Hi
Yes, there is what appears to be a socketed ROM on the board. Next step seems
to be to dump
the ROM and see what’s inside.
Bob
> On Apr 9, 2018, at 3:55 PM, Forrest Christian (List Account)
> wrote:
>
> Just curious, is there by chance a removable eprom or other
Just curious, is there by chance a removable eprom or other programmable
device on these boards?
Assuming a fairly verbose scpi like command interface, I've occasionally
had luck reverse engineering a command set by looking through an eprom dump
for a list of commands?
Also, does this by chance
I have two of these with 488 interfaces.
Would appreciate any 488 info you get.
br...@otelco.net
-Original Message-
From: Bob kb8tq
Sent: Saturday, April 07, 2018 10:27 PM
To: lee...@aol.com ; Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Looking for
Hi
Actually the manual is moot on any sort of remote control. The RS-232 section
refers you to an insert
in the back of the manual. I’d guess that the 488 stuff was done the same way.
Nasty question: Are you sure you have the 488 option installed? It would not
be the first piece of gear