Another good one, Kevin.
Chuck
WB2EDV
- Original Message -
From: Kevin OConnell [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, September 25, 2004 4:21 PM
Subject: Re: [Repeater-Builder] Stainless hardware
Another outfit for just about anything stainless is
- Original Message -
From: n1iic Jason Greene [EMAIL PROTECTED]
Greetings, everyone.
I am looking for a source for stainless hardware including up to 2 1/2
u-bolts, nylock nuts, washers, etc. I have searched and can't find the right
vendor.
In a word...
HI gang, Does anyone have one or two 929 Mhz cans that could be
converted to notch filter use? Please contact me off board.
73
Coy
Yahoo! Groups Links
* To visit your group on the web, go to:
http://groups.yahoo.com/group/Repeater-Builder/
* To unsubscribe from this group, send an
hi ,thanks for reading ,
i am operating a Vhf Base repeater here,an Ge MAster 2.
is there a controle card that enable a Roger Beep ?or an special sound at
the end of the tx tail.
i would like to add a rober beep locally to identify it for a blind person
that
is workig with sound to recognise his
Just finished reading your info on my ? for my 100 ft tower project. Thanks
everybody!
- Original Message -
From: Mike WA6ILQ [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Saturday, September 25, 2004 10:01 AM
Subject: RE: Grounding of towers and antennas ... Re:
I have the opprutunity to help a group with a UHF MSF-5000 project.
I have not yet seen the station, but if it turns out to be a digital capable
station that can be programmed via RSS, is there any slight of hand
necessary to get down into the 440 ham band? I have the necessary
cables and RSS to
hi
i have a pair of Sinclair C3024 Multicoupler here
i wonder what is there value on the market
and i dont want to go on ebay with them ,
anyone have an idea?
they were working on 414 and 419 MHZ
Thanks for the informations,
Gervais,ve2ckn
Yahoo! Groups Links
* To visit your group on
Oh by the way does anybody out there have use for a 19 inch rack mount power
supply kepco ate25-40m fully programmable and remote.I am looking to sell it
to buy a repeater .It is brand new in the original box unopened.
- Original Message -
From: sheryl titus [EMAIL PROTECTED]
To:
Hi Kevin,
Noting that you have the software and cables, you must have some
experience with the MSF.
Providing that it is a range #2 UHF (435mhz to 475mhz), they tune
down to the ham band quite nicely. A service manual is a must,
especially if it is internally duplexed. Those models are very
I am in need of several RLC-4 controllers. Does anybody have some that
they want to sell.
Oregon
Repeater Linking Group
Mike Mullarkey
[EMAIL PROTECTED]
www.orlg.org
Yahoo! Groups Links
To visit your group on the web, go
10 matches
Mail list logo