013 12:13 PM, Padma Venkat wrote:
> On Fri, Apr 5, 2013 at 7:23 PM, Sylwester Nawrocki
> wrote:
>> On 04/05/2013 08:23 AM, Padmavathi Venna wrote:
>>> Audio subsystem is introduced in exynos platforms. This has seperate
>>> clock controller which can control i2s0 and pcm0 clocks. Th
Amit Daniel Kachhap wrote:
>
> This patch adds device node for TMU controller. There are 3
> instances of the controllers so 3 nodes are created.
>
> Signed-off-by: Amit Daniel Kachhap
> ---
> arch/arm/boot/dts/exynos5440.dtsi | 43
> +
> 1 files changed, 4
On Friday, April 05, 2013, Thomas Abraham wrote:
> With device core now able to setup the default pin configuration,
> the pin configuration code based on the deprecated Samsung specific
> gpio bindings is removed.
>
> Signed-off-by: Thomas Abraham
Acked-by: Seungwon Jeon
I hope that your anoth
amit daniel kachhap wrote:
>
> On Fri, Apr 5, 2013 at 6:08 PM, Rafael J. Wysocki wrote:
> > On Thursday, March 28, 2013 01:35:18 PM Amit Daniel Kachhap wrote:
> >> Submitting the V5 version of exynos5440 cpufreq driver. This patchset
> addresses
> >> all the coding and design concerns raised espe
On 8 April 2013 16:37, Vikas Sajjan wrote:
> While migrating to common clock framework (CCF), I found that the FIMD clocks
> were pulled down by the CCF.
> If CCF finds any clock(s) which has NOT been claimed by any of the
> drivers, then such clock(s) are PULLed low by CCF.
>
> Calling clk_prepar
While migrating to common clock framework (CCF), I found that the FIMD clocks
were pulled down by the CCF.
If CCF finds any clock(s) which has NOT been claimed by any of the
drivers, then such clock(s) are PULLed low by CCF.
Calling clk_prepare() for FIMD clocks fixes the issue.
This patch also r
On Mon, Apr 08, 2013 at 12:27:34PM +0200, Sylwester Nawrocki wrote:
> On 04/08/2013 11:57 AM, Kukjin Kim wrote:
> Yes, this looks better. However after posting this patch I noticed linker
> errors in some builds due to undefined cpu_arm920_do_suspend,
> cpu_arm920_do_resume routines.
>
> It seems
Hi,
On 04/06/2013 12:16 PM, Padma Venkat wrote:
> On Fri, Apr 5, 2013 at 6:24 PM, Sylwester Nawrocki
> wrote:
>>
>> From a brief look Exynos4 and Exynos5 Audio Subsystem CLKCON very similar.
>> I've just found bit 2 of 0x0381_0008 register is not used on Exynos5250.
>
> I added bit 2 as i2s_bus
Rafael J. Wysocki wrote:
[...]
> > >
> > > Well, I'm dropping it. Please merge via the Samsung tree.
> > >
> > OK, I will.
> >
> > I got patch file from Viresh, and there is a sign from Rafael,
> > but it should be ack. So Rafael, let me use your ack on this patch when
> > I apply. If any proble
On Monday, April 08, 2013 06:15:09 PM Kukjin Kim wrote:
> Rafael J. Wysocki wrote:
> >
> > On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
> > > On 5 April 2013 12:18, Kukjin Kim wrote:
> > > > Basically, this moving looks good to me, but should be re-worked based
> > on
> > > > for-nex
On 04/08/2013 11:57 AM, Kukjin Kim wrote:
> Sylwester Nawrocki wrote:
[...]
> Yes, right. The pm.c in plat-samsung should be built with
> arch/arm/kernel/sleep.S and suspend.c.
>
> BTW it should be shown in alphabetical order and we don't need more
> following in mach-exynos.
>
> 8<--
Sylwester Nawrocki wrote:
>
> There is currently no users of these definitions so remove them.
>
> Signed-off-by: Sylwester Nawrocki
> ---
> arch/arm/mach-s3c24xx/regs-dsc.h | 203 +
> -
> 1 files changed, 4 insertions(+), 199 deletions(-)
>
Thanks for your
On 8 April 2013 13:47, Amit Daniel Kachhap wrote:
> Submitting the V6 version of exynos5440 cpufreq driver. This patchset
> addresses
> all the coding and design concerns raised especially by Viresh.
>
> Changes in V6:
> * Used cpufreq post-change notifier call back in case of failure as pointed
On Mon, Apr 8, 2013 at 2:46 PM, Viresh Kumar wrote:
> On 8 April 2013 14:17, Viresh Kumar wrote:
>> On 8 April 2013 13:47, Amit Daniel Kachhap wrote:
>>
>>> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
>>> index f3f3b14..bce2195 100644
>>> --- a/drivers/cpufreq/Kconfig.
This patch adds dvfs support for exynos5440 SOC. This soc has 4 cores and
they scale at same frequency. The nature of exynos5440 clock controller is
different from previous exynos controllers so not using the common exynos
cpufreq framework. The major difference being interrupt notification for
fre
Sylwester Nawrocki wrote:
>
> The power management code of S3C24XX, S3C64XX, S5PV210 platform in
> arch/arm/plat-samsung/, arch/arm/mach-s3c24xx/, arch/arm/mach-s3c64xx/
> directories uses generic cpu_suspend routine. Make sure it is compiled
> in when building with power management support. Witho
Heiko Stübner wrote:
>
> Am Sonntag, 7. April 2013, 22:22:50 schrieb Sylwester Nawrocki:
> > Due to NR_IRQS being incorrectly defined not all IRQ domains can
> > be registered for S3C2440. It causes following errors on a s3c2440
> > SoC based board:
> >
> > NR_IRQS:89
> > S3C2440: IRQ Support
> >
On 8 April 2013 14:45, Kukjin Kim wrote:
> Rafael J. Wysocki wrote:
>> Well, I'm dropping it. Please merge via the Samsung tree.
>>
> OK, I will.
>
> I got patch file from Viresh, and there is a sign from Rafael, but it should
> be ack. So Rafael, let me use your ack on this patch when I apply.
On 8 April 2013 14:17, Viresh Kumar wrote:
> On 8 April 2013 13:47, Amit Daniel Kachhap wrote:
>
>> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
>> index f3f3b14..bce2195 100644
>> --- a/drivers/cpufreq/Kconfig.arm
>> +++ b/drivers/cpufreq/Kconfig.arm
>> @@ -42,6 +42,15
Rafael J. Wysocki wrote:
>
> On Friday, April 05, 2013 12:36:34 PM Viresh Kumar wrote:
> > On 5 April 2013 12:18, Kukjin Kim wrote:
> > > Basically, this moving looks good to me, but should be re-worked based
> on
> > > for-next of samsung tree because this touches too many samsung stuff
> so thi
On Saturday, March 23, 2013 1:09 PM, Jingoo Han wrote:
>
> Exynos5440 has two PCIe controllers which can be used as root complex
> for PCIe interface.
>
> Signed-off-by: Jingoo Han
> ---
> arch/arm/boot/dts/exynos5440-ssdk5440.dts |8 +++
> arch/arm/boot/dts/exynos5440.dtsi |
On 8 April 2013 13:47, Amit Daniel Kachhap wrote:
> diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
> index f3f3b14..bce2195 100644
> --- a/drivers/cpufreq/Kconfig.arm
> +++ b/drivers/cpufreq/Kconfig.arm
> @@ -42,6 +42,15 @@ config ARM_EXYNOS5250_CPUFREQ
> This ad
On Fri, Apr 5, 2013 at 6:08 PM, Rafael J. Wysocki wrote:
> On Thursday, March 28, 2013 01:35:18 PM Amit Daniel Kachhap wrote:
>> Submitting the V5 version of exynos5440 cpufreq driver. This patchset
>> addresses
>> all the coding and design concerns raised especially by Viresh.
>>
>> Changes in V
On Thu, Mar 28, 2013 at 6:12 PM, Viresh Kumar wrote:
>
> On 28 March 2013 13:35, Amit Daniel Kachhap wrote:
> > +++ b/drivers/cpufreq/exynos5440-cpufreq.c
> > +static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > +{
> > + policy->cur = dvfs_info->cur_frequency;
> > +
The OPP library support is needed for exynos5440 cpu frequency
dynamic scaling driver.
Cc: Viresh Kumar
Cc: Rafael J. Wysocki
Cc: Kukjin Kim
Signed-off-by: Amit Daniel Kachhap
---
arch/arm/mach-exynos/Kconfig |2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/arch/arm/m
Submitting the V6 version of exynos5440 cpufreq driver. This patchset addresses
all the coding and design concerns raised especially by Viresh.
Changes in V6:
* Used cpufreq post-change notifier call back in case of failure as pointed by
Viresh.
* Called cpufreq_frequency_table_cpuinfo before ca
This patch helps to have single binary for exynos5440 and previous
exynos soc's. This change is needed for adding exynos5440 cpufreq driver
which does not uses exynos-cpufreq common file and adds it own driver.
Cc: Viresh Kumar
Cc: Rafael J. Wysocki
Cc: Kukjin Kim
Signed-off-by: Amit Daniel Kac
Add cpufreq controller device node for Exynos5440 SoC for passing
parameters like controller base address, interrupt and cpufreq
table. This node is added outside cpu0 as this driver is now a platform
driver and a new device structure is needed.
Cc: Viresh Kumar
Cc: Rafael J. Wysocki
Cc: Kukjin
This patch adds dvfs support for exynos5440 SOC. This soc has 4 cores and
they scale at same frequency. The nature of exynos5440 clock controller is
different from previous exynos controllers so not using the common exynos
cpufreq framework. The major difference being interrupt notification for
fre
Alexandre Courbot wrote:
>
> On Wed, Apr 3, 2013 at 5:35 PM, Kukjin Kim wrote:
> >> could you amend the patches that adds them such as they get changed
> >> into "select ARCH_REQUIRE_GPIOLIB" instead? You can grep for "select
> >
> > I can do it for my tree but the branch already included in arm-
From: Thomas Abraham
The Exynos5440 common clock driver has changed the clock ID's for
some of the clocks. Fix the gmac clock entries in Exynos5440 dtsi
file accordingly.
Signed-off-by: Thomas Abraham
Signed-off-by: Kukjin Kim
---
arch/arm/boot/dts/exynos5440.dtsi |2 +-
1 file changed, 1
This patch adds SD5v1.dts file for supporting SD5v1(Exynos5440) board.
Signed-off-by: Kukjin Kim
---
arch/arm/boot/dts/Makefile |1 +
arch/arm/boot/dts/exynos5440-sd5v1.dts | 39
2 files changed, 40 insertions(+)
create mode 100644 arch/arm/bo
Sylwester Nawrocki wrote:
>
> Hi Shaik,
>
> On 03/15/2013 10:00 AM, Shaik Ameer Basha wrote:
> > On Thu, Mar 7, 2013 at 9:05 PM, Sylwester Nawrocki
> > wrote:
> ...
> >> May I ask what do you need this for ? This code won't be used for
> >> Exynos4 and Exynos5 SoCs starting from 3.10. And it is
Vikas Sajjan wrote:
>
> This patch series adds support for DRM FIMD DT for Exynos4 DT Machines,
> specifically for Exynos4412 SoC.
>
> changes since v10:
> - addressed comments from Sylwester Nawrocki
>
>
> changes since v9:
> - dropped the patch "ARM: dts: Add lcd pinctrl node entr
Mike Turquette wrote:
>
> Quoting Tushar Behera (2013-04-02 01:20:40)
> > In legacy setup, sclk_mmc{0,1,2,3} used PRE_RATIO bit-field (8-bit wide)
> > instead of RATIO bit-field (4-bit wide) for dividing clock rate.
> >
> > With current common clock setup, we are using RATIO bit-field which
> > is
Mike Turquette wrote:
>
> Quoting Sylwester Nawrocki (2013-04-05 10:49:45)
> > This patch adds clock indexes for ACLK_DIV0, ACLK_DIV1,
> > ACLK_400_MCUISP, ACLK_MCUISP_DIV0, ACLK_MCUISP_DIV1,
> > DIVACLK_400_MCUISP and DIVACLK_200 so these clocks are
> > available to the consumers (Exynos4x12 FIMC
Sachin Kamat wrote:
>
> On 11 March 2013 12:24, Kukjin Kim wrote:
> > Sachin Kamat wrote:
> >>
> >> Hi Kukjin,
> >>
> >> Can you please look into this series as it is pending since quite some
> time.
> >>
> > Applied, I have another opinion about the compatible string though...
>
> Couldn't find
83 matches
Mail list logo
