dope thinners.
Good luck
Kurt
From: Craig Allen [mailto:[EMAIL PROTECTED]
Sent: Monday, August 18, 2008 10:50 AM
To: soaring@airage.com
Subject: [RCSE] Removing old covering, more info
It's hard to tell what type of covering it is... It's over 40 years old
so it ca
What worked for me was a combination of sanding/buffing discs on a Dremel
tool. Friction did cause some monokote color to meld into the surface of the
wood, but I was using opaque for the refinish, so it didn't matter in my case.
Instead of caustic chems, I have a theory: consider a hea
Bill Swingle wrote:
Hold on there!
Carcinogenic, mutanogenic, poisonous!
So, should I be worrying about the times (as a kid) that I used acetone
as a hand cleaner to remove things like grease and fiberglass resin?
Concerned modelers want to know. Well this one at least.
Sheiiish, here we go
put on the Superfund list if they ever tested
it :-)))
- Original Message
From: Bill Swingle <[EMAIL PROTECTED]>
To: Bill Johns <[EMAIL PROTECTED]>; [EMAIL PROTECTED]
Cc: Craig Allen <[EMAIL PROTECTED]>; soaring@airage.com
Sent: Monday, August 18, 2008 3:41:23 PM
Subj
Hold on there!
Carcinogenic, mutanogenic, poisonous!
So, should I be worrying about the times (as a kid) that I used acetone as a
hand cleaner to remove things like grease and fiberglass resin? Concerned
modelers want to know. Well this one at least.
Bill Swingle
Janesville, CA
RCSE-List f
[EMAIL PROTECTED] wrote:
Craig,
If it is dope based, then acetone will work fine. However, any color in
the dope will probably remain in the wood or seep into the wood. I
might try nail polish remover, as it has some MEK, which like acetone,
works but is less volatile and may contain some nitr
At 09:49 AM 8/18/2008, you wrote:
It's hard to tell what type of covering it is... It's over 40 years
old so it can't be any type of iron on, Its not silk, but does apear to be
dope based
Craig
Skyloft was a popular covering material from the late 60s. Skyloft
was a nylon mat material
flighter from 40 years ago!
Chris
> Original Message
> Subject: [RCSE] Removing old covering, more info
> From: Craig Allen <[EMAIL PROTECTED]>
> Date: Mon, August 18, 2008 7:49 am
> To: "soaring@airage.com"
> It's hard to tell what type
It's hard to tell what type of covering it is... It's over 40 years old so it
can't be any type of iron on, Its not silk, but does apear to be
dope based
Craig
9 matches
Mail list logo