> From: users [mailto:users-boun...@dpdk.org] On Behalf Of Tushar Mulkar
> Sent: Thursday, January 11, 2018 1:55 PM
> To: users@dpdk.org
> Subject: Re: [dpdk-users] PF link status is not getting detected correctly
> by dpdk driver in VM
>
> Hi All,
Hi!
> So finally I a
Hi All,
So finally I am able to find the issue. Actually in dpdk i40evf driver,
the way link up/down is propagated is not working for me. Below change set
worked for me.
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
b/drivers/net/i40e/i40e_ethdev_vf.c
index 87a760796..0389f4bfa 100644
---
I think the IX710 device doesn't support the Link Change Interrupt. I have
enabled the debug traces and I could see following in the messages
Jan 10 02:07:53 packet-forwarding[1518]: rte_eth_dev_configure:
driver net_i40e_vf does not support lsc
Also I could verify that the virtual function
Hi All,
I am using "Ethernet Controller X710 for 10GbE SFP+" SRIOV NIC card on
the host with 8 VFs. Out of these VFs two VFs are associated with a VM, one
VF is bound to Linux kernel driver i40evf and another is bound to dpdk pmd
i.e. igb_uio.
when there is a link fault on the hardware