> so now that the sensor types got adjusted, here's the tty_nmea.c diff
> again, adding 7 new sensors:
> - # satellites (raw)
> - GPS/DGPS fix (or not) (raw)
> - HDOP/VDOP/PDOP (raw)
> - Altitude (m)
> - Speed (m/s)
Yay sensors!
> i'd welcome eyes on the logic, and especially on the nmea_atoi()
>
Hi,
so now that the sensor types got adjusted, here's the tty_nmea.c diff
again, adding 7 new sensors:
- # satellites (raw)
- GPS/DGPS fix (or not) (raw)
- HDOP/VDOP/PDOP (raw)
- Altitude (m)
- Speed (m/s)
i'd welcome eyes on the logic, and especially on the nmea_atoi()
implementation - it is ins
Hi tech,
this allows to adjust the priority of the routes that ospf6d inserts
into the kernel routing table.
It's basically the same change that I commited to ospfd today (without
reload support).
OK?
Remi
Index: kroute.c
===
RC
Hi,
so i've updated my 'video' class for pledge and also did an initial
naive pledging of xenocara/app/video:
the kernel diff is the same subset as the diff from some months ago,
except that it adds:
- VIDIOC_QUERYCTRL/VIDIOC_G_CTRL/VIDIOC_S_CTRL: those 3 are used by
video(1) to set gamma/contr
On Fri, Dec 28, 2018 at 05:21:02PM +0100, Denis Fondras wrote:
> On Fri, Dec 28, 2018 at 03:15:35PM +0100, Claudio Jeker wrote:
> > > /*
> > > * This function will have undefined behaviour if the passed in
> > > prefixlen is
> > > - * to large for the respective bgpd_addr address family.
> > >
On Fri, Dec 28, 2018 at 07:50:08PM +0100, Denis Fondras wrote:
> On Fri, Dec 28, 2018 at 06:08:16PM +0100, Klemens Nanni wrote:
> > On Fri, Dec 28, 2018 at 05:21:02PM +0100, Denis Fondras wrote:
> > > int
> > > +krVPN6_change(struct ktable *kt, struct kroute_full *kl, u_int8_t
> > > fib_prio)
> >
On Fri, Dec 28, 2018 at 06:08:16PM +0100, Klemens Nanni wrote:
> On Fri, Dec 28, 2018 at 05:21:02PM +0100, Denis Fondras wrote:
> > int
> > +krVPN6_change(struct ktable *kt, struct kroute_full *kl, u_int8_t fib_prio)
> > +{
> > + struct kroute6_node *kr6;
> > + struct in6_addr lo6
On Fri, Dec 28, 2018 at 05:21:02PM +0100, Denis Fondras wrote:
> int
> +krVPN6_change(struct ktable *kt, struct kroute_full *kl, u_int8_t fib_prio)
> +{
> + struct kroute6_node *kr6;
> + struct in6_addr lo6 = IN6ADDR_LOOPBACK_INIT;
> + int action = RTM
On Fri, Dec 28, 2018 at 03:15:35PM +0100, Claudio Jeker wrote:
> > /*
> > * This function will have undefined behaviour if the passed in prefixlen
> > is
> > - * to large for the respective bgpd_addr address family.
> > + * too large for the respective bgpd_addr address family.
> > */
> > in
On Fri, Dec 28, 2018 at 02:58:23PM +0100, Denis Fondras wrote:
> The parser sets curpeer->conf.capabilities.mp to -1 before setting it to
> either
> 1 or 0 by default. Set it to 0 by default and change it to 1 when needed.
>
> Index: parse.y
> =
On Tue, Dec 18, 2018 at 12:13:38PM +0100, Denis Fondras wrote:
> Here is a serie of diffs to enable MPLSv6, MPLS transport over IPv6.
>
> Second diff : add support for IPv6 MPLS routes exchange with bgpd(8).
>
> (***)
> pe1# cat /etc/hostname.mpe0
The parser sets curpeer->conf.capabilities.mp to -1 before setting it to either
1 or 0 by default. Set it to 0 by default and change it to 1 when needed.
Index: parse.y
===
RCS file: /cvs/src/usr.sbin/bgpd/parse.y,v
retrieving revisio
On Fri, Dec 28, 2018 at 02:32:54PM +0100, Remi Locherer wrote:
> ping
OK claudio@
> On Mon, Dec 10, 2018 at 10:40:22AM +0100, Remi Locherer wrote:
> > Hi,
> >
> > below patch adds "fib-priority" to ospfd.conf which allows to set a
> > custom priority to routes. 32 is still the default if not se
ping
On Mon, Dec 10, 2018 at 10:40:22AM +0100, Remi Locherer wrote:
> Hi,
>
> below patch adds "fib-priority" to ospfd.conf which allows to set a
> custom priority to routes. 32 is still the default if not set. Changing
> the priority with a reload is also supported.
>
> A discussion about the f
On Fri, Dec 28, 2018 at 01:25:02PM +0200, Lauri Tirkkonen wrote:
> Hi, trivial typo fix for getgrent.3.
fixed, thanks.
On Fri, Dec 28, 2018 at 12:16:05PM +0100, Denis Fondras wrote:
> Print well-known SAFI name instead of value.
>
> * Before:
> BGP (OPEN: Version 4, AS #65530, Holdtime 90, ID 10.2.2.2, Option length 44
> ((CAP MULTI_PROTOCOL [IPv4 Unicast], CAP MULTI_PROTOCOL [IPv4 #128], CAP
> MULTI_PROTOCOL [IPv
Hi, trivial typo fix for getgrent.3.
diff --git a/lib/libc/gen/getgrent.3 b/lib/libc/gen/getgrent.3
index d3c12bad042..f26ae625997 100644
--- a/lib/libc/gen/getgrent.3
+++ b/lib/libc/gen/getgrent.3
@@ -193,7 +193,7 @@ group database file
.El
.Sh ERRORS
The
-.Fn getgruid_r
+.Fn getgrgid_r
and
Print well-known SAFI name instead of value.
* Before:
BGP (OPEN: Version 4, AS #65530, Holdtime 90, ID 10.2.2.2, Option length 44
((CAP MULTI_PROTOCOL [IPv4 Unicast], CAP MULTI_PROTOCOL [IPv4 #128], CAP
MULTI_PROTOCOL [IPv6 #128], CAP ROUTE_REFRESH, CAP GRACEFUL_RESTART [R], Time
90s (IPv4 Unicas
18 matches
Mail list logo