+ MM mailing list
On Sun, Mar 6, 2016 at 11:04 PM, Aleksander Morgado
wrote:
>>> > Good point, ppp is not enabled! Option seems to be --enable-ppp.
>>> > I'll try
>>> > >
>>> > > it. This NDISDUP seemp pretty problematic. In fact I found MM
>>> > > patch whose
>>> > > introduction comment describ
On Fri, Mar 4, 2016 at 5:54 PM, Dan Williams wrote:
>> > Good point, ppp is not enabled! Option seems to be --enable-ppp.
>> > I'll try
>> > >
>> > > it. This NDISDUP seemp pretty problematic. In fact I found MM
>> > > patch whose
>> > > introduction comment describes pretty much how this modem wo
On Fri, 2016-03-04 at 17:17 +0200, matti kaasinen wrote:
> 2016-03-04 13:50 GMT+02:00 matti kaasinen :
>
> >
> > Good point, ppp is not enabled! Option seems to be --enable-ppp.
> > I'll try
> > >
> > > it. This NDISDUP seemp pretty problematic. In fact I found MM
> > > patch whose
> > > introdu
2016-03-04 13:50 GMT+02:00 matti kaasinen :
> Good point, ppp is not enabled! Option seems to be --enable-ppp. I'll try
>> it. This NDISDUP seemp pretty problematic. In fact I found MM patch whose
>> introduction comment describes pretty much how this modem works (
>> https://cgit.freedesktop.org/
2016-03-04 12:18 GMT+02:00 matti kaasinen :
> It's NM the one creating the interface. Did you compile NM in yocto
>> with ppp support? (--with-ppp I think it is) What's the configure
>> report output? This would be when you want to force the legacy PPP
>> method, though. I still believe you should
2016-03-04 12:18 GMT+02:00 matti kaasinen :
> No problem at all, this was just told in the MM recipe commenting systemd
> confuguration variable that was set to inhibit starting service at boot
> (below).
> # no need to start on boot - dbus will start on demand
> SYSTEMD_AUTO_ENABLE = "disable"
>
Aleksander,
thank your very much for your fine answers. Please find my replies/comments
below.
2016-03-04 1:28 GMT+02:00 Aleksander Morgado :
>
> Did connman/ofono run a DHCP client on the interface?
>
No, I tried to run it manually with following procedure:
ifconfig wwan0 up
dhclient wwan0
DHCP
On Fri, Mar 4, 2016 at 12:28 AM, Aleksander Morgado
wrote:
>
>> QUESTIONS:
>> =
>> 1) What is missing in my set-up?
>
> I think you're missing
...
I think you're basically missing the NM "gsm" connection that you
should activate through NM (e.g. with nmcli), and I'd also try to use
that
Hey,
>
> Background:
> =
> I'm trying to integrate Huawei 3131 modem, VID=21d1. Original PID=14fe that
> switches to PID=1506.
>
> I'm working on am335x based embedded board running yocto/linux-ti-staging
> based Linux with 4.1 kernel. NM version is 0.9.8.10 and MM version 1.4.2.
> Board i
Hi,
For the firstly, sorry about long story..
Background:
=
I'm trying to integrate Huawei 3131 modem, VID=21d1. Original PID=14fe that
switches to PID=1506.
I'm working on am335x based embedded board running yocto/linux-ti-staging
based Linux with 4.1 kernel. NM version is 0.9.8.10 and
10 matches
Mail list logo