Thank you. Don't hesitate to contact me if you have any questions or need
more specific guidance.
René
On Wed, Oct 26, 2016 at 5:04 PM, Bob Lovejoy wrote:
> Thanks René,
>
> Very much appreciated... I knew that at least 50's would be needed but I
> was unsure of clearance through the brakes. I
Thanks René,
Very much appreciated... I knew that at least 50's would be needed but I
was unsure of clearance through the brakes. I think the plan at the moment
will be to go with the r559's I have (with 700x50 fenders) but change to at
least a front center pull once I get settled. I am in th
For those tires you'll need 50mm metal fenders, either steel Berthouds,
aluminum Honjos or any other brand. They will fit with the Tektro brakes,
but when opening the brake to remove the wheel, the brake will push down on
the fender. You might also lose a bit of clearance with those. Switching to
a
All,
Sincere apologies for this question, as I think I must have missed it in
previous threads...
What metal fenders (Tanaka, Berthoud, Honjo, VO, ???) can be used for the
most possible clearance using the r559 brakes, front and rear, on a 60cm
Cheviot? I am planning on using 700x40 Schwal
I agree. A Cheviot without fenders (metal in my case) is like a...
something's missing!
On Wed, Oct 26, 2016 at 7:16 AM, Jon Dukeman,central Colorado <
row.n.2nowh...@gmail.com> wrote:
>
>
> On Wednesday, October 26, 2016 at 7:23:02 AM UTC-6, Patrick Moore wrote:
>>
>> Nice fender line. And what?
On Wednesday, October 26, 2016 at 7:23:02 AM UTC-6, Patrick Moore wrote:
>
> Nice fender line. And what? No front load?
>
> I have front and rear racks with a basket on the front of my Sam.
>
I'm just going to keep the Cheviot to a minimum with acessories and just a
Nitto Long Boy rack on the b
Kudos on the fender nut. Only way to go, unless your brake bridge is drilled
for a fender.
--
You received this message because you are subscribed to the Google Groups "RBW
Owners Bunch" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to rbw-owners-bunch+
Nice fender line. And what? No front load?
On Wed, Oct 26, 2016 at 7:17 AM, Jon Dukeman,central Colorado <
row.n.2nowh...@gmail.com> wrote:
> Thanks to Clayton and others here for their fender installation set up
> suggestions.
> I changed out the 559 front side pull and installed a Dia Comp 750