Greg Erskine wrote:
> Can you try these commands.
>
> pCP is using the vcgencmd display_power command rather than the
> tvservice command.
>
> >
Code:
> > tc@pCP:~$ sudo tvservice -s
> state 0xa [HDMI CEA (31) RGB lim 16:9], 1920x1080 @ 50.00Hz, progressive
>
cburbs wrote:
> I noticed with *HDMI power* set to off on a few of my Pi's it is still
> on if I do the following.
>
> sudo tvservice -s
>
>
> state 0x4 [NTSC 4:3], 720x480 @ 60.00Hz, interlaced
>
> Why is that and can I fix it?
>
> The above is
jbraveman wrote:
> Ive noticed a problem that just cropped up. Im running picoreplayer
> 8.00 and lms 8.2.0 (windows). Two of my players are being confused by
> LMS. They switch back and forth on the sever. Music will play but then
> stops after a song. One of the players is remote and
I noticed with *HDMI power* set to off on a few of my Pi's it is still
on if I do the following.
sudo tvservice -s
state 0x4 [NTSC 4:3], 720x480 @ 60.00Hz, interlaced
Why is that and can I fix it?
cburbs's
Trying to upgrade one of my Players and get this -
WARNING: The resize partition 2 option has been disabled to prevent
damage to your SD Card.
You have:
partition 1 labelled "PCP" should be labelled "PCP_ROOT".
partition 2 labelled "" should be labelled "PCP_BOOT".
Filesystem
After a reboot squeezelite won't run anymore
This is with a hifiberry dac+ Pro
List of PLAYBACK Hardware Devices
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
Subdevices: 7/7
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Yep that worked - Thanks!
tc@piCorePlayer:~$ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
sysdefault:CARD=sndrpihifiberry
snd_rpi_hifiberry_dacplus,
Default Audio Device
HOw does one get the HiFiBerry DAC+ Pro to work with this software? I
can't seem to get it to work or find any fix.
Card shows up as
sysdefault:CARD=ALSA
bcm2835 ALSA, bcm2835 ALSA
Default Audio Device
cburbs's
Greg Erskine wrote:
> Hi cburbs,
>
> From your output, your USB card is CARD=1 or CARD=Audio.
>
> So probably hw:CARD=Audio will work.
>
> If you go to Squeezelite Settings > Output setting and click on More>,
> you will see more valid options.
>
> regards
Greg Erskine wrote:
> Hi cburbs,
>
> From your output, your USB card is CARD=1 or CARD=Audio.
>
> So probably hw:CARD=Audio will work.
>
> If you go to Squeezelite Settings > Output setting and click on More>,
> you will see more valid options.
>
> rega
I see the following but can't get it to work
cat /proc/asound/cards
0 [ALSA ]: bcm2835 - bcm2835 ALSA
bcm2835 ALSA
1 [Audio ]: USB-Audio - SA9227 USB Audio
HiFimeDIY Audio SA9227 USB Audio at
usb-2098.usb-1.5, high speed
aplay -l
List of PLAYBACK Hardware Devices
11 matches
Mail list logo