On Thu, Nov 18, 2010 at 11:55 AM, Corby Dawson wrote:
> Are there any terminal programs out there that allow you to select rates
> other than the standard values?
https://sites.google.com/site/terminalbpp/
Select 'Custom'.
--
http://blog.softwaresafety.net/
http://www.designer-iii.com/
http:/
Hi
If you run through the article the author claims that he's getting a few
hundred feet of range with a few hundred mw of power into a good antenna.
Your cell phone and FM broadcast radio are equally susceptible under typical
conditions.
Bob
On Nov 22, 2010, at 8:24 PM, scmcgr...@gmail.com
The Phrack article's jammer attacks the offset frequencies.
Phrack.org/issues.html?issue=60&id=13
This article shows just how vulnerable L1 GPS is
Scott
Sent from my Verizon Wireless BlackBerry
-Original Message-
From: Magnus Danielson
Sender: time-nuts-boun...@febo.com
Date: Tue, 23 N
On 11/23/2010 12:19 AM, Bob Camp wrote:
Hi
There is *very* little signal hitting the ground from a normal GPS bird. Even a
few mili watts close at hand is going to be an enormous overload. The typical
GPS does not use a lot of bits in the front end A/D.
I suspect that if you tuned your little
Hi
There is *very* little signal hitting the ground from a normal GPS bird. Even a
few mili watts close at hand is going to be an enormous overload. The typical
GPS does not use a lot of bits in the front end A/D.
I suspect that if you tuned your little gizmo down to the FM broadcast band, it
Looked at the schematics front end is simple. Essentially op amps notch
filters and most important electronic selectable attenuators. Any of it
could cause issues. But the good news is a amplified loran signal is on the
back of the unit so you could look to see whats happening to the signal.
Oh oth
John
Civillian GPS is extremely susceptible to jamming and interference. Which is
why the LORAN shutdown puts the entire transportation infrastructure at risk.
Your jammer is probably derived from the one described in Phrack magazine where
the theory was extensively discussed.
But in the rea
My thats a reasonable answer indeed.
On Mon, Nov 22, 2010 at 12:24 PM, Stan, W1LE wrote:
> It is not just one page. What are you specifically looking for ?
> Most sheets are B size ( double A size).
>
> I got the complete manual from SRS for ~35$
>
> Stan, W1LE
>
>
>
> On 11/22/2010 10:00 AM,
Given that this is an extremely sensitive topic and completely illegal
also, let me just state at the outset that I have no interest in
jamming anyone's GPS. A while back, I was looking at one of those
Chinese discount electronics websites, I'm sure we all have, and
noticed a GPS jammer for sale. I
It is not just one page. What are you specifically looking for ?
Most sheets are B size ( double A size).
I got the complete manual from SRS for ~35$
Stan, W1LE
On 11/22/2010 10:00 AM, Ulrich Bangert wrote:
Gentlemen,
I know this one has been asked a few years before but I give it another
Paul,
I just received an answer fom TVB. Before you engage in any kind of business
concerning the copies let us wait whether Tom has the schematics.
73s de Ulrich, DF6JB
> -Ursprungliche Nachricht-
> Von: time-nuts-boun...@febo.com
> [mailto:time-nuts-boun...@febo.com] Im Auftrag von pa
I have a 10.23 MHz 10811 oscillator out of an early GPS simulator
somewhere, so, FWIW, HP did make at least one. I remember it because I was
disappointed it was not 10.000 or 10.24 MHz.
Best,
-John
=
> Several issues here:
>
> 1. Making a precision crystal like the 10811 one i
Paul,
You can do it in a common scanner in two parts, then using any graphics
editor (i.e. Photoshop) rotate one of the files until they match and
paste both. I do it routinelly with all my oversize schematics. Or
just scan and let someone do the assembly (I can volunteer for some).
Regard
Several issues here:
1. Making a precision crystal like the 10811 one is very involved.
It cannot simply be rescaled to a different frequency. It represents
a whole new design. This is not like ordering custom crystals for
your 2 way radio (back in the day).
2. The 10.23 MHz crystals I am go
I have the manual and a working FS700 now. Maybe able to copy several pages.
Need to find a scanner for 11X14, and not sure when I can do that.
What problem are you having and perhaps we should take this offline.
Regards
Paul.
WB8TSL
On Mon, Nov 22, 2010 at 10:00 AM, Ulrich Bangert wrote:
> Gent
Gentlemen,
I know this one has been asked a few years before but I give it another try:
Has anyone of you a Stanford Research FS700 schematic available that he can
share with me?
Best regards
Ulrich Bangert
www.ulrich-bangert.de
Ortholzer Weg 1
27243 Gross Ippener
___
On 11/18/2010 2:32 PM, Elio Corbolante wrote:
>> From: Hal Murray
>>> Are there any terminal programs out there that allow you to select rates
>>> other than the standard values?
> You can use the wonderful Tera Term (http://ttssh2.sourceforge.jp/):
> it accepts nonstandard values in the speed pa
On 11/22/2010 7:22 AM, Oz, in DFW wrote:
> On 11/14/2010 12:08 PM, Magnus Danielson wrote:
>> In the first stage, the input signals is mixed by the
> Magnus,
>
> I'm writing you directly because I want to avoid a nitpicking flame war
>
Well, apparently I screwed up and didn't write you directly
On 11/14/2010 12:08 PM, Magnus Danielson wrote:
> In the first stage, the input signals is mixed by the average
> frequency (37 MHz in this case) causing the beat frequencies to become
> roughly the same (27 MHz in this case). The second stage would then
> act as as the normal offset local oscillat
A friend of mine had a need for a round 500Kbit baud rate. What he did
was use some FDTI USB/RS232 chip.
He could patch the timing values for an existing baud rate (300 baud or
something else normally not used). I believe in the Windows registry.
This way the (terminal) software can select the pat
20 matches
Mail list logo