Hi Simon,
On 07.02.15 01:28, Simon Glass wrote:
> On 6 February 2015 at 15:06, Andreas Bießmann
> wrote:
>> Signed-off-by: Andreas Bießmann
>> ---
>> This version still has the mmu_init_r() in common/board_r. Removing this now
>> is
>> not that easy ... I'd love to get it in as is and change it
From: David Feng
The cache disable operation shoud be performed after flush_dcache_all().
If cache disable operation is performed before
flush_dcache_all(), flush_dcache_all() store data directly to memory
and may be overrided by data copy in cache.
Signed-off-by: David Feng
---
arch/arm/cpu/a
From: Fabio Estevam
Currently by running the following test:
=> setenv bootcmd reset
=> save
=> reset
, we observe a hang after approximately 20-30 minutes of stress reboot test.
Investigation of this issue revealed that when a single DDR chip select is used,
the hang does not happen. It only
Hi Simon,
On 02/06/2015 06:45 AM, Simon Glass wrote:
> On 4 February 2015 at 23:31, Michal Simek wrote:
>> Hi,
>>
>> On 02/05/2015 04:07 AM, Simon Glass wrote:
>>> Hi Michal,
>>>
>>> On 3 February 2015 at 17:40, Simon Glass wrote:
Hi Michal,
On 3 February 2015 at 02:11, Michal Sim
Secure Boot Target is added for NAND for P3041.
Changes:
In PowerPC, the core begins execution from address 0xFFFC.
In case of secure boot, this default address maps to Boot ROM.
The Boot ROM code requires that the bootloader(U-boot) must lie
in 0 to 3.5G address space i.e. 0x0 - 0xDFFF.
I
On Mon, Feb 09, 2015 at 08:51:59AM +, feng...@phytium.com.cn wrote:
> From: David Feng
>
> The cache disable operation shoud be performed after flush_dcache_all().
> If cache disable operation is performed before
> flush_dcache_all(), flush_dcache_all() store data directly to memory
> and may
[...]
> > > The solution that was discussed internally would involve having the
> > > secure monitor (U-Boot's PSCI implementation in this case) program the
> > > flow controller appropriately, point the CPU reset vectors to a location
> > > containing a WFI instruction and power up the CPUs. That
Hi Ulises,
> -Original Message-
> From: ulises.carde...@freescale.com [mailto:ulises.carde...@freescale.com]
> Sent: Thursday, February 05, 2015 2:38 AM
> To: Gupta Ruchika-R66431
> Cc: u-boot@lists.denx.de; Estevam Fabio-R49496; sba...@denx.de; Ulises
> Cardenas Casas; Garg Nitin-B37173
>
Hi Stefano, Nikolay,
On 1/30/2015 1:54 AM, Stefano Babic wrote:
> Hi,
>
> On 12/01/2015 11:37, Nikolay Dimitrov wrote:
>> Hi Ye.Li,
>>
>> On 01/12/2015 10:46 AM, Ye.Li wrote:
>>> The I2C SDA and SCL require the IOMUX SION bit set to get input signal.
>>>
>>> Signed-off-by: Ye.Li
>>> ---
>>> arc
On Thu, 2015-01-15 at 23:39 +0300, Alexey Brodkin wrote:
> Dear Tom,
>
> The following changes since commit
> 28c4dae114c9b94b2ad81d4da716e9fc2cba:
>
> Merge branch 'next' of git://git.denx.de/u-boot-video (2015-01-14
> 16:26:15 -0500)
>
> are available in the git repository at:
>
> git
On Thu, 2015-01-15 at 23:39 +0300, Alexey Brodkin wrote:
> Dear Tom,
>
> The following changes since commit
> 28c4dae114c9b94b2ad81d4da716e9fc2cba:
>
> Merge branch 'next' of git://git.denx.de/u-boot-video (2015-01-14
> 16:26:15 -0500)
>
> are available in the git repository at:
>
> git
On Thu, 2015-01-15 at 23:39 +0300, Alexey Brodkin wrote:
> Dear Tom,
>
> The following changes since commit
> 28c4dae114c9b94b2ad81d4da716e9fc2cba:
>
> Merge branch 'next' of git://git.denx.de/u-boot-video (2015-01-14
> 16:26:15 -0500)
>
> are available in the git repository at:
>
> git
-Original Message-From: Alexey Brodkin
Reply-to:
To: Tom Rini
Cc: u-boot@lists.denx.de
Subject: Please pull u-boot-arc master
Date: Thu, 15 Jan 2015 23:39:45 +0300
Dear Tom,
The following changes since commit
28c4dae114c9b94b2ad81d4da716e9fc2cba:
Merge branch 'next' of git://git
-Original Message-From: Alexey Brodkin
Reply-to:
To: Tom Rini
Cc: u-boot@lists.denx.de
Subject: Please pull u-boot-arc master
Date: Thu, 15 Jan 2015 23:39:45 +0300
Dear Tom,
The following changes since commit
28c4dae114c9b94b2ad81d4da716e9fc2cba:
Merge branch 'next' of git://git
We can't use config.h directly as some platforms include headers that
aren't safe to use in normal Linux userland.
Signed-off-by: Tom Rini
---
tools/Makefile |4
tools/kwbimage.c |1 -
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/tools/Makefile b/tools/Makefile
in
On 02/09/2015 01:29 AM, Stefan Roese wrote:
> Hi,
>
> (added Marek to Cc)
>
> On 07.02.2015 01:11, Simon Glass wrote:
>> Hi Dinh,
>>
>> On 6 February 2015 at 16:36, Dinh Nguyen
>> wrote:
>>> Hi Simon,
>>>
>>> On 02/05/2015 10:41 PM, Simon Glass wrote:
Remove driver model CONFIGs from the bo
On Monday, February 09, 2015 at 05:45:37 PM, Dinh Nguyen wrote:
> On 02/09/2015 01:29 AM, Stefan Roese wrote:
> > Hi,
> >
> > (added Marek to Cc)
[...]
> >>> Would you need to also update socfpga_cyclone5_defconfig or is that not
> >>> needed?
> >>>
> >> From what I can tell it does not use dr
On Monday, February 09, 2015 at 05:50:34 PM, Dinh Nguyen wrote:
Hi!
[...]
> +
> +#endif /* CONFIG_SPL_BUILD */
> +
> +/* Configure the L2 controller to make SDRAM start at 0 */
> +writel(0x1, (SOCFPGA_MPUL2_ADDRESS +
SOCFPGA_MPUL2_ADRFLTR_START));
> >>>
On 02/07/2015 07:34 AM, Marek Vasut wrote:
> On Thursday, February 05, 2015 at 10:16:59 PM, Dinh Nguyen wrote:
>> On 01/14/2015 05:54 PM, Marek Vasut wrote:
>
> [...]
>
+ /*
+ * Private components security
+ * U-Boot : configure private timer, global timer and cpu
+ * c
On 02/07/2015 05:38 AM, Hans de Goede wrote:
The recent changes to config_distro_bootcmd.h require CONFIG_CMD_PART to be
defined, as the default bootcmd now uses the "part" command.
This fixes sunxi boards not booting with v2015.04-rc1.
Acked-by: Stephen Warren
___
On Mon, 2015-02-02 at 14:08 +0800, Josh Wu wrote:
> Hi, Scott
>
> On 1/16/2015 4:24 PM, Andreas Bießmann wrote:
> > Hi Bo, Josh,
> >
> > On 01/16/2015 07:50 AM, Josh Wu wrote:
> >> Hi, Bo
> >>
> >> On 1/16/2015 1:27 PM, Bo Shen wrote:
> >>> Hi Josh,
> >>>
> >>> On 01/16/2015 11:54 AM, Josh Wu wrot
On 02/08/2015 02:25 PM, Jörg Krause wrote:
On Fr, 2015-02-06 at 11:06 -0700, Stephen Warren wrote:
On 02/05/2015 06:06 PM, Jörg Krause wrote:
On Do, 2015-02-05 at 15:23 -0700, Stephen Warren wrote:
b) In ci_bounce(), the bounce buffer is only allocated if the
user-buffer is already aligned, a
Hi Fabio,
On 09/02/2015 10:29, Fabio Estevam wrote:
> From: Fabio Estevam
>
> Currently by running the following test:
>
> => setenv bootcmd reset
> => save
> => reset
>
> , we observe a hang after approximately 20-30 minutes of stress reboot test.
>
> Investigation of this issue revealed tha
On 30 January 2015 at 22:27, Lukasz Majewski wrote:
> Hi Dileep,
>
> > This is the Modified version of
> > http://patchwork.ozlabs.org/patch/388084/
> > - As flash support is already in mainline, it is removed
> > - 'oem' command support is present
> > - 'oem format' command is implemented
> >
On Sat, Feb 07, 2015 at 01:05:23AM +0900, Masahiro YAMADA wrote:
> Hi Tom,
>
>
> The following changes since commit 7f641d53bbb3a426a3bfb132d8346153e86a9d08:
>
> Merge branch 'master' of git://git.denx.de/u-boot-ubi (2015-02-04
> 13:30:00 -0500)
>
> are available in the git repository at:
>
On Mon, Feb 09, 2015 at 10:17:14AM -0500, Tom Rini wrote:
> We can't use config.h directly as some platforms include headers that
> aren't safe to use in normal Linux userland.
>
> Signed-off-by: Tom Rini
Applied to u-boot/master (testing of this is what held up the other PRs),
thanks!
--
To
On Fri, Feb 06, 2015 at 04:35:54PM +, Luka Perkov wrote:
> Hi Tom,
>
> this series contains the last bits of pending kirkwood/mvebu patches that I'm
> aware of. The changes from Gerald are minimal and I've merged Stefan's series
> which have reached v3 on the list.
>
> The following changes
On Mon, Feb 09, 2015 at 01:46:39PM +, Alexey Brodkin wrote:
> On Thu, 2015-01-15 at 23:39 +0300, Alexey Brodkin wrote:
> > Dear Tom,
> >
> > The following changes since commit
> > 28c4dae114c9b94b2ad81d4da716e9fc2cba:
> >
> > Merge branch 'next' of git://git.denx.de/u-boot-video (2015-0
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 02/09/2015 09:28 AM, Michal Simek wrote:
> Hi Tom,
>
> please consider to add these microblaze changes to your tree.
> It is moving Microblaze to use generic board support.
>
> I have also added one patch from Andreas which is the part avr32 serie
Hi,
I'm doing some work with U-Boot SPL, and noticed the following code in the
spl_parse_image_header function (common/spl/spl.c):
if (image_get_magic(header) == IH_MAGIC) {
if (spl_image.flags & SPL_COPY_PAYLOAD_ONLY) {
...
} else {
This patch series first adds the ability to read a signed integer from the
UBoot environment, then adds a patch to the Micrel ksz9031 phy driver to
program the skew values per settings in the UBoot environment. The strings
chosen to use in the UBoot environment are equivalent to those used by the
This patch adds the ability for the Micrel ksz9031 PHY driver to detect
skew settings from the UBoot environment and program those values at PHY
initialization time. This is a first step towards setting these values from
the UBoot environment or the Micrel PHY devicetree once supported. The skew
va
This patch adds a function to read a signed integer from the uboot environment
for the Micrel ksz9031 Phy driver to read postive and negatice skew values
from the uboot environment.
Signed-off-by: Vince Bridgers
---
common/cmd_nvedit.c | 22 +-
include/common.h| 1 +
2 f
On Monday, February 09, 2015 at 03:44:32 PM, Vince Bridgers wrote:
> This patch adds a function to read a signed integer from the uboot
> environment for the Micrel ksz9031 Phy driver to read postive and negatice
> skew values from the uboot environment.
>
> Signed-off-by: Vince Bridgers
Reviewe
On Monday, February 09, 2015 at 03:44:33 PM, Vince Bridgers wrote:
> This patch adds the ability for the Micrel ksz9031 PHY driver to detect
> skew settings from the UBoot environment and program those values at PHY
> initialization time. This is a first step towards setting these values from
> the
On Wednesday, February 04, 2015 at 02:39:52 PM, Pavel Machek wrote:
> On Fri 2015-01-30 23:08:46, Marek Vasut wrote:
> > Since all boards now have a DT, instead of hard-coding the board
> > name into the U-Boot binary, read the board name from DT "model"
> > property.
> >
> > Signed-off-by: Marek
On Friday, January 30, 2015 at 08:04:51 PM, Simon Glass wrote:
> Add a uclass that can represent a USB controller. For now we do not create
> devices for things attached to the controller.
>
> Signed-off-by: Simon Glass
[...]
> +UCLASS_DRIVER(usb) = {
> + .id = UCLASS_USB,
> +
On Friday, January 30, 2015 at 11:41:33 PM, Simon Glass wrote:
> Hi Marek,
Hi!
> On 30 January 2015 at 15:16, Marek Vasut wrote:
> > On Friday, January 30, 2015 at 08:04:50 PM, Simon Glass wrote:
> > > This series adds basic driver model support to USB. The intent is to
> > > permit the various
On Monday, February 02, 2015 at 08:47:52 AM, Stefan Roese wrote:
> On 30.01.2015 23:08, Marek Vasut wrote:
> > Add support for the Altera Arria V development kit.
> >
> > Signed-off-by: Marek Vasut
> > Cc: Chin Liang See
> > Cc: Dinh Nguyen
> > Cc: Pavel Machek
> > Cc: Stefan Roese
> > Cc: Vi
From: Raul Cardenas
Freescale's SEC block has built-in Data Encryption
Key(DEK) Blob Protocol which provides a method for
protecting a DEK for non-secure memory storage.
SEC block protects data in a data structure called
a Secret Key Blob, which provides both confidentiality
and integrity protect
Hi Marek!
> We already do this kind of a programming in board/altera/socfpga/socfpga.c
> in board_phy_config(), don't we ?
Yes, good point. This patch series is a first in some upcoming patches to make
this better. The Linux implementation uses devicetree settings to set the
skews, so if we wer
Hi Scott,
On 09.02.15 18:04, Scott Wood wrote:
> On Mon, 2015-02-02 at 14:08 +0800, Josh Wu wrote:
>> Hi, Scott
>>
>> On 1/16/2015 4:24 PM, Andreas Bießmann wrote:
>>> Hi Bo, Josh,
>>>
>>> On 01/16/2015 07:50 AM, Josh Wu wrote:
Hi, Bo
On 1/16/2015 1:27 PM, Bo Shen wrote:
> Hi Jo
On 9 February 2015 at 04:54, Siarhei Siamashka
wrote:
> On Sat, 31 Jan 2015 04:54:47 +0200
> Siarhei Siamashka wrote:
>
>> On Sun, 11 Jan 2015 20:34:55 +0100
>> Hans de Goede wrote:
>>
>> > Hookup OTG USB controller support and enable the otg controller + USB-keyb
>> > on various tablets.
>> >
>
Hi Siarhei,
On 8 February 2015 at 19:37, Siarhei Siamashka
wrote:
> An updated variant of the older patch
> http://lists.denx.de/pipermail/u-boot/2015-February/204024.html
>
> These patches are not for the u-boot code (unless u-boot decides to
> cannibalize the 'fel' tool later) but still pro
Hi MIchal,
On 9 February 2015 at 03:27, Michal Simek wrote:
> Hi Simon,
>
> On 02/06/2015 06:45 AM, Simon Glass wrote:
>> On 4 February 2015 at 23:31, Michal Simek wrote:
>>> Hi,
>>>
>>> On 02/05/2015 04:07 AM, Simon Glass wrote:
Hi Michal,
On 3 February 2015 at 17:40, Simon Glass
Hi Siarhei,
On 7 February 2015 at 20:48, Siarhei Siamashka
wrote:
> On Sat, 7 Feb 2015 10:47:30 -0700
> Simon Glass wrote:
>
>> Make sunxi's FEL code fit with the normal U-Boot boot sequence instead of
>> creating its own. There are some #ifdefs required in start.S. Future work
>> will hopefull
Hello Simon,
On 02/07/15 16:10, Simon Glass wrote:
I am not giving up, I think it is sane if a tool which adds a header and
a checksum does not use linker magic. Sandbox biggest problem is
not the linking, but the fact that linux headers and std* are included,
it is a different topic.
This
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.
Signed-off-by: Simon Glass
---
configs/stv0991_defconfig | 2 ++
include/configs/stv0991.h | 10 --
2 files changed, 2 insertions(+), 10 deletions(-)
diff --git a/configs/stv0991_defconfig b/configs/stv
Remove driver model CONFIGs from the board config headers and use Kconfig
instead.
Signed-off-by: Simon Glass
---
configs/mx6dlsabreauto_defconfig | 2 ++
configs/mx6dlsabresd_defconfig| 2 ++
configs/mx6qsabreauto_defconfig | 2 ++
configs/mx6qsabrelite_defconfig | 2 ++
configs/mx6qs
Hi, Andreas
On 2/10/2015 5:51 AM, Andreas Bießmann wrote:
Hi Scott,
On 09.02.15 18:04, Scott Wood wrote:
On Mon, 2015-02-02 at 14:08 +0800, Josh Wu wrote:
Hi, Scott
On 1/16/2015 4:24 PM, Andreas Bießmann wrote:
Hi Bo, Josh,
On 01/16/2015 07:50 AM, Josh Wu wrote:
Hi, Bo
On 1/16/2015 1:27
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Lei Wen
---
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm926ejs/Makefile | 1 -
arch/arm/cpu/arm926ejs/pantheon/Makefile | 9 --
arch/arm/cpu/arm926ejs/pantheon/cpu.c
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Syed Mohammed Khasim
Cc: Sughosh Ganu
---
arch/arm/cpu/arm926ejs/davinci/Kconfig| 4 -
board/davinci/da8xxevm/Kconfig| 13 --
board/davinci/da8xxevm/MAINTAINERS| 8 -
board/davinci/d
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Po-Yu Chuang
---
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm920t/Makefile | 1 -
arch/arm/cpu/arm920t/a320/Makefile| 9 --
arch/arm/cpu/arm920t/a320/reset.S | 10 --
arch/arm/cpu/arm9
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Guennadi Liakhovetski
---
arch/arm/Kconfig| 5 -
board/freescale/mx31ads/Kconfig | 15 --
board/freescale/mx31ads/MAINTAINERS | 6 -
board/freescale/mx31ads/Makefile| 8 -
b
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Matthias Weisser
---
arch/arm/Kconfig | 5 --
board/syteco/zmx25/Kconfig | 15
board/syteco/zmx25/MAINTAINERS | 6 --
board/syteco/zmx25/Makefile| 9 --
board/syteco/zmx25/lo
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Matthias Weisser
---
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm926ejs/Makefile | 1 -
arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 8 -
arch/arm/cpu/arm926ejs/mb86r0x/clock.c
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Guennadi Liakhovetski
---
arch/arm/Kconfig| 5 -
board/imx31_phycore/Kconfig | 12 ---
board/imx31_phycore/MAINTAINERS | 11 --
board/imx31_phycore/Makefile| 9 --
board/imx31_ph
Hi Masahiro,
On 8 February 2015 at 22:35, Masahiro Yamada wrote:
> Hi Simon,
>
>
> On Thu, 5 Feb 2015 21:41:44 -0700
> Simon Glass wrote:
>
>> Remove driver model CONFIGs from the board config headers and use Kconfig
>> instead.
>>
>> Signed-off-by: Simon Glass
>> ---
>>
>> Changes in v2: None
Hi Masahiro,
On 8 February 2015 at 20:43, Masahiro Yamada wrote:
> Hi Simon,
>
> On Thu, 5 Feb 2015 21:41:43 -0700
> Simon Glass wrote:
>
>> Remove driver model CONFIGs from the board config headers and use Kconfig
>> instead.
>>
>> Signed-off-by: Simon Glass
>> ---
>>
>> Changes in v2: None
>
Hi Ajay,
On Tue, 10 Feb 2015 05:06:45 +
Ajay Bhargav wrote:
>
>
> From: Masahiro Yamada
> Sent: Tuesday, February 10, 2015 10:14 AM
> To: u-boot@lists.denx.de
> Cc: Tom Rini; Albert Aribaud; Masahiro Yamada; Prafulla Wadaskar; Ajay
> Bhargav; Roma
Hi Marek,
On 9 February 2015 at 14:02, Marek Vasut wrote:
> On Friday, January 30, 2015 at 11:41:33 PM, Simon Glass wrote:
>> Hi Marek,
>
> Hi!
>
>> On 30 January 2015 at 15:16, Marek Vasut wrote:
>> > On Friday, January 30, 2015 at 08:04:50 PM, Simon Glass wrote:
>> > > This series adds basic d
On 09.02.2015 20:09, Marek Vasut wrote:
On Monday, February 02, 2015 at 08:47:52 AM, Stefan Roese wrote:
On 30.01.2015 23:08, Marek Vasut wrote:
Add support for the Altera Arria V development kit.
Signed-off-by: Marek Vasut
Cc: Chin Liang See
Cc: Dinh Nguyen
Cc: Pavel Machek
Cc: Stefan Roe
R8a7794 uses ARM SoC of CA7 base. If we want to use dcache on CA7, we
need to enable SMP bit of Auxiliary Control Register.
Signed-off-by: Nobuhiro Iwamatsu
---
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/
Hi,
2015-02-09 9:18 GMT+09:00 Vladimir Barinov
:
> Hi Nobuhiro,
>
> I apologize for missed qos.h header file in this commit.
> Please do find it in upcoming patch.
Yes, I noticed that the build test has failed now.
I will wait for the patch.
Thanks!
Nobuhiro
>
> Regards,
> Vladimir
>
>
> On 06.
Hi!
Applied, thanks!
Nobuhiro
2015-02-09 9:27 GMT+09:00 Vladimir Barinov
:
> This file was missed in the commit
> https://patchwork.ozlabs.org/patch/427801/
>
> Signed-off-by: Vladimir Barinov
>
> ---
> board/renesas/silk/qos.h | 13 +
> 1 file changed, 13 insertions(+)
> create m
From: Nobuhiro Iwamatsu
This adds drivers model support of serial port to Silk board,
and migrate serial port to drivers model.
Signed-off-by: Nobuhiro Iwamatsu
---
board/renesas/silk/silk.c | 14 ++
configs/silk_defconfig| 2 ++
include/configs/silk.h| 3 ---
3 files cha
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Chan-Taek Park
---
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm1176/Makefile | 1 -
arch/arm/cpu/arm1176/start.S | 22 --
arch/arm/cpu/arm1176/tnetv107x/Makef
Based on Tom's announce mail
(http://lists.denx.de/pipermail/u-boot/2015-February/203606.html),
let's start removing non-generic ARM boards.
No conversion patches have been posted for these boards.
Masahiro Yamada (11):
ARM: remove mx31ads board support
ARM: mx31: remove imx31_phycore boar
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Vladimir Zapolskiy
---
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm926ejs/Makefile | 1 -
arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 8 --
arch/arm/cpu/arm926ejs/lpc32xx/clk.
These are still non-generic boards.
Signed-off-by: Masahiro Yamada
Cc: Prafulla Wadaskar
Cc: Ajay Bhargav
---
arch/arm/Kconfig | 10 -
arch/arm/cpu/arm926ejs/Makefile| 1 -
arch/arm/cpu/arm926ejs/armada100/Makefile | 9 -
arc
> -Original Message-
> From: Ajay Bhargav [mailto:ajay.bhar...@einfochips.com]
> Sent: 10 February 2015 10:37
> To: Masahiro Yamada; u-boot@lists.denx.de
> Cc: Tom Rini; Albert Aribaud; Prafulla Wadaskar; Roman Byshko; Matthias
> Fuchs; Marek Vasut; Ivan Khoronzhuk; Jiandong Zheng; Oleksa
These are still non-generic boards.
Signed-off-by: Masahiro Yamada
Cc: Greg Ungerer
---
arch/arm/Kconfig| 10 -
arch/arm/cpu/arm920t/Makefile | 1 -
arch/arm/cpu/arm920t/ks8695/Makefile| 9 -
arch/arm/cpu/arm920t/ks8695/lowlevel_init.S | 1
From: Masahiro Yamada
Sent: Tuesday, February 10, 2015 10:14 AM
To: u-boot@lists.denx.de
Cc: Tom Rini; Albert Aribaud; Masahiro Yamada; Prafulla Wadaskar; Ajay Bhargav;
Roman Byshko; Matthias Fuchs; Marek Vasut; Ivan Khoronzhuk; Jiandong Zheng;
Oleksandr
R8a7794 uses ARM SoC of CA7 base. If we want to use dcache on CA7, we
need to enable SMP bit of Auxiliary Control Register.
Signed-off-by: Nobuhiro Iwamatsu
---
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 10 +-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/
r8a7794 uses ARM SoC of CA7 base. If we want to use dcache on CA7, we
need to enable SMP bit of Auxiliary Control Register.
Signed-off-by: Nobuhiro Iwamatsu
---
v2: Add CONFIG_DCACHE_OFF.
arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S | 12 +++-
1 file changed, 11 insertions(+), 1 del
Initialization of ACTLR.SMP is in lowlevel_init.
This remove duplicate function.
Signed-off-by: Nobuhiro Iwamatsu
---
board/renesas/silk/silk.c | 12
1 file changed, 12 deletions(-)
diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c
index 6bba41e..8fb729a 100644
---
This patch set is to add DT support for mxc_gpio driver.
patch 1/3, a new dev_get_addr interface is abstracted to
improve driver who want to get device address.
patch 2/3, add a new bank_index entry in platdata to avoid `plat - mxc_plat`
pointer subtract usage.
patch 3/3, add
Add a new entry in platdata structure and intialize
bank_index in mxc_plat array.
This new entry can avoid using `plat - mxc_plat` by using
`plat->bank_index`.
Signed-off-by: Peng Fan
Acked-by: Igor Grinberg
---
drivers/gpio/mxc_gpio.c | 17 +
1 file changed, 9 insertions(+), 8
Abstracting dev_get_addr can improve drivers that want to
get device's address.
Signed-off-by: Peng Fan
Acked-by: Igor Grinberg
---
drivers/core/device.c | 12
include/dm/device.h | 10 ++
2 files changed, 22 insertions(+)
diff --git a/drivers/core/device.c b/drivers/cor
This patch add DT support for mxc gpio driver.
There are one place using CONFIG_OF_CONTROL macro.
1. The U_BOOT_DEVICES and mxc_plat array are complied out. To DT,
platdata is alloced using calloc, so there is no need to use mxc_plat.
The following situations are tested, and all work fine:
1.
The "get board rev" firmware API doesn't seem to return a useful value on
this platform, so we hard-code the board ID for now, since there's only
one bcm2836-based RPi board at present.
USB doesn't seem to work yet; the controller detects the on-board Hub/
Ethernet device but can't read the descri
The bcm2835 and bcm2836 are essentially identical, except:
- The CPU is an ARM1176 v.s. a quad-core Cortex-A7.
- The physical address of many IO controllers has moved.
Rather than introducing a whole new bcm2836 value for $(SOC) or $(ARCH),
update the existing bcm2835 code to handle the minor diff
Signed-off-by: Stephen Warren
---
arch/arm/cpu/arm1176/bcm2835/Makefile | 12 ++--
arch/arm/include/asm/arch-bcm2835/sdhci.h | 12 +---
arch/arm/include/asm/arch-bcm2835/timer.h | 12 +---
arch/arm/include/asm/arch-bcm2835/wdog.h | 12 +---
board/raspberrypi/r
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Po-Yu Chuang
---
Changes in v2: None
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm920t/Makefile | 1 -
arch/arm/cpu/arm920t/a320/Makefile| 9 --
arch/arm/cpu/arm920t/a320/reset.S | 10
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Matthias Weisser
---
Changes in v2: None
arch/arm/Kconfig | 5 --
board/syteco/zmx25/Kconfig | 15
board/syteco/zmx25/MAINTAINERS | 6 --
board/syteco/zmx25/Makefile| 9 --
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Lei Wen
---
Changes in v2: None
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm926ejs/Makefile | 1 -
arch/arm/cpu/arm926ejs/pantheon/Makefile | 9 --
arch/arm/cpu/arm926ejs/pa
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Matthias Weisser
---
Changes in v2: None
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm926ejs/Makefile | 1 -
arch/arm/cpu/arm926ejs/mb86r0x/Makefile | 8 -
arch/arm/cpu/arm926e
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Guennadi Liakhovetski
---
Changes in v2: None
arch/arm/Kconfig| 5 -
board/imx31_phycore/Kconfig | 12 ---
board/imx31_phycore/MAINTAINERS | 11 --
board/imx31_phycore/Makefile|
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Syed Mohammed Khasim
Cc: Sughosh Ganu
---
Changes in v2: None
arch/arm/cpu/arm926ejs/davinci/Kconfig| 4 -
board/davinci/da8xxevm/Kconfig| 13 --
board/davinci/da8xxevm/MAINTAINERS|
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Guennadi Liakhovetski
---
arch/arm/Kconfig| 5 -
board/freescale/mx31ads/Kconfig | 15 --
board/freescale/mx31ads/MAINTAINERS | 6 -
board/freescale/mx31ads/Makefile| 8 -
bo
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Chan-Taek Park
---
Changes in v2: None
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm1176/Makefile | 1 -
arch/arm/cpu/arm1176/start.S | 22 --
arch/arm/cpu/ar
These are still non-generic boards.
Signed-off-by: Masahiro Yamada
Cc: Greg Ungerer
---
Changes in v2: None
arch/arm/Kconfig| 10 -
arch/arm/cpu/arm920t/Makefile | 1 -
arch/arm/cpu/arm920t/ks8695/Makefile| 9 -
arch/arm/cpu/arm920t/ks869
This is still a non-generic board.
Signed-off-by: Masahiro Yamada
Cc: Vladimir Zapolskiy
---
Changes in v2: None
arch/arm/Kconfig | 5 -
arch/arm/cpu/arm926ejs/Makefile | 1 -
arch/arm/cpu/arm926ejs/lpc32xx/Makefile | 8 --
arch/arm/cpu/a
Based on Tom's announce mail
(http://lists.denx.de/pipermail/u-boot/2015-February/203606.html),
let's start removing non-generic ARM boards.
No conversion patches have been posted for these boards.
Changes in v2:
- Do not remove armada100 boards because Ajay will send a patch
to convert t
On 02/10/15 08:46, Peng Fan wrote:
> This patch add DT support for mxc gpio driver.
>
> There are one place using CONFIG_OF_CONTROL macro.
> 1. The U_BOOT_DEVICES and mxc_plat array are complied out. To DT,
>platdata is alloced using calloc, so there is no need to use mxc_plat.
>
> The follow
95 matches
Mail list logo