Hi Alex,
Did you ever get to the bottom of this?
regards
Mandeep
for this issue ?
>
> Really appreciate your response.
>
> Thanks,
> Ananda
>
>
> -Original Message-
> From: users On Behalf Of Alex Kiselev
> Sent: Sunday, May 27, 2018 9:09 AM
> To: Xing, Beilei ; users@dpdk.org; Zhang, Qi Z
>
> Subject: Re: [dpdk
; Zhang, Qi Z
Subject: Re: [dpdk-users] problem with an additional MAC address on i40e
Everything is fine with testmpd promisc mode, it was just my inattention.
The rest of my previous mail is still valid.
> Hi Beilei.
> I've found a way to reproduce the bug with the testpmd.
>
Everything is fine with testmpd promisc mode, it was just my inattention.
The rest of my previous mail is still valid.
> Hi Beilei.
> I've found a way to reproduce the bug with the testpmd.
> I beleive that the bug is that once an additional MAC is added to
> a i40e port the port stop
Hi Beilei.
I've found a way to reproduce the bug with the testpmd.
I beleive that the bug is that once an additional MAC is added to
a i40e port the port stop receiving packets with source MAC addresses
equal to the added MAC.
First, I modified testpmd and turned off promisc mode by
commenting
Hi Beilei.
> What's the firmware version you used? Did you try testpmd?
I've tried testpmd and didn't find any issues too. Therefore there
are some specific initialization steps that I do in my application
that cause the issue, or there are steps that I don't do, but I should.
Also, I've
Hi Kiselev,
What's the firmware version you used? Did you try testpmd?
I tried testpmd with X710 on my side, the steps are:
testpmd> set fwd rxonly
testpmd> set verbose 1
testpmd> start
testpmd> mac_addr add 0 00:00:5E:00:01:0A
testpmd> stop
testpmd> start
After that, packets with destination
Hi.
I am facing an issue trying to receive packets destined to the
MAC address ipv4_mcast_12 01:00:5E:00:00:12.
The problem is that once I add to a port additional MAC address
00:00:5E:00:01:0A
using rte_eth_dev_mac_addr_add(), the port stop receiving packets destinated
to the address