Heinrich,
On Sat, May 26, 2018 at 10:34:47AM +0200, Heinrich Schuchardt wrote:
> Signed-off-by: Heinrich Schuchardt
> ---
> lib/efi_selftest/efi_selftest_block_device.c | 56
> 1 file changed, 56 insertions(+)
>
> diff --git a/lib/efi_selftest/efi_selftest_block_device.c
>
Tuomas,
On Thu, May 31, 2018 at 01:32:20PM +0300, Tuomas Tynkkynen wrote:
> Hi Akashi,
>
> On 05/31/2018 08:05 AM, AKASHI Takahiro wrote:
> >Simon,
> >
> >On Wed, May 30, 2018 at 01:18:30PM -0600, Simon Glass wrote:
> >>+Tuomas
> >>
> >>Hi Akashi,
> >>
> >>On 28 May 2018 at 01:59, AKASHI Takahiro
On 06/01/2018 02:23 AM, Tom Rini wrote:
> On Thu, May 31, 2018 at 08:06:50PM +0200, Marek Vasut wrote:
>
>> The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
>>
>> add FIT data-position & data-offset property support (2018-05-26
>> 18:19:19 -0400)
>>
>> are available i
On Fri, Jun 1, 2018 at 2:31 PM, Marek Vasut wrote:
> On 06/01/2018 02:23 AM, Tom Rini wrote:
>> On Thu, May 31, 2018 at 08:06:50PM +0200, Marek Vasut wrote:
>>
>>> The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
>>>
>>> add FIT data-position & data-offset property su
On 06/01/2018 09:13 AM, AKASHI, Takahiro wrote:
> Heinrich,
>
> On Sat, May 26, 2018 at 10:34:47AM +0200, Heinrich Schuchardt wrote:
>> Signed-off-by: Heinrich Schuchardt
>> ---
>> lib/efi_selftest/efi_selftest_block_device.c | 56
>> 1 file changed, 56 insertions(+)
>>
>> d
Add mtdparts description for the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/alt_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/alt_defconfig b/configs/alt_defconfig
index b0b864c1a1..49f344babd 100644
--- a/configs/alt_defconfig
+++ b/configs
Enable MTD partitioning support on Gen2 boards with SPI NORs.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
include/configs/rcar-gen2-common.h | 8
1 file changed, 8 insertions(+)
diff --git a/include/configs/rcar-gen2-common.h
b/include/configs/rcar-gen2-common.h
index eadf55
Add mtdparts description for the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/gose_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/gose_defconfig b/configs/gose_defconfig
index 8479887604..4b8c5a4aea 100644
--- a/configs/gose_defconfig
+++ b/con
Add mtdparts description for the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/lager_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/lager_defconfig b/configs/lager_defconfig
index 70083bcbfe..0eaf33d7f8 100644
--- a/configs/lager_defconfig
+++ b
Add mtdparts description for the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/koelsch_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/koelsch_defconfig b/configs/koelsch_defconfig
index faca596115..39d5805f94 100644
--- a/configs/koelsch_defconf
Add mtdparts description for the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/silk_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/silk_defconfig b/configs/silk_defconfig
index a1c4e5cde3..9a9301e7e0 100644
--- a/configs/silk_defconfig
+++ b/con
Add mtdparts description for the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/stout_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/stout_defconfig b/configs/stout_defconfig
index d940932baf..1a9e6ce366 100644
--- a/configs/stout_defconfig
+++ b
Add mtdparts description for the board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
configs/porter_defconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/configs/porter_defconfig b/configs/porter_defconfig
index b04627efa3..0588387cbd 100644
--- a/configs/porter_defconfig
+
Add support for the R8A77990 Ebisu board.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
arch/arm/dts/r8a77990-ebisu-u-boot.dts | 10
arch/arm/dts/r8a77990-u-boot.dtsi | 9
arch/arm/mach-rmobile/Kconfig.64 | 6 +++
board/renesas/ebisu/Kconfig| 15 ++
Add new compatible to the Ethernet AVB driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut
Cc: Joe Hershberger
Cc: Nobuhiro Iwamatsu
---
drivers/net/ravb.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/net/ravb.c b/drivers/net/ravb.c
index 3392e5854d..999894f0f6 100644
--- a/d
The PLL rate could be in the GHz range, which could overflow a 32bit
data type. Since the hardware is 64bit anyway, pass the clock rates
as 64bit number internally to avoid this.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/clk/renesas/clk-rcar-gen3.c | 56 --
Add clock tables for R8A77990 E3 SoC .
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/clk/renesas/Kconfig | 7 +
drivers/clk/renesas/Makefile | 1 +
drivers/clk/renesas/r8a77990-cpg-mssr.c | 303 ++
include/dt-bi
Add ID and Kconfig entry for the Renesas R8A77990 E3 SoC.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
arch/arm/mach-rmobile/Kconfig.64 | 3 +++
arch/arm/mach-rmobile/cpu_info.c | 1 +
arch/arm/mach-rmobile/include/mach/rmobile.h | 1 +
3 files changed, 5 inserti
From: Takeshi Kihara
This follows the style of existion PORT_GP_X macros and
will be used by a follow-up patch for the r8a77990 SoC.
Signed-off-by: Takeshi Kihara
Cc: Nobuhiro Iwamatsu
---
drivers/pinctrl/renesas/sh_pfc.h | 8 ++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --g
The mul and div arguments were reported in reverse order in the debug
message, swap them to fix this.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/clk/renesas/clk-rcar-gen3.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/renesas/clk-rcar-gen3.c
From: Takeshi Kihara
Basic support for the Renesas Ebisu board based on R-Car E3:
- Memory,
- Main crystal,
- Serial console,
Signed-off-by: Takeshi Kihara
[shimoda: rebase and add SPDX-License-Identifier]
Signed-off-by: Yoshihiro Shimoda
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
Add new compatible to the GPIO driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/gpio/gpio-rcar.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index b46621f76b..6fd1270640 100644
--- a/drivers/gpio
Add new compatible to the Uniphier SD driver for R8A77990 E3 SoC.
Signed-off-by: Marek Vasut
Cc: Masahiro Yamada
Cc: Nobuhiro Iwamatsu
---
drivers/mmc/renesas-sdhi.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index 62577895ee..ec
Add and use the PLL1 and PLL3 dividers.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/clk/renesas/clk-rcar-gen3.c | 12
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/clk/renesas/clk-rcar-gen3.c
b/drivers/clk/renesas/clk-rcar-gen3.c
index 834c
The PE clock have two parents, add support for picking the correct
one and deriving the clock from it.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/clk/renesas/clk-rcar-gen3.c | 40 +
drivers/clk/renesas/rcar-gen3-cpg.h | 6 --
2 files ch
This patch adds initial pinctrl driver to support for the R8A77990 SoC.
Signed-off-by: Takeshi Kihara
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
drivers/pinctrl/renesas/Kconfig| 11 +
drivers/pinctrl/renesas/Makefile |1 +
drivers/pinctrl/renesas/pfc-r8a77990.c |
Import the R8A77990 and Ebisu DTS from linux-next to get the latest
version. This makes AVB ethernet work in U-Boot since the ethernet
node is now present in DT, as well as GPIOs.
Signed-off-by: Marek Vasut
Cc: Nobuhiro Iwamatsu
---
arch/arm/dts/r8a77990-ebisu.dts | 28 +
arch/arm/dts/r8a7
From: Yoshihiro Shimoda
This patch adds basic support for the Renesas R-Car E3 (R8A77990) SoC:
- PSCI
- CPU (single)
- Cache controller
- Main clocks and controller
- Interrupt controller
- Timer
- PMU
- Reset controller
- Product register
- System controller
- UART for cons
On 06/01/2018 09:30 AM, Ley Foon Tan wrote:
> On Fri, Jun 1, 2018 at 2:31 PM, Marek Vasut wrote:
>> On 06/01/2018 02:23 AM, Tom Rini wrote:
>>> On Thu, May 31, 2018 at 08:06:50PM +0200, Marek Vasut wrote:
>>>
The following changes since commit
c3c863880479edeb5b08226e622d13c91326e4a7:
>
On Fri, Jun 1, 2018 at 3:49 PM, Marek Vasut wrote:
> On 06/01/2018 09:30 AM, Ley Foon Tan wrote:
>> On Fri, Jun 1, 2018 at 2:31 PM, Marek Vasut wrote:
>>> On 06/01/2018 02:23 AM, Tom Rini wrote:
On Thu, May 31, 2018 at 08:06:50PM +0200, Marek Vasut wrote:
> The following changes sin
On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
> Cast data_bytes to integer.
>
> Compilation warning as below:
>
> In file included from include/linux/bug.h:7:0,
> from include/common.h:26,
> from drivers/spi/cadence_qspi.c:8:
> drivers/spi/cadence_qspi.c: In functi
On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
> Cast to ulong data type.
>
> Compilation warning as below:
>
> CC spl/drivers/spi/cadence_qspi_apb.o
> LD spl/lib/built-in.o
> drivers/spi/cadence_qspi_apb.c: In function
> ‘cadence_qspi_apb_indirect_write_setup’:
> drivers/spi/cadence_
On 06/01/2018 10:03 AM, Ley Foon Tan wrote:
> On Fri, Jun 1, 2018 at 3:49 PM, Marek Vasut wrote:
>> On 06/01/2018 09:30 AM, Ley Foon Tan wrote:
>>> On Fri, Jun 1, 2018 at 2:31 PM, Marek Vasut wrote:
On 06/01/2018 02:23 AM, Tom Rini wrote:
> On Thu, May 31, 2018 at 08:06:50PM +0200, Marek
On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
> Change to use devfdt_get_addr_index() function to get fdt address.
>
> Original code has compilation warning below:
>
> drivers/spi/cadence_qspi.c: In function ‘cadence_spi_ofdata_to_platdata’:
> drivers/spi/cadence_qspi.c:297:18: warning: cast to poi
Add do_bridge_reset() function for Arria 10, it is required by misc.c.
arch/arm/mach-socfpga/built-in.o: In function `do_bridge':
arch/arm/mach-socfpga/misc.c:221: undefined reference to `do_bridge_reset'
make[1]: *** [u-boot] Error 1
Signed-off-by: Ley Foon Tan
---
arch/arm/mach-socfpga/misc_a
On Fri, Jun 1, 2018 at 4:07 PM, Marek Vasut wrote:
> On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
>> Cast data_bytes to integer.
>>
>> Compilation warning as below:
>>
>> In file included from include/linux/bug.h:7:0,
>> from include/common.h:26,
>> from drivers/sp
On Fri, Jun 1, 2018 at 4:07 PM, Marek Vasut wrote:
> On 05/07/2018 11:42 AM, Ley Foon Tan wrote:
>> Cast to ulong data type.
>>
>> Compilation warning as below:
>>
>> CC spl/drivers/spi/cadence_qspi_apb.o
>> LD spl/lib/built-in.o
>> drivers/spi/cadence_qspi_apb.c: In function
>> ‘ca
On 06/01/2018 10:13 AM, Ley Foon Tan wrote:
> Add do_bridge_reset() function for Arria 10, it is required by misc.c.
>
> arch/arm/mach-socfpga/built-in.o: In function `do_bridge':
> arch/arm/mach-socfpga/misc.c:221: undefined reference to `do_bridge_reset'
> make[1]: *** [u-boot] Error 1
>
> Sign
On 06/01/2018 10:13 AM, Ley Foon Tan wrote:
> Add do_bridge_reset() function for Arria 10, it is required by misc.c.
>
> arch/arm/mach-socfpga/built-in.o: In function `do_bridge':
> arch/arm/mach-socfpga/misc.c:221: undefined reference to `do_bridge_reset'
> make[1]: *** [u-boot] Error 1
>
> Sign
On Thu, May 31, 2018 at 09:43:20AM -0700, Vasily Khoruzhick wrote:
> On Thu, May 31, 2018 at 5:00 AM, Maxime Ripard
> wrote:
> > On Wed, May 30, 2018 at 09:02:18PM -0700, Vasily Khoruzhick wrote:
> >> That is necessary for using automatic calibration on A64 eMMC.
> >>
> >> Signed-off-by: Vasily kh
On 29.5.2018 16:33, Siva Durga Prasad Paladugu wrote:
> This patch updates sdhci_send_command() to handle MMC
> HS200 tuning command.
>
> Signed-off-by: Siva Durga Prasad Paladugu
> ---
> Changes from v1:
> - Fixed spacings as per comment
> ---
> drivers/mmc/sdhci.c | 9 ++---
> 1 file chang
On 29.5.2018 16:33, Siva Durga Prasad Paladugu wrote:
> This patch adds HS200 suuport for ZynqMP and enables
> the same for ZC1751 DC1 board which has eMMC on it.
>
> Signed-off-by: Siva Durga Prasad Paladugu
> ---
> Changes from v1:
> - Fixed coding style as per comment
> ---
> configs/xilinx_z
Add reset ctrl to dwmmc socfpga, designware Ethernet and ns16550 serial drivers.
A reset property is an optional feature, so only print out a warning and
do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of res
Add code to reset all reset signals as in serial DT node. A reset property is
an optional feature,
so do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.
Signed-off-by: Ley Foon Tan
Reviewed-by: Marek Vas
Add checking for CONFIG_SPL_RESET_SUPPORT to fix compilation error when
CONFIG_DM_RESET is enabled but CONFIG_SPL_RESET_SUPPORT is disabled in SPL
build.
Signed-off-by: Ley Foon Tan
---
include/reset.h | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/include/reset.h b/includ
Add code to reset all reset signals as in mmc DT node. A reset property is an
optional feature,
so only print out a warning and do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.
Signed-off-by: Ley Foon T
Add code to reset all reset signals as in Ethernet DT node. A reset property is
an optional feature,
so only print out a warning and do not fail if a reset property is not present.
If a reset property is discovered, then use it to deassert, thus bringing the
IP out of reset.
Signed-off-by: Ley F
Use "%lu" for size_t data type.
Compilation warning as below:
In file included from include/linux/bug.h:7:0,
from include/common.h:26,
from drivers/spi/cadence_qspi.c:8:
drivers/spi/cadence_qspi.c: In function ‘cadence_spi_xfer’:
drivers/spi/cadence_qspi.c:211:8:
Use "%p" to print cmdbuf.
Compilation warning as below:
CC spl/drivers/spi/cadence_qspi_apb.o
LD spl/lib/built-in.o
drivers/spi/cadence_qspi_apb.c: In function
‘cadence_qspi_apb_indirect_write_setup’:
drivers/spi/cadence_qspi_apb.c:696:18: warning: cast from pointer to integer of
On 05/31/2018 08:17 PM, Tom Rini wrote:
> On Sun, May 27, 2018 at 07:54:16PM +0200, Heinrich Schuchardt
> wrote:
>
>> The file is not referenced anywhere. To display a change log we
>> have the 'git log' command.
>>
>> Signed-off-by: Heinrich Schuchardt
>
> Applied to u-boot/master, thanks!
>
On Fri, Jun 1, 2018 at 1:32 AM, Martin Kelly wrote:
> On 05/31/2018 12:58 PM, klaus.go...@theobroma-systems.com wrote:
>>
[snip]
>>
>>
>> I run into the same issue for the rockchip architecture[1]. After giving
>> up on finding a
>> rock-solid solution for detecting the emtpy string I decided to
Now that Travis CI is building with gcc-7.3.0, we can add
build coverage for all combinations of MIPS Release 6
instruction sets (MIPS32, MIPS64, Big Endian, Little Endian).
Add mew default configs for Boston board for all MIPS Release 6
variants.
Signed-off-by: Daniel Schwierzeck
---
configs
On 06/01/2018 10:52 AM, Ley Foon Tan wrote:
> Use "%p" to print cmdbuf.
>
> Compilation warning as below:
>
> CC spl/drivers/spi/cadence_qspi_apb.o
> LD spl/lib/built-in.o
> drivers/spi/cadence_qspi_apb.c: In function
> ‘cadence_qspi_apb_indirect_write_setup’:
> drivers/spi/cadence
Hi Guys,
I met below error from time to time when build U-Boot project.
fixdep: error opening config file: arch/arm/include/asm/arch/hardware.h: No
such file or directory
The folder 'arch/arm/include/asm/arch' is a link for
'arch/arm/include/asm/arch-rockchip',
which is dynamic genera
On 06/01/2018 10:52 AM, Ley Foon Tan wrote:
> Use "%lu" for size_t data type.
>
> Compilation warning as below:
>
> In file included from include/linux/bug.h:7:0,
> from include/common.h:26,
> from drivers/spi/cadence_qspi.c:8:
> drivers/spi/cadence_qspi.c: In fu
On 06/01/2018 10:21 AM, AKASHI Takahiro wrote:
Tuomas,
On Thu, May 31, 2018 at 01:32:20PM +0300, Tuomas Tynkkynen wrote:
Hi Akashi,
On 05/31/2018 08:05 AM, AKASHI Takahiro wrote:
Simon,
On Wed, May 30, 2018 at 01:18:30PM -0600, Simon Glass wrote:
+Tuomas
Hi Akashi,
On 28 May 2018 at 01:59
On Thu, May 24, 2018 at 7:05 PM, Dr. Philipp Tomsich
wrote:
> Vincente,
>
> On 24 May 2018, at 18:48, Vicente Bergas wrote:
>
> Hello Philipp,
> your answer is much appreciated.
>
> On Thu, May 24, 2018 at 1:07 PM, Dr. Philipp Tomsich
> wrote:
>
> Vincente,
>
> On 19 May 2018, at 16:58, Vicente
Hi - I have a target Atheros 9344 board on which I have loaded U-boot
version 1.23.2. On the reference board, the DRAM clock frequency has
been set to 400 MHz and it works well. But when the same clock
frequency is used on my target board , mtest (memory test) fails.
However, when I reduced the clo
Hi York,
Sure, thanks for your suggestion. I'll add IMX_WATCHDOG in Kconfig, users can
enable it for the platforms they needed.
I will push v2 patch later, please help to review it, thanks.
Regards,
Xiaoliang Yang
-Original Message-
From: York Sun
Sent: 2018年6月1日 11:20
To: Xiaoliang Ya
Hi York,
I think it's better not to affect the original i.mx SoCs. If not in i.mx SoCs,
we can enable it by define CONFIG_IMX_WATCHDOG in config file. Or do you think
it's better to use "select IMX_WATCHDOG" to enable it in default for our LSCH2
SoCs/platforms?
Here is the patch I have changed
Support watchdog driver for fsl-lsch2. If you want to use it,
please enable CONFIG_IMX_WATCHDOG, and CONFIG_HW_WATCHDOG.
define CONFIG_WATCHDOG_TIMEOUT_MSECS to set watchdog timeout.
Signed-off-by: Xiaoliang Yang
---
arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 | 10 ++
drivers/w
Add Kconfig support for CONFIG_WATCHDOG_RESET_DISABLE, use this config
to disable watchdog reset in imx_watchdog driver, so that the watchdog
will not be fed in u-boot.
Signed-off-by: Xiaoliang Yang
---
arch/arm/cpu/armv8/fsl-layerscape/doc/README.lsch2 |3 +++
drivers/watchdog/Kconfig
v1 -> v2:
Because of imx_watchdog.c driver not supports all layerscape SoCs, change to
build imx_watchdog.o only when enable IMX_WATCHDOG for fsl-lsch2 SoCs.
Add IMX_WATCHDOG in drivers/watchdog/Kconfig.
Changes in v2:
drivers/watchdog/Kconfig |6 ++
drivers/watchd
On Thu, May 31, 2018 at 05:59:16PM -0700, Martin Kelly wrote:
> Currently, sunxi-common.h ignores CONFIG_DEFAULT_FDT_FILE and assumes
> the kernel fdtfile and the u-boot devicetree names are the same.
> Although this is typically the case, sometimes you might want to
> customize one of these differ
Hi Jean-Jacques,
> Using CONFIG_DM_USB for this purpose prevents using DM_USB for host
> and not for device.
>
> Signed-off-by: Jean-Jacques Hiblot
>
> ---
>
> Changes in v2:
> - select DM_USB_DEV by default for zynqmp platforms
>
> arch/arm/Kconfig| 2 ++
> drivers/usb/Kconf
Hi Jean-Jacques,
> Add 2 functions to wrap the calls to board_usb_init() and
> board_usb_cleanup().
> This is a preparatory work for DM support for UDC drivers
> (DM_USB_DEV).
>
> Signed-off-by: Jean-Jacques Hiblot
>
> ---
>
> Changes in v2:
> - Updated commit log
> - Fixed typo in thordown.c
Hi,
On 29.5.2018 14:36, Jean-Jacques Hiblot wrote:
> This series aims at bringing improvements to the dwc3_generic driver so
> that it can be used by most of the platforms using the dwc3 controller.
> This series applies on top of the master branch of USB tree.
> It also also available on github:
Hi Tom,
please pull these changes to your tree.
Buildman and travis looks good
https://travis-ci.org/michalsimek/u-boot/builds/386578029
Thanks,
Michal
The following changes since commit c3c863880479edeb5b08226e622d13c91326e4a7:
add FIT data-position & data-offset property support (2018-05-26
On 31.5.2018 11:40, Siva Durga Prasad Paladugu wrote:
> This patch modifies the arguments parsing code by parsing
> based on requested operation for fpga loadfs and then
> parses the most common/basic args for other fpga load
> commands. This makes it easy for new command extensions
> or additions
On 31 May 2018 at 01:57, Patrice Chotard wrote:
> From: Patrick Delaunay
>
> Don't disable regulator which are tagged as "regulator-always-on" in DT.
>
> Signed-off-by: Patrick Delaunay
> Signed-off-by: Patrice Chotard
> ---
>
> drivers/power/regulator/regulator-uclass.c | 5 +
> 1 file ch
Hi Tien,
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Enable DMAC driver support for DMA-330 controller.
> The driver is also compatible to PL330 product.
>
> Signed-off-by: Tien Fong Chee
> ---
> drivers/dma/Kconfig |9 +-
> drivers/dma/Makefile |1 +
> drivers/dma/dma
Hi Tien,
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> This new DMA class function enables DMA being used for initializing
> a range of destination such as memory to zeros. This is quite useful to
> help accelerating the performance in scrubbing memory when ECC is enabled.
>
> Sign
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Factor out the dma_get_device from DMA class function so caller can
> set some configuration and changes on the DMA device structure which
> is return by calling dma_get_device before device instance is processed by
> DMA class functions
Hi,
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Update the dma_memcpy description on return argument for DMA330 driver.
>
> Signed-off-by: Tien Fong Chee
> ---
> include/dma.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/include/dma.h b/include/d
On 31 May 2018 at 02:08, wrote:
> From: Tien Fong Chee
>
> Update pdma properties for Stratix 10
>
> Signed-off-by: Tien Fong Chee
> ---
> arch/arm/dts/socfpga_stratix10.dtsi | 20
> 1 file changed, 20 insertions(+)
Reviewed-by: Simon Glass
Is there a DT binding file fo
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add code to reset all reset signals as in mmc DT node. A reset property is an
> optional feature,
> so only print out a warning and do not fail if a reset property is not
> present.
>
> If a reset property is discovered, then use it to deassert, thu
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add code to reset all reset signals as in serial DT node. A reset property is
> an optional feature,
> so do not fail if a reset property is not present.
>
> If a reset property is discovered, then use it to deassert, thus bringing the
> IP out of re
Hi,
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add checking for CONFIG_SPL_RESET_SUPPORT to fix compilation error when
> CONFIG_DM_RESET is enabled but CONFIG_SPL_RESET_SUPPORT is disabled in SPL
> build.
>
> Signed-off-by: Ley Foon Tan
> ---
> include/reset.h | 3 ++-
> 1 file changed, 2 i
Hi Tom,
On 26 May 2018 at 11:06, Tom Rini wrote:
> The most portable way to get access to coverage is to invoke it as
> 'python-coverage'.
>
> Cc: Simon Glass
> Signed-off-by: Tom Rini
> ---
> So, here's the set of problems I have. First, running 'pip install
> coverage' doesn't get me a 'cove
On 1 June 2018 at 02:45, Ley Foon Tan wrote:
> Add code to reset all reset signals as in Ethernet DT node. A reset property
> is an optional feature,
> so only print out a warning and do not fail if a reset property is not
> present.
>
> If a reset property is discovered, then use it to deassert
Hi Tom,
On 28 May 2018 at 13:17, Tom Rini wrote:
> On Sat, May 26, 2018 at 04:18:45PM -0600, Simon Glass wrote:
>> Hi,
>>
>> On 15 May 2018 at 19:52, Simon Glass wrote:
>> > This series ads a few more features to binman, principally the ability to
>> > nest entries within other entries, to form
On 06/01/2018 12:37 AM, Xiaoliang Yang wrote:
> Support watchdog driver for fsl-lsch2. If you want to use it,
> please enable CONFIG_IMX_WATCHDOG, and CONFIG_HW_WATCHDOG.
> define CONFIG_WATCHDOG_TIMEOUT_MSECS to set watchdog timeout.
>
> Signed-off-by: Xiaoliang Yang
> ---
> arch/arm/cpu/armv8/
On Thu, May 31, 2018 at 03:13:15PM +0530, Jagan Teki wrote:
> On Thu, May 31, 2018 at 3:07 PM, Maxime Ripard
> wrote:
> > On Tue, May 29, 2018 at 09:50:39PM +0530, Jagan Teki wrote:
> >> On Tue, May 29, 2018 at 9:44 PM, Maxime Ripard
> >> wrote:
> >> > On Mon, May 28, 2018 at 04:34:43PM +0530, Ja
+Miquel due to sandbox TPM issue
Hi Tom,
On 25 May 2018 at 06:27, Tom Rini wrote:
> In order to have the test.py tests for TPMv2 run automatically we need
> to have one of our sandbox builds use TPMv2 rather than TPMv1. Switch
> sandbox_flattree over to this style of TPM.
The problem seems to
This series ads a few more features to binman, principally the ability to
nest entries within other entries, to form hierarchical images.
Also included are support for a map file and some docs tidy-ups.
Changes in v2:
- Add SPDX tag to .dts file
- Put SPDX on the first line in bsection.py
Simon
Allow the same binary to appear multiple times in an image by using the
device-tree unit-address feature (u-boot@0, u-boot@1).
Signed-off-by: Simon Glass
---
Changes in v2:
- Add SPDX tag to .dts file
tools/binman/README | 4
tools/binman/etype/entry.py | 5 +
We want to support multiple sections within a single image. To do this,
move most of the Image class implementation into a new Section class. An
Image contains only a single Section, but at some point we will support
a new 'section' entry, thus allowing Sections within Sections.
Use the name 'bsec
We now pass a Section object to these functions rather than an Image.
Rename the parameters to avoid confusion.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/elf.py | 10 +-
tools/binman/elf_test.py | 28 ++--
tools/binman/
Entries are now passed a Section object rather than an Image. Rename this
property to avoid confusion.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/etype/_testing.py| 4 ++--
tools/binman/etype/blob.py| 4 ++--
tools/binman/etype/entry.p
At present we set the Python path at the start of binman so we can read
modules in the 'etype' directory. This is a bit messy since it affects
'import' statements through binman.
Adjust the code to set the path locally, just where it is needed. Move
the 'entry' module in with the other base module
It is useful to be able to split an image into multiple sections,
each with its own size and position, for cases where a flash device has
read-only and read-write portions.
Add support for this.
Signed-off-by: Simon Glass
---
Changes in v2:
- Add SPDX tag to .dts file
tools/binman/README
This property is not documented. Add a note to the README.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 7 +++
1 file changed, 7 insertions(+)
diff --git a/tools/binman/README b/tools/binman/README
index 5ef1246f296..32d89194dd0 100644
--- a/tools/binman/README
Fix a few missing comments and tidy up some existing ones.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 6 +++---
tools/binman/ftest.py | 29 +++--
tools/binman/image.py | 5 +
3 files changed, 27 insertions(+), 13 deletions(-)
diff
It is useful to be able to see a list of regions in each image produced by
binman. Add a -m option to output this information in a '.map' file
alongside the image file.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 20 +++-
tools/binman/bsec
Sometimes we have several sections which repeat the same entries (e.g. for
a read-only and read-write version of the same section). It is useful to
be able to tell these entries apart by name.
Add a new 'name-prefix' property for sections, which causes all entries
within that section to have a giv
The documentation says this is not implemented, but it is. Update the
documentation, and clarify its operation.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/README | 7 +++
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/tools/binman/README b/tools/binman/R
Provide an easy way to execute a single binman test by specifying it on
the command line.
Signed-off-by: Simon Glass
---
Changes in v2: None
tools/binman/binman.py | 21 +
1 file changed, 17 insertions(+), 4 deletions(-)
diff --git a/tools/binman/binman.py b/tools/binman/b
Amarula A64-Relic is A64 based IoT device, which support
- Allwinner A64 Cortex-A53
- Mali-400MP2 GPU
- AXP803 PMIC
- 1GB DDR3 RAM
- 8GB eMMC
- AP6330 Wifi/BLE
- MIPI-DSI
- CSI: OV5640 sensor
- USB OTG
- 12V DC power supply
Signed-off-by: Jagan Teki
---
Changes for v4:
- Drop CMD_USB_MASS_STORAGE
On Mon, May 28, 2018 at 4:48 PM, Jagan Teki wrote:
> This series rework of previous version where it removes legacy
> usb phy handling and added phy driver on generic-phy framework.
>
> Current implementation phy driver is unable to get pinctrl, clock
> and reset details from DT since the dm code
On Mon, May 7, 2018 at 3:12 PM, Ley Foon Tan wrote:
> Change to use devfdt_get_addr_index() function to get fdt address.
>
> Original code has compilation warning below:
>
> drivers/spi/cadence_qspi.c: In function ‘cadence_spi_ofdata_to_platdata’:
> drivers/spi/cadence_qspi.c:297:18: warning: cast
1 - 100 of 125 matches
Mail list logo