Hi All,
Need some guidance and help in getting the traffic routed via VTI (
ipsec0 ) interface.I am using the VTI interface to just mark the
traffic and forward.
I am not able to get the traffic forwarding via VTI( ipsec0) interface
and getting the traffic marked, so that it gets protected.
i ha
-- Forwarded message --
From: 曹昊阳
Date: 2017-11-28 10:49 GMT+08:00
Subject: Possibility to remove some vendor ID payload in MM IKEv1?
To: users-requ...@lists.strongswan.org
Hi,
There is some request that ask IPSec client to remove some payload like:
XAUTH
DPD
Cisco Fragmentation
I’m switching over from using IPsec.conf to charon-systemd. Everything is
working for the first user, but I have run into a strange issue (or a dumb user
error!) with the ‘secrets’ section when trying to implement multiple eap
passwords.
If my secrets section has only one eap id/password in it,
Hi,
> Nov 28 16:52:29 yomama charon: 06[KNL] creating delete job for
> CHILD_SA ESP/0xc4bd0735/192.168.1.72
> Nov 28 16:52:29 yomama charon: 06[JOB] CHILD_SA
> ESP/0xc4bd0735/192.168.1.72 not found for delete
Whatever causes these problems is your root cause and needs to be fixed.
Hi,
I create an IPsec network 10.11.0.0/16 and using dnsmasq to assign IP addresses.
I able to route all 10.11.0.0/16 network traffic to an interface. I would like
also route local network 10.11.0.0/16 between client to client to that
interface too.
I can use iptables FORWARD to block client
Hello,
We're experiencing something new on our installation, and we can't
figure out why. Here's the thing : we have NODE 1 and NODE 2
establishing tunnels (ipsec.conf follows), all working well. Except
every rekeying/reauth, we now lose packets.
Why now ? Well, we have restarted NODE 1, changing