Gents
I have a S14WI GPS antenna splitter w. Opt :
Amplified + DC Bias Select + Ant Current monitor
It's connected to a Maxrad 40dB ice cone timing antenna
DS for the spliter here
http://www.amtechs.co.jp/2_gps/pdf/S14WI_spec.pdf
http://tinyurl.com/nfmpyqm
Currently i have this connected :
xne...@luna.dyndns.dk said:
The LTE-Lite is 3v3 , and wouldn't like to get 5v on it's antenna.
I'd put a voltmeter on that connector and see if the splitter is sending
anything out.
My scan of the data sheet looks like it will do the right thing.
--
These are my opinions. I hate spam.
: [time-nuts] LTE-Lite and
- S14WI 1x4 GPS splitter /divdiv
/divGents
I have a S14WI GPS antenna splitter w. Opt :
Amplified + DC Bias Select + Ant Current monitor
It's connected to a Maxrad 40dB ice cone timing antenna
DS for the spliter here
http://www.amtechs.co.jp/2_gps/pdf/S14WI_spec.pdf
http
On Sat, 29 Nov 2014 10:54:17 +0100, Björn wrote:
Hi!
The splitter will not route 5V back out to another splitter port. Your
gpsd(tcx)o antenna port is safe.
Thanx Hal Björn
I have connected it , and it seems to be running fine
It has been on for about 1 hr now.
. But, contact them. They'll
fix you right up.
By the way, if your ports are labeled, PDC = powered DC and BDC = blocked DC.
Bob - AE6RV
From: cfo xne...@luna.dyndns.dk
To: time-nuts@febo.com
Sent: Saturday, November 29, 2014 1:53 AM
Subject: [time-nuts] LTE-Lite and - S14WI 1x4 GPS splitter
, 2014 1:53 AM
Subject: [time-nuts] LTE-Lite and - S14WI 1x4 GPS splitter
Gents
I have a S14WI GPS antenna splitter w. Opt :
Amplified + DC Bias Select + Ant Current monitor
It's connected to a Maxrad 40dB ice cone timing antenna
DS for the spliter here
http://www.amtechs.co.jp/2_gps/pdf