PS: I'm not so happy with this long uci option name,
'resolvconfuntouched', but couldn't come up with anything better
yet. Something like 'upstreaminsteadoflocaldnsserver' would be
more descriptive but, well, even longer...
Suggestions (and feedback for this patch in general) welcome :).
__
Currently, dnsmasq removes /tmp/resolv.conf (which is usually a symlink
to /tmp/resolv.conf.auto) and creates its own resolv.conf with at least
a nameserver pointing to 127.0.0.1.
However, in some cases it might not be desired that the router itself
queries its own dnsmasq dns-server but should qu
With this commit the --address option of dnsmasq, directly returning ip
addresses for certain domains instead of querying the dns server, can be
configured in the dhcp uci configuration file. See the dnsmasq manpage
for further details of this option.
Signed-off-by: Linus Lüssing
---
package/dns
If your ISP is pushing their own DSL equipment (which many do to contain
support costs), they won't be
forthcoming with your various settings: encapsulation, VPI/VCI, etc.
These you might have to discover yourself. The easiest way to do this is with
atmdiag and atmdump.
Signed-off-by: Philip P
If your ISP is pushing their own DSL equipment (which many do to contain
support costs), they won't be
forthcoming with your various settings: encapsulation, VPI/VCI, etc.
These you might have to discover yourself. The easiest way to do this is with
atmdiag and atmdump, but
these aren't built b
CONFIG_COPS needs to be defined.
Signed-off-by: Philip Prindeville
Index: target/linux/generic/config-2.6.32
===
--- target/linux/generic/config-2.6.32 (revision 26531)
+++ target/linux/generic/config-2.6.32 (working copy)
@@ -1198
Since the PHY driver is only used for the WAN port and there is virtually
no difference between it and the generic PHY driver, we can sefely remove
it.
Signed-off-by: Jonas Gorski
---
This has been tested on a WNDR3700 v1 and it didn't show any obvious
problems; the WAN port was working fine. So
On Fri, 8 Apr 2011 15:26:08 +0800, HP Teoh wrote:
> On Fri, Apr 8, 2011 at 10:55 AM, Layne Edwards wrote:
>
>> This patch enables the hub Transaction Translators (TT) in the dwc_otg
>> driver, thus enabling the driver to handle all speeds (both USB 2.0 and USB
>> 1.1). This fixes the "usb
Yes, I am using the backfire version and will report my finding once I do
it.
On Fri, Apr 8, 2011 at 11:00 PM, Jonas Gorski <
jonas.gorski+open...@gmail.com> wrote:
> On 6 April 2011 16:18, Yeoh Chun Yeow wrote:
> > Hi, Jonas,
> > UBNT RS has two ports connected to eth1, port 0 and port 1. If yo
Okay, disregard this patch. Equate on IRC was kind enough to test for
me that at least the WNDR3700 is fine with having no Realtek PHY
driver. I'll send a new one removing it.
Jonas
___
openwrt-devel mailing list
openwrt-devel@lists.openwrt.org
https://l
On 6 April 2011 16:18, Yeoh Chun Yeow wrote:
> Hi, Jonas,
> UBNT RS has two ports connected to eth1, port 0 and port 1. If you connect
> your Ethernet cable to port 0 without first connecting Ethernet cable to
> port 1, it won't work. You will see a lot of messages "Trying 100/FULL,
> Trying 10/HA
On 7 April 2011 12:04, Peter Lebbing wrote:
> Any chance that you can get a datasheet for the FC chip? It would help
> implementing FC functionality a lot.
I can ask them, but I doubt it. For what they care, I am not much more
than a random guy on the internet ;-)
Also since I don't have access
Add an initscript to the rsync package for use as a daemon, and a sample
rsyncd.conf to show a simple setup.
Signed-off-by: Ian Leonard
---
Index: feeds/packages/net/rsync/files/rsyncd.init
===
--- feeds/packages/net/rsync/files/rsy
Version bump hd-idle to 1.03. 1.02 and 1.03 were bugfix releases.
Signed-off-by: Ian Leonard
---
Index: feeds/packages/utils/hd-idle/Makefile
===
--- feeds/packages/utils/hd-idle/Makefile (revision 26531)
+++ feeds/packages/uti
On Fri, Apr 8, 2011 at 10:55 AM, Layne Edwards wrote:
> This patch enables the hub Transaction Translators (TT) in the dwc_otg
> driver, thus enabling the driver to handle all speeds (both USB 2.0 and USB
> 1.1). This fixes the "usb 1-1: parent hub has no TT" error.
>
> This is a re-post of the e
15 matches
Mail list logo