Hello
I think you didn't get my last reply...here is a copy:
based on your help and this example
http://wiki.squid-cache.org/ConfigExamples/SmpCarpCluster ,The following is
my config and access.log.
the problem is the websites does not load resulting in timeout...
it works perfectly when commentin
On 28/08/2013 2:19 p.m., Alfredo Rezinovsky wrote:
El 27/08/13 22:43, Alfredo Rezinovsky escribió:
I have a high load servers and need to use workers or else one CPU
core climbs to 100% usage and I see a slow down in the network.
There's a way to choose a worker for a single specific request?
On 28/08/2013 9:31 a.m., HillTopsGM wrote:
Amos Jeffries-2 wrote
You do need to run "squid -z" to build the cache structure of the other
cache_dir locations. And might as well including the moved one in that
as well to verify the directory structure is correct before trying to
run normally with
On 28/08/2013 3:37 a.m., Attila Gömbös wrote:
Hi!
I have a complicated setup, where i need to accept the authorization
of the downstream proxy. It is being sent with basic authorization.
I use basic_fake_auth to accept it in any case.
That works fine, but the problem is that the downstream prox
On 28/08/2013 1:41 a.m., Michael Graham wrote:
Hi all,
It's been a while since anyone asked this on the list so I thought I'd
ask again.
What it the recommended steps if a site's is completely broken? For
example ondemand5.com fails as SERVFAIL after 2-4 secs.
Disabling ipv6 in proc isn't
On 28/08/2013 12:45 a.m., Grooz, Marc (regio iT) wrote:
Hi,
Does anybody know what the remote= in this Squid Log entry means?
Accepting HTTP Socket connections at local=127.0.0.1:3128 remote=[::] FD 8
flags=9
It is the wildcard IP address. It is equivalent the "*" on netstat
listings for L
El 27/08/13 22:43, Alfredo Rezinovsky escribió:
I have a high load servers and need to use workers or else one CPU
core climbs to 100% usage and I see a slow down in the network.
There's a way to choose a worker for a single specific request?
I have a script and I need to make a request knowing
I have a high load servers and need to use workers or else one CPU core
climbs to 100% usage and I see a slow down in the network.
There's a way to choose a worker for a single specific request?
I have a script and I need to make a request knowing wich worker will
answer it.
I've seen both th
On 08/24/2013 12:58 AM, x-man wrote:
> Hi Guys,
>
> actually all the problem appeared to be happening due to ICP communication
> between squid and our cache peer which also supports ICP. When we have
> workers (more than 1) the ICP packets were not returning back (eventually)
> to the proper worke
Amos Jeffries-2 wrote
> You do need to run "squid -z" to build the cache structure of the other
> cache_dir locations. And might as well including the moved one in that
> as well to verify the directory structure is correct before trying to
> run normally with it.
>
> Everything is automatic ex
On Aug 27, 2013, at 10:15 AM, Golden Shadow wrote:
> Hi Guy,
>
> Thanks for your reply.
>
> The guys who monitor the server say that the problem happened several times
> today but I can see in /var/log/messages just few log entries about squid
> coredumps, which were deleted for being corrupt
Hi!
I have a complicated setup, where i need to accept the authorization
of the downstream proxy. It is being sent with basic authorization.
I use basic_fake_auth to accept it in any case.
That works fine, but the problem is that the downstream proxy sends
only "Proxy-Authorization Basic username
Hi Guy,
Thanks for your reply.
The guys who monitor the server say that the problem happened several times
today but I can see in /var/log/messages just few log entries about squid
coredumps, which were deleted for being corrupted! Today, I had one chance to
inspect the problem when it happene
Hi all,
It's been a while since anyone asked this on the list so I thought I'd
ask again.
What it the recommended steps if a site's is completely broken? For
example ondemand5.com fails as SERVFAIL after 2-4 secs.
Disabling ipv6 in proc isn't enough to stop squid doing the lookup
and i
On Aug 27, 2013, at 6:11 AM, Golden Shadow wrote:
> Hello Squid Users!
>
> I have a TPROXY server built with squid V. 3.3.7, which was compiled from
> source. The server has 192 GB of RAM and 2 X 2.7 GHz CPUs, each with 12
> cores. but I'm running only one squid worker. At the moment, there ar
Hi,
Does anybody know what the remote= in this Squid Log entry means?
>Accepting HTTP Socket connections at local=127.0.0.1:3128 remote=[::] FD 8
>flags=9
Kind regards
Marc
Hello Squid Users!
I have a TPROXY server built with squid V. 3.3.7, which was compiled from
source. The server has 192 GB of RAM and 2 X 2.7 GHz CPUs, each with 12 cores.
but I'm running only one squid worker. At the moment, there are 17 squid
clients and the server is receiving 20025 http req
Resending the mail. As always my mails DONT always reach the group.
Sometimes reaches, sometimes not from past 1-2 months.
I reported this earlier too.There some issue with seconday MX record.
Also may be there is issue with connectivity with Yahoo. As after
1-2days mail bounces back with timeout
18 matches
Mail list logo
