Hi
There appear to be a lot of the cut off boards. The assemblies may well be
usable “as is”. It’s too bad there aren’t more of them. At the price, they are
(used to be) an attractive alternative.
Bob
> On Jan 10, 2021, at 8:41 PM, Didier Juges wrote:
>
> ebay seller Queen's Land sent me
Can somebody point me to a connection diagram for the external connections tp
the carrier boards?
___
time-nuts mailing list -- time-nuts@lists.febo.com
To unsubscribe, go to
http://lists.febo.com/mailman/listinfo/time-nuts_lists.febo.com
and follow
Am Sonntag, 10. Januar 2021, 17:30:52 CET schrieb Ben Hall:
> While on the NTP-Sec server, on the output of ntpq, there are at least four:
>
> delay offset jitter
> ==
> 0. 0.0740 0.0027
> 85.4951 -1.7276 11.7616
> 40.9579 -1.9249 13.8848
> 25.7753 -0.5499
Am Samstag, 9. Januar 2021, 23:38:35 CET schrieb gandal...@aol.com:
> Now a question, supposing someone did follow that diagram and applied 5
> Volts to Vcc on the M8T, what is the risk of damage and would it be
> immediately obvious?
The commonly agreed upon definition of an abs max rating is
Good morning all,
Several weeks ago, my Raspberry Pi (RPi) based GPS/NTP server quit
working. I really can't complain, I want to say that it's been up,
operational, and serving network time to my network for at least two years.
I immediately rebuilt the installation from scratch on a new
Hi Adam,
> I've read several articles lately claiming that the Earth is spinning
much
> faster since 2020.
Yes, quiet, then many articles in a few days, then quiet. It's been
fascinating to see how technical news morphs and scary how fast it
spreads. Some of the headlines are creative to
Hi
I think that the honest answer is that there are *always* systems that get
tangled
when there is a leap second of any sort. If you dig back a bit on the list
there are
number of posts talking about abolishing them because of the many difficulties
with handling them.
One of the reasons
Hi.
I've read several articles lately claiming that the Earth is spinning much
faster since 2020. I didn't see anything definite directly from IERS about
this, but I was wondering if the systems are ready for a negative leap
second some time in the future?
Many thanks for the comments on this, I've since heard from the seller who
tells me they were listed as tested after being pulled from working kit and
haven't been tested since at 5 volts, phew:-)
I remember the missing diodes on fluke.l's version of the Tbolt monitor, and
also seem to remember
We use the board but my boards are presently in Connecticut so I can not check.
Pin 18 of the Ublox is used to feed power to an active antenna that is why the
Rf pin does not have a capacitor. I have fed 5V in to pin 18 on ny Saw Tooth
boards. Some one check if pin 8 in question is connected
On Samstag, 9. Januar 2021 23:38:35 CET Nigel gm8pzr via time-nuts wrote:
> I've dealt with this seller before, always been very happy with the results,
> and agreed a price on three such modules which arrived just before
> Christmas, for reference this particular Ebay ID was 333619130232, and
>
Well, the latency in the php web page I posted earlier bugged the heck out
of me so I redid it the "right" way:
http://www.ko4bb.com/js/clock/?tz=America/Los_Angeles,Europe/Paris,Asia/Novosibirsk
Now the web page loads a Javascript program that uses the local machine's
time, the internet is only
12 matches
Mail list logo