Dear All,
I am successfully using LL-Temac driver on Virtex-4 cheap under linux 2.6.*.
All works fine with one Network interface. Does anybody know how to
configure the systems to deal with two network interfaces?
I will be grateful for any hint.
M.
--
View this message in context:
http://old
I have a ppc405 based board with one serial interface which I use as a
console.
I would like to redirect or suppress, at run time, the console in order to
use the
serial port to control external serial devices.
I have tried (busybox) setconsole program to redirect the console to
/dev/null
but it
I have done some experiments with u-boot (version 1.2.0) and with linux
kernel (version 2.6.23) and it seems to be that the limitation of 8MB is not
anymore the problem. I have built u-boot and linux for ppc405 (virtex-4). I
have set the CFG_BOOTMAPSZ to 16 MB:
#define CFG_BOOTMAPSZ (8
Thank you for your answer. When studying the u-boot source code I have found
that
it is indeed register r6 and r7 which pass the location of the command line
parameters and the
size.
The location of the parameters could be changed in u-boot according to the
macro:
CFG_BOOTMAPSZ
There is howeve
Dear All,
I use linux kernel 2.6.23 and u-boot 1.2.0 (on ppc405 virtex-4 ) for some
time. All works fine when the
kernel together with initramfs is smaller than 8MB. If it is bigger than the
kernel does not boot properly.
First of all I would like to know how the address for the linux command l
lzma patch.
Thanks
M.
Mirek23 wrote:
>
> Dear All,
>
> I am looking for a patch which introduces lzma compression or suppresses
> the standard gzip compression for the initramfs.
>
> I would be grateful for any hint.
>
> M.
>
--
View this message in context:
h
Dear All,
I am looking for a patch which introduces lzma compression or suppresses the
standard gzip compression for the initramfs.
I would be grateful for any hint.
M.
--
View this message in context:
http://www.nabble.com/initramfs-with-lzma-compression-tp23446869p23446869.html
Sent from th
