Hi,
I am working on CC2420 encryption on a tmote sky, and I am having issues
writing to the chipcon RAM.
To test the RAM, I have added wrappers in the CC2420Control interface
that call HPLChipconRAM.write/read. I have included CC2420RadioC in an
application, and wired an interface called RadioCo
hello everybody !! I wanted to know how to use two UARTs simultaneously. I'm currently working in a project ' DATA TRANSMISSION & RECEPTION VIA GPRS IN TINYOS ENVIRONMENT ' . Platform used is MSP430F1611. One UART is to be used for the reception of GPS packets . The other one shoul
Probably you need to (re)view some C programming fundamentals,
the "makes pointer from integer" thing sounds like you are
trying to pass a value where an address is required. If that
doesn't make any sense, then you DO need to read a C book.
Try the old famous Kernigan and Ritchie...
Otherwise, w
Hi , I am a beginner in this field. When I complied my code, it says that TestTempM.nc:82: warning: passing argument 1 of `Send.send' makes pointer from integer without a castTestTempM.nc:82: too many arguments to function `Send.send'TestTempM.nc: In function `ReceiveMsg.receive':TestTempM.n
ugh...aside from there being a few errant !'s in the code you sent,
the problem seems to be that it has to be in the default (top level)
package to work. After getting your simplified Circle.java file to
compile, moving it to tools/java/Circle.java, removing the
package statement, and javac'ing it
Out of curiousity, this is related to a problem I had today...
are these rewritten packets changed as far as received
signal strength goes? As I said in a previous email, the
micaz AM.h file declares TOS_Msg->strength as uint8_t
and regular AM.h is uint16_t. Now my micaz messages
being forwarded
Last question on the subject: I'm using micaz motes and
in tos/platform/micaz/AM.h, TOS_Msg->strength is listed
as type uint8_t and in tos/types/AM.h, TOS_Msg->strength
is listed as type uint16_t.
I found a really good reference for dissecting serial packets
here:
http://weblog.cs.uiowa.edu/294s
On Wed, 2006-01-18 at 15:39 -0600, Sam Pierson wrote:
> Hi everyone,
>
> I dug through the mailing list archives looking for some info on
> the received signal strength of incoming packets. I have one
> mote that transmits messages of type IntMsg over the radio.
> The other mote has TOSBase insta
On 1/18/06, Philip Levis <[EMAIL PROTECTED]> wrote:
> On Wed, 2006-01-18 at 15:39 -0600, Sam Pierson wrote:
>>When I
> > use the java tool ListenRaw, I get things like the following:
> >
> > 7E 42 FF FF 04 7D 5D 04 22 00 01 00 EA 1E
> > 7E 42 FF FF 04 7D 5D 04 23 00 01 00 5E 68
> > 7E 42 FF FF 04 7
Tasks execute first-come first-serve, and each task executes to
completion before the next task can begin. "Execute to completion"
means that your task routine must return / exit. Long running and
non-terminating tasks block all other tasks from executing.
Receive.receive is signaled from within
Hi,
I have been trying out Surge_Reliable in XBow apps (http://www.xbow.com/Support/Support_pdf_files/Crossbow.tgz) in TinyOS v1.1.7. It compiles and works fine. However, when i upgraded TinyOS to
v1.1.15, i found that the codes of Surge_Reliable would send the same identical packets many times
On Wed, 2006-01-18 at 15:39 -0600, Sam Pierson wrote:
> Hi everyone,
>
> I dug through the mailing list archives looking for some info on
> the received signal strength of incoming packets. I have one
> mote that transmits messages of type IntMsg over the radio.
> The other mote has TOSBase insta
On Wed, 2006-01-18 at 15:39 -0600, Sam Pierson wrote:
> Hi everyone,
>
> I dug through the mailing list archives looking for some info on
> the received signal strength of incoming packets. I have one
> mote that transmits messages of type IntMsg over the radio.
> The other mote has TOSBase insta
Hi everyone,
I dug through the mailing list archives looking for some info on
the received signal strength of incoming packets. I have one
mote that transmits messages of type IntMsg over the radio.
The other mote has TOSBase installed on it and is on the programming
board, which is then connecte
alright then. Your CLASSPATH does contain both . and tools/java
so that should be ok. I think you are having package naming problems,
but I don't get how "Circle (wrong name: > net/tinyos/oscope/Circle)"
comes up with oscope...
Coulda fooled me that you can embed the tag in the .java...
Like I s
Are you running the latest CVS snapshot?
I am running the latest CVS snapshot, and am get exactly the same error
as you. It was ok before I upgraded from the stable version.
Preethi Naveen wrote:
hi,
i have tried to run tinyviz as given in chapter 5 of tutorial. I am
getting the following e
you didn't put the for loop in an atomic{} block did you?
That would shut off interrupts...
MS
Andrea Pacini wrote:
I am using Tmote Sky motes and I noticed that , when a node is doing
something (e.g. when it is doing a for cycle) it can't receive message,
that is Receive.receive() event is no
I am using Tmote Sky motes and I noticed that , when a node is doing
something (e.g. when it is doing a for cycle) it can't receive message,
that is Receive.receive() event is not triggered.
Instead , if the node is doing nothing , the receive event is fired and
all woks.
Note that the sender se
Hi,
I am running into problems using the telosb TOSSIM simulator.
I am getting messages like
HPL.Fail : transmit from 0 to 1 failed (due to state being
STATE_TX_FRAME instead of RX_FRAME)
and
HPL.Fail : transmit from 1 to 0 failed (due to state being
STATE_RX_CALIBRATE instead of RX_FRAME)
R
That problem with mass erase command it's not important for me, cause I will
update all that information on each mote install. My problem consists in that
I'm not able to program that part, and as far as I now it's possible to do it
with normal telosb install.
when I do
$make telosb install bs
Hi all,
I am developing a small application. The mote does not take any action until it recevies a command message.
Thus the mote radio should be in a Listening state.
To cutdown the power consumption, I have
- called HPLPowerManagementM.Enable();
- turned all Leds off, or used NoLeds compon
By using TinyOS component "VoltageM.nc", A mote can read value of battery
voltage. But how to gain value of current? how to let a mote predict how much battery
power left? Thanks.
___
Tinyos-help mailing list
Tinyos-help@Millennium.Berkeley.EDU
https:/
22 matches
Mail list logo